Beijing dialect

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

Template:Short description Script error: No such module "For". Script error: No such module "Infobox".Template:Template otherTemplate:Main other The Beijing dialect (Template:Lang-zh), also known as Pekingese and Beijingese, is the prestige dialect of Mandarin spoken in the urban area of Beijing, China. It is the phonological basis of Standard Chinese, the official language in the People's Republic of China and one of the official languages of Singapore and the Republic of China. Despite the similarity to Standard Chinese, it is characterized by some "iconic" differences, including the addition of a final rhotic Template:Zhi to some words (e.g. Template:Zhi).Script error: No such module "Unsubst". During the Ming, southern dialectal influences were also introduced into the dialect.[1]

History

Script error: No such module "Labelled list hatnote".

Status as prestige dialect

As the political and cultural capital of China, Beijing has held much historical significance as a city, and its speech has held sway as a lingua franca. Being officially selected to form the basis of the phonology of Standard Mandarin has further contributed to its status as a prestige dialect, or sometimes the prestige dialect of Chinese.[2][3]

Other scholars have referred to it as the "elite Beijing accent."[4]

Until at least the late 18th century, the standard language of the Chinese elite had been the Nanjing dialect, despite political power having already been located in Beijing.[4] Through the nineteenth century, evidence from Western dictionaries suggests that a shift occurred in the court from a Nanjing-based standard to a more local Beijing-based one.[5]

During the Qing dynasty it was used alongside the Manchu language as the official court language.[6]

The establishment of phonology of Standard Chinese dates from a 1913 decision by the Commission on the Unification of Pronunciation, which took the Beijing dialect as its base but retained a lot of phonology from other varieties of Mandarin, resulting in the Old National Pronunciation. This was overturned in 1926, resulting in the "pronunciation of the educated natives of Beijing" officially adopted as the basis for the phonology of Standard Chinese (Guoyu) in 1926.[6][7]

In 1955, the People's Republic of China declared that Standard Chinese was to be "modeled on the pronunciation of Beijing, draws on Northern Chinese as its base dialect, and receives its syntactic norms from exemplary works of vernacular literature".[6][8]

The Beijing dialect has been described as carrying a lot of "cultural heft."[1] According to Zhang Shifang, professor at Beijing Language and Culture University,

"As China's ancient and modern capital, Beijing and thus its linguistic culture as well are representative of our entire nation's civilization... For Beijing people themselves, the Beijing dialect is an important symbol of identity."[1]

Some argue that Cantonese is the "only dialect which has attained a level of prestige that rivals that of the standard national language."[9]

The dialect has been described as "the official language of the entertainment industry", making it also the "showbiz accent."[10]

Even within Beijing the dialect varies. Those north of the Forbidden City spoke with a more "refined" accent than the poorer people, craftsmen, and performers of the south.[1]

Younger generation

Some fear that the vernacular Beijing dialect will disappear.[1] According to a 2010 study by Beijing Union University, 49% of young Beijingers born after 1980 prefer to speak standard Mandarin rather than the Beijing dialect.[11] According to a UN report, nearly 100 Chinese dialects, especially those spoken by the 55 ethnic minorities in China, are endangered.[12]

Mutual intelligibility

The Beijing dialect is generally mutually intelligible with other Mandarin dialects, including Standard Chinese. However it is not intelligible with other Sino-Tibetan languages or even other Chinese languages including Cantonese, Hokkien, and Wu Chinese.Script error: No such module "Unsubst".

The Dungan language is a Sinitic language derived from Mandarin spoken throughout Central Asia, particularly in Kyrgyzstan and Kazakhstan. Speakers like Dungan poet and scholar Iasyr Shivaza and others have reported that Chinese who speak the Beijing dialect could understand Dungan, but Dungans could not understand Beijing Mandarin.[13]

Phonology

Template:More citations needed Script error: No such module "Labelled list hatnote". In fundamental structure, the phonology of the Beijing dialect and Standard Chinese are almost identical. In part, this is because the pronunciation of Standard Chinese was based on Beijing pronunciation.Script error: No such module "Unsubst". However, the Beijing dialect also has vernacular readings of characters which are not only different, but have initial and final combinations that are not present in Standard Chinese, such as Template:Zhi, Template:Zhi, Template:Zhi, Template:Zhi,[14] and Template:Zhi.

