Queen post
Script error: No such module "Infobox".Template:Template otherScript error: No such module "Check for unknown parameters".
A queen post is a tension member in a truss that can span longer openings than a king post truss. A king post uses one central supporting post, whereas the queen post truss uses two.[1] Even though it is a tension member, rather than a compression member, they are commonly still called a post. A queen post is often confused with a queen strut, one of two compression members in roof framing which do not form a truss in the engineering sense.[2]
The double punch truss appeared in Central Europe during the Renaissance.[3]
Architecture
_PA.jpg){kind=link}
A queen-post bridge has two uprights, placed about one-third of the way from each end of the truss. They are connected across the top by a beam and use a diagonal brace between the outer edges. The central square between the two verticals is either unbraced (on shorter spans), or has one or two diagonal braces for rigidity. A single diagonal reaches between opposite corners; two diagonal braces may either reach from the bottom of each upright post to the center of the upper beam, or form a corner-to-corner "X" inside the square.[4]
See also
References
<templatestyles src="Reflist/styles.css" />
- ↑ Gopi, Satheesh. Basic civil engineering. New Delhi: Dorling Kindersley (India) Pvt. Ltd., 2010. 155. Print. Template:ISBN
- ↑ "Timber Framing for Beginners: VI. Glossary of Terms" Timber Framing Vol. 68 June 2003. 12. Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ American Barns and Covered Bridges, Eric Sloane, Wilfred Funk, Inc. New York, New York; 1954, pg 96-97
Script error: No such module "Check for unknown parameters".