Rama IX Bridge
Script error: No such module "Unsubst". Script error: No such module "Infobox".Script error: No such module "Check for unknown parameters".
Rama IX Bridge (Template:Langx, RTGS: Script error: No such module "lang"., Script error: No such module "IPA".) is a bridge in Bangkok, Thailand over the Chao Phraya River. It connects the Yan Nawa District to Rat Burana District as a part of the Tha Ruea – Dao Khanong Section of Chaloem Maha Nakhon Expressway.[1][2][3]
The bridge was named in the honor of King Bhumibol Adulyadej's 60th birthday. The opening date coincided with the king's birthday, with a million people walking over it.[4] It was the first cable-stayed bridge in Thailand[1] and had the second-longest cable-stayed span in the world when it opened in 1987.[5][6]
The original colour scheme, with white pylons and black cables, was replaced with an all yellow scheme representing the king in 2006.[7][8]
A new eight-lane double-pylon cable-stayed bridge paralleling the Rama IX Bridge has been under construction for some time. Part of the Rama III-Dao Khanong-Western Bangkok Outer Ring Road expressway project, it is intended to relieve traffic congestion on the existing single-pylon bridge. The new bridge's official opening will be in early 2024, after which the Rama IX bridge will be closed for an extensive renovation, which includes a sensor system for added safety.[9]
Bridge structure
.jpg){kind=link}
The steel superstructure includes the bridge, rigged mast, and cable. The main span of the bridge, which is stretched between two poles, has a length of 450 meters. The main span is a trapezoid 33 meters wide. The bridge has a walkway along its side. The bridge has two main pylons 3 meters × 4.50 meters. This serves to hold the tension of the cable and weight into the pylon pier. The 121 – 167 mm diameter cables consist of many small wires wound together. The cables vary in length from 50 to 223 meters can absorb the tension for 1,500–3,000 tons.[10]
Approach viaducts
The gradually sloping viaducts on each side of the river are dual-double-T, post-tensioned, concrete structures with thirteen 50-metre double spans on each bank cast in-situ with a steel travelling shutter, up to 40 metres above the ground for sufficient shipping clearance.[4]
The senior engineer Peter Hines[11] overcame a major construction problem: On releasing the 950-ton travelling shuttering, the suction of the shutters could pull the new concrete off. I suggested that as we were only carrying the dead load at the time, we should stress the work to about 2/3rds the finally required stress so that the material would not “hog” (rise in the middle) so much – this worked well. After removing the shuttering, we applied the full stress.[4]
See also
References
<templatestyles src="Reflist/styles.css" />
- ↑ a b Script error: No such module "citation/CS1".Script error: No such module "Unsubst".
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ a b c Beanz means Hines / Peter Hines — the worldwide civil engineer Template:ISBN pages 17 and 18.
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Ramkhamhaeng University Library staff (5 November 2008). "Rama9 Bridge" Ramkhamhaeng University Library.Retrieved 20 October 2013.From http://www.lib.ru.ac.th/journal/bangkok/rama9.html
- ↑ 26 January 2021 obituary and his photo on page 27 of London's Daily Telegraph.
Script error: No such module "Check for unknown parameters".
External links
Template:Cable-stayed bridges in Southeast Asia Template:Chao Phraya River bridges