Rapidity

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

Template:Short description

File:Inverse Hyperbolic Tangent.svg
Rapidity is the value of artanh(v / c)Script error: No such module "Check for unknown parameters". for velocity Template:Mvar and speed of light Template:Mvar

In special relativity, the classical concept of velocity is converted to rapidity to accommodate the limit determined by the speed of light. Velocities must be combined by Einstein's velocity-addition formula. For low speeds, rapidity and velocity are almost exactly proportional but, for higher velocities, rapidity takes a larger value, with the rapidity of light being infinite.

Mathematically, rapidity can be defined as the hyperbolic angle that differentiates two frames of reference in relative motion, each frame being associated with distance and time coordinates.

Using the inverse hyperbolic function artanhScript error: No such module "Check for unknown parameters"., the rapidity Template:Mvar corresponding to velocity Template:Mvar is w = artanh(v/c)Script error: No such module "Check for unknown parameters". where Template:Mvar is the speed of light. For low speeds, by the small-angle approximation, Template:Mvar is approximately v / cScript error: No such module "Check for unknown parameters".. Since in relativity any velocity Template:Mvar is constrained to the interval c < v < cScript error: No such module "Check for unknown parameters". the ratio v / cScript error: No such module "Check for unknown parameters". satisfies −1 < v / c < 1Script error: No such module "Check for unknown parameters".. The inverse hyperbolic tangent has the unit interval (−1, 1)Script error: No such module "Check for unknown parameters". for its domain and the whole real line for its image; that is, the interval c < v < cScript error: No such module "Check for unknown parameters". maps onto −∞ < w < ∞Script error: No such module "Check for unknown parameters"..

History

File:Add velocity Earth POV.svg
Time (t) and space (x) axes: moving observers have primed or double primed axes

In 1908 Hermann Minkowski explained how the Lorentz transformation could be seen as simply a hyperbolic rotation of the spacetime coordinates, i.e., a rotation through an imaginary angle.[1] This angle therefore represents (in one spatial dimension) a simple additive measure of the velocity between frames.[2] The rapidity parameter replacing velocity was introduced in 1910 by Vladimir Varićak[3] and by E. T. Whittaker.[4] The parameter was named rapidity by Alfred Robb (1911)[5] and this term was adopted by many subsequent authors, such as Ludwik Silberstein (1914), Frank Morley (1936) and Wolfgang Rindler (2001).

Minkowski diagram

Rapidity is the parameter expressing variability of an event on the hyperbola which represents the future events one time unit away from the origin O. These events can be expressed (sinh w, cosh w) where sinh is the hyperbolic sine and cosh is the hyperbolic cosine. Note that as speed and w increase, the axes tilt toward the diagonal. In fact, they remain in a relation of hyperbolic orthogonality whatever the value of w. The appropriate x-axis is the hyperplane of simultaneity corresponding to rapidity w at the origin.

The hyperbola can be associated with the unit hyperbola. A moving reference frame sees the spacetime in the same way the rest frame does, so a transformation theory is necessary to explain the adaptation of one to the other. When the unit hyperbola is interpreted as a one-parameter group that acts on the future, and correspondingly on the past and elsewhere, then the Minkowski configuration expresses the relativity of simultaneity and other features of relativity.

Lorentz boost

The transformations relating reference frames are associated with Hendrik Lorentz. To make a moving frame with rapidity w into the rest frame with perpendicular axes of time and space, one applies a hyperbolic rotation of parameter −w. Since cosh (–w) = cosh w and sinh –w = – sinh w, the following matrix representation of the hyperbolic rotation will bring the moving frame into perpendicularity (though all frames keep hyperbolic orthogonality since that relation is invariant under hyperbolic rotation).

A Lorentz boost is a vector-matrix product (ctx)=(coshwsinhwsinhwcoshw)(ctx)=Λ(w)(ctx).

The matrix Λ(w)Script error: No such module "Check for unknown parameters". is of the type (pqqp) with Template:Mvar and Template:Mvar satisfying p2q2 = 1Script error: No such module "Check for unknown parameters"., so that (p, q)Script error: No such module "Check for unknown parameters". lies on the unit hyperbola. Such matrices form the indefinite orthogonal group O(1,1) with one-dimensional Lie algebra spanned by the anti-diagonal unit matrix, showing that the rapidity is the coordinate on this Lie algebra. In matrix exponential notation, Λ(w)Script error: No such module "Check for unknown parameters". can be expressed as Λ(w)=e𝐙w, where ZScript error: No such module "Check for unknown parameters". is the negative of the anti-diagonal unit matrix 𝐙=(0110). Since Z2 is the identity, Z is a hyperbolic unit.

