SEAT 128
Template:Refimprove Template:Main other Script error: No such module "Infobox".Template:Template otherScript error: No such module "Check for unknown parameters".
The SEAT 128 is a 3-door hatchback coupé manufactured by the Spanish automaker SEAT from 1976 to 1980. It is essentially a sporting, three-door hatchback version of the Fiat 128. In Spain it was available with two engine options from the Fiat 124 engine family, the 1.2-litre and the more powerful and well-known 1430 engine.
Designed at Fiat Centro Stile, the Fiat 128 3P went on sale in Italy a year earlier; the body panels were shipped from Turin to SEAT's Barcelona assembly plant.[1] It was marketed as "Three Times SEAT" in order to underline its triple combination of sportiness, versatility, and looks. The car was aimed at rich, young drivers. However, the 128 never enjoyed great commercial success, since in this period of economic recession and transition in Spain most people opted for the smaller, less expensive SEAT 127.Script error: No such module "Unsubst".
A total of 31 893 units were built by SEAT in four years of production.[2]
Technical data
SEAT 128 (1977)[3]
| SEAT | 1200 Engine | 1430 Engine |
|---|---|---|
| Engine: | 4-cylinder-inline engine (four-stroke), front-mounted | |
| Displacement: | 1,197 cc | 1,438 cc |
| Bore x Stroke: | Template:Convert x Template:Convert | Template:Convert x Template:Convert |
| Max. Power @ rpm: | Template:Convert / 5,600 | Template:Convert / 5,400 |
| Max. Torque @ rpm: | Template:Convert / 3,700 | Template:Convert / 3,400 |
| Compression Ratio: | 8.8:1 | 9.0:1 |
| Fuel system: | 1 downdraft carb. (2bbl) | |
| Valvetrain: | OHV, camshaft in block, tooth belt | |
| Cooling: | Water | |
| Gearbox: | 4-speed-manual, front wheel drive | |
| Front suspension: | MacPherson struts, coil springs, hydraulic telescopic shock absorbers | |
| Rear suspension: | Double wishbones, struts, transverse leaf spring | |
| Brakes: | Front disc brakes (Ø 227 mm), rear drum brakes | |
| Steering: | Rack-and-pinion steering | |
| Body: | Steel, unibody construction | |
| Track front/rear: | Template:Convert / Template:Convert | |
| Wheelbase: | Template:Convert | |
| Length x Width x Height: | Template:Convert x Template:Convert x Template:Convert | |
| Weight: | Template:Convert | Template:Convert |
| Top speed: | Template:Convert | Template:Convert |
| 0–100 km/h (0-62 mph): | n.a. | n.a. |
| Fuel consumption (DIN): | n.a. | n.a. |
References
Template:Sister project Template:Reflist
Script error: No such module "Navbox". Template:Early SEAT vehicles