Utah State Route 280
Template:Short description Template:Use American English Template:Use mdy dates Script error: No such module "Infobox".Template:Template otherScript error: No such module "Infobox road/errors".Script error: No such module "Check for unknown parameters".[[Category:Infobox road instances Template:Infobox road/meta/mask/category]] State Route 280 (SR-280) is a Script error: No such module "convert". state highway completely within Summit County in the northern portion of the U.S. state of Utah. SR-280 connects Interstate 80 (I-80) in Coalville to Main Street in the same town. The entirety of the highway is named 100 South.
Route description
The highway begins at a diamond interchange on I-80 at exit 162 west of the center of Coalville and heads northwest on a two-lane undivided highway. SR-280 enters downtown Coalville and terminates on Main Street.[1]
History
Prior to the construction of I-80, SR-4 (US-189) passed through Coalville on Main Street. To retain access to the town once I-80 replaced the surface road, the State Road Commission designated State Route 280 in 1961 as a short connection between I-80 and Main Street on Icy Springs Road (100 South).[2] Before serving its intended purpose, the road briefly formed part of SR-2 (which had replaced SR-4 in 1962) and US-189, since I-80 was completed west of SR-280 before the portion east to Echo opened. A temporary ramp left the right side of SR-280 where the ramp to I-80 east now begins, and curved left into the westbound lanes of I-80 just before the Interstate crosses under SR-280.[3]
Major intersections
Template:Jcttop/core Template:UTint Template:UTint Script error: No such module "Jctbtm".
References
<templatestyles src="Reflist/styles.css" />
- ↑ Script error: No such module "citation/CS1".
- ↑ Utah Department of Transportation, Highway Resolutions: Script error: No such module "citation/CS1". (550 KB)Script error: No such module "Check for unknown parameters"., updated December 2007, accessed May 2008
- ↑ Google Maps street maps and USGS topographic maps, accessed May 2008 via ACME Mapper
Script error: No such module "Check for unknown parameters".