Velocity addition

A key property of the matrix exponential is e𝐗(s+t)=e𝐗se𝐗t from which immediately follows that Λ(w1+w2)=Λ(w1)Λ(w2). This establishes the useful additive property of rapidity: if AScript error: No such module "Check for unknown parameters"., BScript error: No such module "Check for unknown parameters". and CScript error: No such module "Check for unknown parameters". are frames of reference, then wAC=wAB+wBC, where wPQScript error: No such module "Check for unknown parameters". denotes the rapidity of a frame of reference QScript error: No such module "Check for unknown parameters". relative to a frame of reference PScript error: No such module "Check for unknown parameters".. The simplicity of this formula contrasts with the complexity of the corresponding velocity-addition formula.

As we can see from the Lorentz transformation above, the Lorentz factor identifies with cosh wScript error: No such module "Check for unknown parameters". γ=11v2/c2=11β2coshw, so the rapidity Template:Mvar is implicitly used as a hyperbolic angle in the Lorentz transformation expressions using Template:Mvar and Template:Mvar. We relate rapidities to the velocity-addition formula u=u1+u21+u1u2c2 by recognizing βi=uic=tanhwi and so tanhw=tanhw1+tanhw21+tanhw1tanhw2=tanh(w1+w2)

Proper acceleration (the acceleration 'felt' by the object being accelerated) is the rate of change of rapidity with respect to proper time (time as measured by the object undergoing acceleration itself). Therefore, the rapidity of an object in a given frame can be viewed simply as the velocity of that object as would be calculated non-relativistically by an inertial guidance system on board the object itself if it accelerated from rest in that frame to its given speed.

Hyperbolic functions

The product of Template:Mvar and Template:Mvar appears frequently in the equations of special relativity. As a result, some authors define an explicit parameter α for this expression, which is, from above: α=βγ=tanhwcoshw=sinhw

This relationship uses hyperbolic functions of the rapidity w to relate these parameters of special relativity, as Minkowski had observed:

α=sinhw β=tanhw γ=coshw

Exponential and logarithmic relations

From the above expressions we have ew=cosh(w)+sinh(w)=γ(1+β)=1+β1β2=1+vc1vc, and thus ew=cosh(w)sinh(w)=γ(1β)=1β1β2=1vc1+vc. or explicitly w=ln[γ(1+β)]=ln[γ(1β)].

Doppler effect

The Doppler-shift factor, for the longitudinal case with source and receiver moving directly towards or away from each other, that is associated with rapidity Template:Mvar is k=ew.

In experimental particle physics

The energy Template:Mvar and scalar momentum |p|Script error: No such module "Check for unknown parameters". of a particle of non-zero (rest) mass Template:Mvar are given by: E=γmc2|𝐩|=γmv. With the definition of Template:Mvar w=artanhvc=artanhβ, and thus with coshw=cosh(artanhvc)=11v2c2=γ sinhw=sinh(artanhvc)=vc1v2c2=βγ=α, the energy and scalar momentum can be written as: E=mc2coshw|𝐩|=mcsinhw.

So, rapidity can be calculated from measured energy and momentum by w=artanh|𝐩|cE=12lnE+|𝐩|cE|𝐩|c=lnE+|𝐩|cmc2.

However, experimental particle physicists often use a modified definition of rapidity relative to a beam axis y=12lnE+pzcEpzc, where pzScript error: No such module "Check for unknown parameters". is the component of momentum along the beam axis.[6] This is the rapidity of the boost along the beam axis which takes an observer from the lab frame to a frame in which the particle moves only perpendicular to the beam. Related to this is the concept of pseudorapidity.

Rapidity relative to a beam axis can also be expressed as y=lnE+pzcm2c4+pT2c2.

See also

Notes and references

<templatestyles src="Reflist/styles.css" />

  1. Hermann Minkowski (1908) Fundamental Equations for Electromagnetic Processes in Moving Bodies via Wikisource
  2. Sommerfeld, Phys. Z 1909
  3. Vladimir Varicak (1910) Application of Lobachevskian Geometry in the Theory of Relativity Physikalische Zeitschrift via Wikisource
  4. E. T. Whittaker (1910) A History of the Theories of Aether and Electricity, page 441.
  5. Alfred Robb (1911) Optical Geometry of Motion p.9
  6. Amsler, C. et al., "The Review of Particle Physics", Physics Letters B 667 (2008) 1, Section 38.5.2

Script error: No such module "Check for unknown parameters".

Template:Relativity