Watts Bar Dam

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

Script error: No such module "Unsubst". Template:Use American English Script error: No such module "Type in location".Script error: No such module "Infobox".Script error: No such module "Check for unknown parameters".Expression error: Unexpected < operator Watts Bar Dam is a hydroelectric dam on the Tennessee River in Meigs and Rhea counties in Tennessee, United States. The dam is one of nine dams on the main Tennessee River channel operated by the Tennessee Valley Authority, which built the dam in the early 1940s to provide flood control and electricity and to help create a continuous navigable channel along the entire length of the river. The dam is the technical boundary between the Script error: No such module "convert". Watts Bar Lake— which it impounds— and Script error: No such module "convert". Chickamauga Lake, which stretches from the dam's tailwaters southward to Chattanooga.

Watts Bar Dam is named for Watt Island, a sandbar located at the dam site prior to the dam's construction.[1]

Location

Watts Bar Dam is located approximately Script error: No such module "convert". upstream from the mouth of the Tennessee River, roughly halfway between Knoxville and Chattanooga. Just north of the dam, the Tennessee absorbs the Piney River, which flows down from the Cumberland Plateau to the west. The nearest towns of note are Spring City (a few miles to the northwest) and Decatur (a few miles to the south). Tennessee State Route 68 crosses Watts Bar Dam, connecting the area with Interstate 75 to the east and U.S. Route 27 to the west.

Capacity

Watts Bar Lake extends Script error: No such module "convert". northeast from the dam to Fort Loudoun Dam, and includes parts of Meigs, Rhea, Roane, and Loudon counties. In addition to its main Tennessee River channel, Watts Bar Lake is navigable across the lower Script error: No such module "convert". of the Clinch River (up to Melton Hill Dam) and the lower Script error: No such module "convert". of the Emory River.[2] The cities of Kingston, Spring City, Harriman, Loudon, Rockwood, and Lenoir City all have waterfronts on Watts Bar Lake.

Watts Bar provides Script error: No such module "convert". of shoreline and over Script error: No such module "convert". of water surface. Watts Bar Dam is Script error: No such module "convert". high and stretches Script error: No such module "convert". across the Tennessee River. Watts Bar has a storage capacity of Script error: No such module "convert".,[3] a flood-storage capacity of Script error: No such module "convert"., and generates 175 megawatts of electricity. The dam's navigational lock is Script error: No such module "convert"., and raises and lowers vessels Script error: No such module "convert". from Watts Bar Lake to Chickamauga Lake and vice versa.[2]

Background and construction

File:Watts-bar-dam-design-tva1.jpg
TVA's design plan for Watts Bar Dam, circa 1939

Watt Island's potential as a dam site had been recognized since the early 1870s, when the U.S. Army Corps of Engineers built a dike at the tip of the island to improve flow in the main river channel. The Corps carried out dredging work at the island between 1911 and 1913 that deepened the main channel, and recommended the site (originally known as the "White Creek site" after a stream that joins the Tennessee a few miles upriver) for a dam in 1930. In 1936, the Tennessee Valley Authority assumed direction of the site as part of its unified strategy to build (and acquire) a series of dams along the Tennessee River to improve navigation and flood control, and aide in the region's economic development. TVA was given authorization to build a dam at Watt Island on March 16, 1939, and construction on Watts Bar Dam began on July 1, 1939.[1]

File:Checking the alignment of a turbine shaft at the top of the guide bearing in TVA's hydroelectric plant, Watts Bar Dam, Tenn.jpg
Workers test a turbine shaft at Watts Bar, June 1942

The construction of Watts Bar Dam and its accompanying reservoir required the purchase of Script error: No such module "convert". of land and flowage rights, Script error: No such module "convert". of which were forested and had to be cleared. 832 families, 17 cemeteries, and Script error: No such module "convert". of roads were relocated. An earthen dike was built to protect downtown Kingston from the reservoir's backwaters, and minor adjustments were necessary to the riverfronts of Spring City, Harriman, Wheat, and Loudon. The community of Rhea Springs, located along the Piney River a few miles upstream from the river's mouth, was completely inundated.[1]

Earl M. Qualls, car dumper operator at Watts Bar, in June 1942.
Earl M. Qualls, car dumper operator at Watts Bar, in June 1942. This image was distributed by the Office of War information to demonstrate the importance of the dam's electricity as well as the contribution of African-Americans to the war effort.

The dam's original design called for the installation of three generators, but with the outbreak of World War II in 1941, energy demand in the region skyrocketed, and the design was modified to include a fourth and fifth generator. The dam was completed and the gates closed on January 1, 1942. The first generator went online February 11 of that year, followed by the second generator on April 6 and the third on July 23. The fourth generator went online March 12, 1944 and the fifth followed on April 24, 1944. The Army Corps of Engineers designed the dam's lock, which went into operation on February 16, 1942.[1]

Watts Bar Lake was one of the water bodies affected by a massive release of fly ash in 2008 from the Kingston Fossil Plant coal fly ash slurry spill.[4]

See also

<templatestyles src="Stack/styles.css"/>

Script error: No such module "Portal".

Script error: No such module "Check for unknown parameters".

References

<templatestyles src="Reflist/styles.css" />

  1. ↑ a b c d Tennessee Valley Authority, The Watts Bar Project: A Comprehensive Report on the Planning, Design, Construction, and Initial Operations of the Watts Bar Project, Technical Report No. 9 (Washington, D.C.: U.S. Government Printing Office, 1949), 1-11, 39-47.
  2. ↑ a b Tennessee Valley Authority, Watts Bar Reservoir. Retrieved: 10 January 2009.
  3. ↑ Cite error: Script error: No such module "Namespace detect".Script error: No such module "Namespace detect".
  4. ↑ Script error: No such module "citation/CS1".

Script error: No such module "Check for unknown parameters".

External links

Script error: No such module "Side box".

Template:Tennessee River Dams Script error: No such module "Navbox".

Retrieved from "http://debianws.lexgopc.com/wiki143/index.php?title=Watts_Bar_Dam&oldid=1407986"