Suspension tower
Template:More sources needed In an electric power transmission line, a suspension tower is where the conductors are simply suspended from the tower, the mechanical tension being the same on each side.[1]
In this case, the tower is supposed to carry a downward force, and a lateral force, but not a longitudinal force.
These may have, for each conductor, an insulator string hanging down from the tower, or two strings making a "V" shape. In either case, sometimes several insulator strings are used in parallel to give higher mechanical strength. These are used where a transmission line continues in a straight line, or turns through a small angle. In other cases, a tension tower (C or D Towers) is used.
-
Suspension towers of a 110 kV power line in Germany
-
A suspension tower of a 330 kV powerline in Ukraine
-
A suspension tower of a 1150 kV powerline in Russia
-
A suspension tower of a 35 kV powerline in Ukraine
-
A guyed tower in Russia
-
In France, it is common to bend lines at suspension towers with single insulators pulled to the sideIn France, it is common to bend lines at suspension towers with single insulators pulled to the side
-
A suspension tower, UK
-
Suspension towers in Sweden
-
Row of suspension pylons near Amsterdam in the Netherlands
See also
References
<templatestyles src="Reflist/styles.css" />
- ↑ Script error: No such module "citation/CS1".
Script error: No such module "Check for unknown parameters".