Other differences exist, including the proliferation of rhotic vowels. All rhotic vowels are the result of the use of the Template:Zhi Script error: No such module "IPA"., a noun suffix, except for a few words pronounced Script error: No such module "IPA". that do not have this suffix. In Standard Chinese, these also occur but much less often than they appear in the Beijing dialect. This phenomenon is known as Template:Zhi, or rhotacization, as is considered one of the iconic characteristics of Beijing Mandarin.[1]

When /w/ occurs in syllable-initial position, many speakers use [ʋ] before vowels other than [o] as in Template:Zhi Template:Transliteration, and [u] as in Template:Zhi, e.g. Template:Zhi Template:Transliteration Script error: No such module "IPA"..[15][14]

When Template:IPAslink occurs before a glide or vowel it is often eliminated along with any following glides so Template:Zhi is pronounced Template:Zhi and Template:Zhi as Template:Zhi.[16]

Sibilant initials differ significantly between Standard Chinese and the Beijing dialect. The initials Script error: No such module "IPA". Script error: No such module "IPA". are pronounced as Script error: No such module "IPA". in Beijing. Template:Angle bracket Script error: No such module "IPA". are pronounced as Script error: No such module "IPA". by some female speakers, a feature known as Template:Zhi.[14]

Moreover, the Beijing dialect has a few phonetic reductions that are usually considered too "colloquial" for use in Standard Chinese. These are often dependent on which syllables are stressed and unstressed. For example, in fast speech, initial consonants go through lenition if they are in an unstressed syllable: pinyin] Template:Angbr IPA Script error: No such module "IPA". before Template:Angbr IPA become Template:Angbr IPA Script error: No such module "IPA"., so Template:Zhi can sound like Template:Transliteration; Template:Zhi can sound like Template:Transliteration, resulting in a "swallowing of consonants",[1] or Template:Zhi.

Template:Angbr IPA Script error: No such module "IPA". become Template:Angbr IPA Script error: No such module "IPA"., so Template:Zhi can sound like Template:Transliteration; pinyin Template:Angbr IPA Script error: No such module "IPA". go through voicing to become Script error: No such module "IPA".; intervocalic Template:Angbr IPA Script error: No such module "IPA". also lose aspiration and can be voiced, sounding identical to Template:Angbr IPA;[14] similar changes also occur on other consonants.Script error: No such module "Unsubst".

Template:Angbr IPA is voiced and relaxed in intervocalic positions, resulting in [ʋ].Script error: No such module "Unsubst".

Affricates are elided into fricatives when not word initial, such as Template:Zhi becoming Template:Zhi[14]

Some of these changes yield syllables that violate the syllable structure of Standard Chinese, such as Template:Zhi Street, which locals pronounce as Template:Zhi.[17][18][19]

The literary tones of the Beijing dialect tend to be more exaggerated than Standard Chinese. In Standard Chinese, the four tones are high flat, high rising, low dipping, and falling; in the Beijing dialect, the first two tones are higher, the third one dips more prominently, and the fourth one falls more.Script error: No such module "Unsubst". However, toneless syllables are incredibly common in the vernacular Beijing dialect and the third tone is realized as a low tone instead of a dipping tone, known as a "half third tone".Script error: No such module "Unsubst".

Influence on Manchu

Script error: No such module "Labelled list hatnote".

<templatestyles src="Template:Quote_box/styles.css" />

Many of the Manchu words are now pronounced with some Chinese peculiarities of pronunciation, so k before i and e=ch', g before i and e=ch, h and s before i=hs, etc. H before a, o, u, ū, is the guttural Scotch or German ch.

A Manchu Grammar: With Analysed Texts, Paul Georg von Möllendorff, p. 1.[20]

Script error: No such module "Check for unknown parameters".

The Chinese Northern Mandarin dialect spoken in Beijing had a major impact on the phonology of the dialect of Manchu spoken in Beijing, and since Manchu phonology was transcribed into Chinese and European sources based on the sinified pronunciation of Manchus from Beijing, the original authentic Manchu pronunciation is unknown to scholars.[21][22]

The Manchus that lived in Beijing were influenced by the Beijing dialect insofar as pronouncing Manchu sounds was hard for them, and they pronounced Manchu according to Chinese phonetics. In contrast, the Manchus of Aigun, Heilongjiang could both pronounce Manchu sounds properly and mimic the sinified pronunciation of Manchus in Beijing. This was because they learned the Beijing pronunciation from either studying in Beijing or from officials sent to Aigun from Beijing. They could also tell them apart, using the Chinese influenced pronunciation of Beijing to demonstrate that they were better educated and had "superior stature" in society.[23]

Influence on Mongolian

Script error: No such module "Labelled list hatnote".

