Sodium ferrocyanide

Template:Chembox image cellTemplate:Chembox AllOtherNamesTemplate:Chembox headerbarTemplate:Chembox IndexlistTemplate:Chembox JmolTemplate:Chembox ChEMBLTemplate:Chembox ECHATemplate:Chembox E numberTemplate:Chembox IUPHAR ligandTemplate:Chembox UNIITemplate:Chembox CompToxTemplate:Chembox headerbarTemplate:Chembox SolubilityInWaterTemplate:Chembox headerbarTemplate:Chembox headerbarTemplate:Chembox GHS (set)Template:Chembox headerbarTemplate:Chembox Datapage checkTemplate:Chembox Footer

Sodium ferrocyanide

Template:Longitem	Template:Unbulleted list
ChEBI	Template:Unbulleted list
ChemSpider	Template:Unbulleted list
DrugBank	Template:Unbulleted list
EC Number	Template:Unbulleted list
KEGG	Template:Unbulleted list
Template:Longitem	Template:Unbulleted list
RTECS number	Template:Unbulleted list
Template:Longitem	Na4[Fe(CN)6]
Molar mass	303.91 g/mol
Appearance	pale yellow crystals
Odor	odorless
Density	1.458 g/cm3
Melting point	Template:Chembox CalcTemperatures
Template:Longitem	1.530
Template:Longitem	monoclinic
Template:Longitem	Sodium ferricyanide (Red prussiate of soda)
Template:Longitem	Potassium ferrocyanide

Sodium ferrocyanide is the sodium salt of the coordination compound of formula Template:Chem2. In its hydrous form, Template:Chem2[[water of crystallization|Template:Chem2]] (sodium ferrocyanide decahydrate), it is sometimes known as yellow prussiate of soda. It is a yellow crystalline solid that is soluble in water and insoluble in alcohol. The yellow color is the color of ferrocyanide anion. Despite the presence of the cyanide ligands, sodium ferrocyanide has low toxicity (acceptable daily intake 0–0.025 mg/kg body weight). The ferrocyanides are less toxic than many salts of cyanide, because they tend not to release free cyanide. However, like all ferrocyanide salt solutions, addition of an acid or exposure to UV light can result in the production of hydrogen cyanide gas, which is extremely toxic.

Uses

When combined with a Fe(III) salt, it converts to a deep blue pigment called Prussian blue, Template:Chem2. It is used as a stabilizer for the coating on welding rods. In the petroleum industry, it is used for removal of mercaptans.

In the EU, ferrocyanides (E 535–538) were, as of 2018, solely authorized as additives in salt and salt substitutes, where they serve as anticaking agents. The kidneys are the organ susceptible to ferrocyanide toxicity, but according to the EFSA, ferrocyanides are of no safety concern at the levels at which they are used.

Production

Sodium ferrocyanide is produced industrially from hydrogen cyanide, ferrous chloride, and calcium hydroxide, the combination of which affords Template:Chem2. A solution of this salt is then treated with sodium salts to precipitate the mixed calcium-sodium salt Template:Chem2, which in turn is treated with sodium carbonate to give the tetrasodium salt.