Ontario Highway 98

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

Template:Good article Template:Short description Script error: No such module "Infobox".Template:Template otherScript error: No such module "Infobox road/errors".Script error: No such module "Check for unknown parameters".[[Category:Infobox road instances Template:Infobox road/meta/mask/category]] King's Highway 98, commonly referred to as Highway 98, was a provincially maintained highway in the Canadian province of Ontario, designated as part of the provincial highway system between 1939 and 1971. The route travelled through the northern part of Essex County and through south-central Chatham-Kent, extending Script error: No such module "convert". from Windsor to Blenheim. Since 1998, it has been known as Essex County RoadScript error: No such module "String".46 between Windsor and Tilbury, and Chatham-Kent RoadScript error: No such module "String".8 between Tilbury and Blenheim.

Between Windsor and Tilbury, HighwayScript error: No such module "String".98 followed what was the original route of Highway 2, and later Highway 2A. After being assigned a unique route number in 1939, it was extended east to Blenheim in 1941. The purpose of HighwayScript error: No such module "String".98 within the provincial highway network was superseded by Highway 401, which was opened in sections between Windsor and London from 1957 to 1964. Consequently, it was transferred to Essex and Kent counties in 1970 and 1971.

Route description

HighwayScript error: No such module "String".98 travelled from Windsor to Blenheim via Maidstone, Tilbury, Merlin and Charing Cross.[1] The former route of HighwayScript error: No such module "String".98 is entirely urbanised to approximately Script error: No such module "convert". east of the HighwayScript error: No such module "String".401 interchange. East of that point, the highway is almost exclusively surrounded by flat farmland outside of the communities that dot its length.[2] Two conservation areas are located along the highway, both of which are maintained by the Essex Region Conservation Authority: Maidstone Conservation Area and Big O Conservation Area. It is known by various names, including Howard Avenue, Provincial Road, Middle Road and Middle Line; as well as by various designations: Essex County RoadScript error: No such module "String".46 and Chatham-Kent RoadScript error: No such module "String".8.[3]

Prior to 1966, the route began in downtown Windsor at the intersection of Ouellette Avenue and Riverside Drive. That intersection also served as the terminus for Highway 3B, Highway 18, and Highway 39; HighwayScript error: No such module "String".2 continued through the intersection to meet HighwayScript error: No such module "String".3 at the Detroit–Windsor tunnel. HighwayScript error: No such module "String".2, HighwayScript error: No such module "String".3B, HighwayScript error: No such module "String".39 and HighwayScript error: No such module "String".98 travelled southeast concurrently along Ouellette Avenue to Tecumseh Road, at which point HighwayScript error: No such module "String".3B branched west along that road while the others turned east. At Howard Avenue, HighwayScript error: No such module "String".39 continued east while HighwayScript error: No such module "String".2 and HighwayScript error: No such module "String".98 turned south. They then travelled concurrently to Cabana Road / Division Road, where HighwayScript error: No such module "String".2 split onto Division Road and HighwayScript error: No such module "String".98 onto Provincial Road.[3][1]

HighwayScript error: No such module "String".98 left Windsor as it encountered an interchange with HighwayScript error: No such module "String".401 (ExitScript error: No such module "String".14). It travelled southeast, parallel to and north of HighwayScript error: No such module "String".3, to Maidstone. There, the highway curved and became Middle Road. It followed this road east, travelling through the communities of Pleasant Park, North Woodslee and Ruscom Station before curving northeast and through Comber. It curved east briefly before turning back northeast and skirting the southern edge of Tilbury. At the intersection of Queen Street South and Wheatley Road it left Essex County and entered what is now the municipality of Chatham-Kent. Continuing east, now as Middle Line, the route encountered the communities of Valetta, Stewart and Merlin before curving northeast. It bisected South Buxton before encountering Charing Cross and turning east. It continued for a short distance into Blenheim, where it ended at HighwayScript error: No such module "String".3 (Talbot Street).[3][1]

History

File:Essex, Ontario Highways 1926.jpg
1926 highway map of Essex County, before the opening of the Ambassador Bridge

