Rolls-Royce Clyde

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

Template:Short description Script error: No such module "Unsubst". Template:Use British English

RB.39 Clyde
Script error: No such module "InfoboxImage".
Rolls-Royce Clyde on display at the Rolls-Royce Heritage Trust, Derby
Type Turboprop
Manufacturer Rolls-Royce Limited
First run 5 August 1945[1]
Number built 9[2]

The Rolls-Royce RB.39 Clyde was Rolls-Royce's first purpose-designed turboprop engine and the first turboprop engine to pass its civil and military type-tests.[2][3]

As with subsequent Rolls-Royce gas turbines, it was named after a river, the River Clyde.

Design and development

The Clyde used a two-shaft design, with an axial compressor based on that of the Metrovick F.2[4][5] for the low-pressure section, and a single-sided centrifugal compressor scaled up from the Merlin 46 supercharger[6] as the high-pressure stage, both mounted on the HP shaft and driven by a single stage HP turbine. A single stage power turbine drove the front mounted propeller reduction gearbox via the concentric LP shaft. A fairly novel feature of this compact gearbox was the power output to contra-rotating propellers.[7]

The Clyde was a long engine with the axial LP compressor in front of what was, in effect, a scaled-down Derwent engine. Accessories were grouped around the axial compressor which conveniently narrowed towards the rear. Cooling for turbines and turbine bearings came from a small impeller on the main shaft as well as air taken from the axial and centrifugal compressors. Testing of the development engines exceeded expectations with the engine soon being rated at 4,030 eshp.[5][1] During testing potentially destructive vibrations were found originating in the straight-cut spur gears in the reduction gearbox.[1]

The engine was selected as the main engine of the Westland Wyvern TF Mk.2 strike aircraft.[2] However, despite the promising performance of the test engines Ernest Hives felt that pure-jets such as the Avon were the future and the Clyde programme was terminated, forcing Westland to use the less than satisfactory Armstrong Siddeley Python on the production Wyverns.[2] and so Rolls-Royce's first production turboprop would be the Dart.

Engines on display

A part sectioned example is on display at the Rolls-Royce Heritage Trust, (Derby).

Specifications (Clyde)

File:Rolls-Royce Clyde RRHT Derby (side view).jpg
Side view with sectioned combustion chamber

Data from Turbojet History and Development 1930-1960 vol.1.[1]

General characteristics

  • Type: Two-Shaft Turboprop
  • Length: Script error: No such module "convert".
  • Diameter: Script error: No such module "convert".
  • Dry weight: Script error: No such module "convert". (dry)

Components

  • Compressor: LP - 9 stage axial, HP - Single centrifugal stage
  • Combustors: Eleven can-type combustion chambers
  • Turbine: HP' - single stage axial, Power - single stage axial
  • Fuel type: Kerosene (jet fuel grade)e
  • Oil system: Pressure spray scavenge system

Performance

See also

Related lists

References

Script error: No such module "Side box".

Notes

<templatestyles src="Reflist/styles.css" />

  1. a b c d Script error: No such module "citation/CS1".
  2. a b c d Script error: No such module "citation/CS1".
  3. Flight 1954, p. 582.
  4. Script error: No such module "citation/CS1".
  5. a b "World Encyclopedia of Aero Engines – 5th edition" by Bill Gunston, Sutton Publishing, 2006, P.195
  6. Script error: No such module "Citation/CS1".
  7. "Not much of an Engineer" by Sir Stanley Hooker, Airlife Publishing Ltd, 1984, P.227

Script error: No such module "Check for unknown parameters".

Bibliography

<templatestyles src="Refbegin/styles.css" />

Script error: No such module "Navbox".