Utah State Route 110

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

Template:Short description Script error: No such module "For". Template:Use American English Template:Use mdy dates Script error: No such module "Infobox".Template:Template otherScript error: No such module "Infobox road/errors".Script error: No such module "Check for unknown parameters".[[Category:Infobox road instances Template:Infobox road/meta/mask/category]] State Route 110 (SR-110) is a state highway in the U.S. state of Utah, connecting SR-127 in Syracuse with SR-37 in West Point. The highway is routed entirely on 4500 West.

Route description

SR-110 follows 4500 West in the Weber Valley, near the east shore of the Great Salt Lake and west of the Hooper Canal. The relatively flat route, at about Script error: No such module "convert". above sea level, travels north from SR-127 to SR-37 through the Ogden suburbs of Syracuse and West Point.[1]

History

State Route 195 was created in 1935, running west and north from what was then the end of SR-108 in Syracuse through West Point to the then-end of SR-37 in Hooper.[2] An extension of SR-37 cut back the north end of SR-195 to a point west of Clinton in 1945,[3] and in 1947 the latter route was removed from the state highway system.[4] The portion of SR-195 heading west from SR-108 was restored in 1965 as part of SR-127, and in 1969 a new SR-110 brought the remainder of old SR-195 back onto the system.[5]

Major intersections

Template:Jcttop/core Template:UTint Template:UTint Template:UTint Script error: No such module "Jctbtm".

References

Template:Attached KML

<templatestyles src="Reflist/styles.css" />

  1. Google Maps street maps and USGS topographic maps, accessed July 2008 via ACME Mapper
  2. Script error: No such module "citation/CS1".
  3. Script error: No such module "citation/CS1".
  4. Script error: No such module "citation/CS1".
  5. Utah Department of Transportation, State Route History Template:Webarchive, accessed July 2007

Script error: No such module "Check for unknown parameters".