Script error: No such module "Unsubst".

A substantial proportion of the loanwords in Mongolian are derived from Chinese, with the oldest layer of loanwords in Written Mongolian being Chinese in origin.[24] Much of Mongolian spoken in Inner Mongolia has been affected by Mandarin; lexical influence is claimed to be strong in Khorchin Mongolian, whilst there have been claims of phonetic influence from Mandarin Chinese in the Kharchin variety of Mongolian.[25] The aspirated bilabial stop /pʰ/ and the labial approximant /w/ are phonemes only found in loanwords from Chinese and Tibetan, evident in their limited distribution in Mongolian.[26] Substantial diglossia can also be observed in Inner Mongolia.[27]

Vocabulary

The Beijing dialect typically uses many words that are considered slang, and therefore occur much less or not at all in Standard Chinese. Speakers not native to Beijing may have trouble understanding many or most of these. Many of such slang words employ the rhotic suffix "-r", which is known as erhua. Examples include:

Some Beijing phrases may be somewhat disseminated outside Beijing:

Note that some of the slang are considered to be Template:Zhi, that are carry-overs from an older generation and are no longer used amongst more educated speakers, for example:

Others may be viewed as neologisms used among younger speakers and in "trendier" circles:

Manchu and Mongol loanwords

The dialect also contains both Manchu and Mongol loanwords:[1]

Grammar

There are syntactic differences between Standard Mandarin and the Beijing dialect.[31] Both southern Chinese and southern Mandarin syntactic features were incorporated into Standard Mandarin, while the Beijing dialect retains features of northern Mandarin.[32] The Beijing dialect also uses colloquial expressions differently.

There is a conditional loss of the classifier under certain circumstances after the numeral Template:Zhi, usually pronounced as Template:Zhi with the second tone, as if undergoing tone sandhi with the classifier Template:Zhi after it.[28][32]

In general, Standard Chinese is influenced by Classical Chinese, which makes it more condense and concise. The Beijing dialect can therefore seem more longwinded; but this is sometime balanced by the generally faster speaking rate and phonetic reductions of colloquial Beijing speech.Script error: No such module "Unsubst".

Examples

Script error: No such module "Unsubst".

Template:Fs interlinear

  • Beijing dialect:

Template:Fs interlinear

Notes

Template:Notelist

See also

Script error: No such module "Portal".

References

Template:Reflist

External links

  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1". [1]
  • Script error: No such module "citation/CS1".(the University of Michigan)(Digitized May 14, 2008)

Template:Sino-Tibetan languages Template:Navbox with collapsible groups

  1. a b c d e f g h Script error: No such module "citation/CS1".
  2. Script error: No such module "citation/CS1".
  3. Script error: No such module "citation/CS1".
  4. a b Script error: No such module "citation/CS1".
  5. Script error: No such module "citation/CS1".
  6. a b c Script error: No such module "Citation/CS1".
  7. Script error: No such module "citation/CS1".
  8. Script error: No such module "Citation/CS1".
  9. Script error: No such module "Citation/CS1".
  10. Script error: No such module "citation/CS1".
  11. Script error: No such module "citation/CS1".
  12. Script error: No such module "citation/CS1".
  13. Script error: No such module "citation/CS1".
  14. a b c d e Script error: No such module "citation/CS1".
  15. Script error: No such module "Citation/CS1".
  16. Script error: No such module "citation/CS1".
  17. Language Log
  18. Script error: No such module "citation/CS1".
  19. Script error: No such module "citation/CS1".
  20. Script error: No such module "citation/CS1".[2]
  21. Script error: No such module "citation/CS1".
  22. Script error: No such module "citation/CS1".
  23. Script error: No such module "citation/CS1".
  24. Script error: No such module "citation/CS1".
  25. Script error: No such module "citation/CS1".
  26. Script error: No such module "citation/CS1".
  27. Script error: No such module "citation/CS1".
  28. a b Script error: No such module "citation/CS1".
  29. Script error: No such module "Citation/CS1".
  30. Script error: No such module "citation/CS1".
  31. Script error: No such module "citation/CS1".
  32. a b Script error: No such module "citation/CS1".