Titanium aluminide

Template:Short description Template:Cs1 config Template:Chembox Titanium aluminide (chemical formula TiAl), commonly gamma titanium, is an intermetallic chemical compound. It is lightweight and resistant to oxidation and heat, but has low ductility. The density of γ-TiAl is about 4.0 g/cm³. It finds use in several applications including aircraft, jet engines, sporting equipment and automobiles. The development of TiAl based alloys began circa 1970. The alloys have been used in these applications only since about 2000.

Titanium aluminide has three major intermetallic compounds: gamma titanium aluminide (gamma TiAl, γ-TiAl), alpha 2-Ti₃Al and TiAl₃. Among the three, gamma TiAl has received the most interest and applications.

Applications of gamma-TiAl

File:MAUD-MTEX-TiAl-hasylab-2003-Liss.png

Pole figures displaying crystallographic texture of gamma-TiAl in a rolled sheet of alpha2-gamma alloy, as measured by high energy X-rays.

Gamma TiAl has excellent mechanical properties and oxidation and corrosion resistance at elevated temperatures (over 600Template:Nbsp°C), which makes it a possible replacement for traditional Ni based superalloy components in aircraft turbine engines.

TiAl-based alloys have potential to increase the thrust-to-weight ratio in aircraft engines. This is especially the case with the engine's low-pressure turbine blades and the high-pressure compressor blades. These are traditionally made of Ni-based superalloy, which is nearly twice as dense as TiAl-based alloys. Some gamma titanium aluminide alloys retain strength and oxidation resistance to 1000 °C, which is 400 °C higher than the operating temperature limit of conventional titanium alloys.

General Electric uses gamma TiAl for the low-pressure turbine blades on its GEnx engine, which powers the Boeing 787 and Boeing 747-8 aircraft. This was the first large-scale use of this material on a commercial jet engine when it entered service in 2011. The TiAl LPT blades are cast by Precision Castparts Corp. and Avio s.p.a. Machining of the Stage 6, and Stage 7 LPT blades is performed by Moeller Manufacturing. An alternate pathway for production of the gamma TiAl blades for the GEnx and GE9x engines using additive manufacturing is being explored.

In 2019 a new 55Template:Nbspg lightweight version of the Omega Seamaster wristwatch was made, using gamma titanium aluminide for the case, backcase and crown, and a titanium dial and mechanism in Ti 6/4 (grade 5). The retail price of this watch at £37,240 was nine times that of the basic Seamaster and comparable to the top of the range platinum-cased version with a moonphase complication.

Alpha 2-Ti₃Al

Alpha 2-Ti₃Al is an intermetallic compound of titanium and aluminum, belonging to the Ti-Al system of advanced high-temperature materials. It is primarily used in aerospace and other high-performance applications due to its balance of strength, lightweight properties, and oxidation resistance.

It has an ordered hexagonal (D0₁₉) crystal structure, which makes it distinct from the more commonly known γ-TiAl (gamma titanium aluminide).

Higher strength than conventional titanium alloys, especially at high temperatures. More brittle than pure titanium but tougher than γ-TiAl, making it useful in applications requiring a trade-off between toughness and lightweight properties.

Improved high-temperature oxidation resistance compared to pure titanium, but generally not as good as γ-TiAl or other high-temperature alloys like nickel-based superalloys. Often used with coatings to further enhance oxidation resistance.

Density and Lightweight Properties:

Lower density than traditional nickel-based superalloys, making it attractive for aerospace applications where weight reduction is crucial.

Operates effectively at 600–800 °C, making it useful in jet engines, turbine components, and hypersonic vehicles.

Applications of Alpha 2-Ti₃Al:

Aerospace: Used in jet engine components, compressor blades, and airframe structures where high strength and lightweight properties are needed.

Automotive (High-Performance Vehicles): Some high-end applications in racing engines.

Military and Defense: Structural components in hypersonic aircraft and advanced missiles.

Energy Sector: Potential use in turbine components for power generation.

Challenges and Limitations:

Brittleness: More brittle than conventional titanium alloys, requiring careful processing and potential use of composite materials.

Manufacturing Complexity: Difficult to process and fabricate due to its intermetallic nature, often requiring advanced techniques like powder metallurgy, additive manufacturing, or specialized forging methods.

Oxidation Resistance: While better than standard titanium, it still requires protective coatings for long-term use in extreme environments.

TiAl₃

TiAl₃ has the lowest density of 3.4 g/cm³, the highest micro hardness of 465–670 kg/mm₂ and the best oxidation resistance even at 1 000 °C. However, the applications of TiAl₃ in the engineering and aerospace fields are limited by its poor ductility. In addition, the loss of ductility at ambient temperature is usually accompanied by a change of fracture mode from ductile transgranular to brittle intergranular or to brittle cleavage. Despite the fact that a lot of toughening strategies have been developed to improve their toughness, machining quality is still a difficult problem to tackle. Near-net shape manufacturing technology is considered as one of the best choices for preparing such materials. {date=July 2022}

External links

• Machining Gamma Titanium Aluminide Components - Moeller Manufacturing
• Titanium Aluminide Applications in the HighSpeed Civil Transport
• Titanium Aluminides - Intermetallics on azom.com.
• Power House (GEnx TiAl LPT Blade Announcement)