Predecessor

HighwayScript error: No such module "String".98 was first assigned in 1939 out of a route renumbering scheme.[4] However, the route it would follow was already maintained by the Department of Public Highway (DPHO), predecessor to the modern Ministry of Transportation of Ontario, as early as 1920. Although the rest of the route which later became HighwayScript error: No such module "String".2, from London to the Quebec boundary, was easily decided upon, the section west of London became a contentious local issue. Cities including Sarnia, St. Thomas, Leamington, Chatham, Tilbury, Windsor, and even London itself, as well as numerous road and business associations, lobbied the provincial government to take over certain roads that provided the greatest benefit to them. London and St. Thomas in particular insisted that "the Provincial Highway" follow the Longwood Road or the Talbot Road, respectively.[5] In the end, the province chose to utilise both the Longwood and Talbot roads, creating an entire network of highways in the process.[6] In April 1920, the DPHO assumed control of several roads connecting Windsor with London via Maidstone, Tilbury and Chatham as part of "the Provincial Highway".[7]

The Provincial Highway was assigned a number — HighwayScript error: No such module "String".2 — during the summer of 1925.[8] It travelled concurrently with the International Highway — HighwayScript error: No such module "String".3 — from the former ferry docks at Riverside Drive and Ouellette Avenue. It then followed Ouellette Avenue south to Tecumseh Road, where it jogged west and turned south onto Dougall Avenue, then onto Howard Avenue, and east along Talbot Road. At Maidstone, the concurrency ended, with HighwayScript error: No such module "String".2 branching northeast along Malden Road and east on Middle Road.[9] This arrangement remained in place until the opening of the Ambassador Bridge on NovemberScript error: No such module "String".15, 1929, which resulted in several modifications to the highway network within Essex County.[10]

Renumberings

In anticipation of the opening of the Ambassador Bridge, as well as the nearby Detroit–Windsor tunnel, Windsor and the surrounding townships sought road improvements between Windsor and Maidstone to alleviate traffic along Talbot Road and bypass or separate several level crossings of the Michigan Central Railway (MCR) beginning in early 1929.[11][12][13] The province chose to designate a new right-of-way adjacent to and north of the MCR in July of that year,[14] and spent the next several months constructing the cut-off (now known as Provincial Road) from Howard Avenue to north of Maidstone.[15] By 1930, HighwayScript error: No such module "String".2 had been rerouted to begin at the ferry docks, following Ouellette Avenue to Tecumseh Road, then east to and south along Howard Avenue; the short segment near Maidstone became HighwayScript error: No such module "String".2A.[16]

File:Ouellette Avenue 1951, Windsor, Ontario.png
Facing west towards downtown Windsor along Ouellette Avenue in 1951. The sign assembly at right features reassurance markers for HighwayScript error: No such module "String".2, HighwayScript error: No such module "String".3B, HighwayScript error: No such module "String".39, and HighwayScript error: No such module "String".98.

Meanwhile, the province set out to build a third highway into Windsor. Essex County had designated County RoadScript error: No such module "String".19 along Cabana Road (now Division Road) and Baseline Road to Tilbury on AprilScript error: No such module "String".19, 1928,[17] and soon thereafter the DPHO promised to take over the route as a new provincial highway.[18] HighwayScript error: No such module "String".18 was officially designated on JuneScript error: No such module "String".11, 1930 along the route,[19] while construction was already underway on a gentle curve between Provincial Road and the new highway, which was completed on JulyScript error: No such module "String".14, 1931.[20] Between then and early 1932, several more changes were made to the highway system. Since the route of HighwayScript error: No such module "String".18 was shorter than the route of HighwayScript error: No such module "String".2 between Windsor and Tilbury, the newly renamed Department of Highways (DHO) renumbered HighwayScript error: No such module "String".18 as HighwayScript error: No such module "String".2 in February 1932, while the old route of HighwayScript error: No such module "String".2 became HighwayScript error: No such module "String".2A.[21][22]

In 1939, the province instituted a change to its "numbering" policy in which lettered suffixes would only be used for short feeder routes and not for long distance routes. Consequently, HighwayScript error: No such module "String".2A became HighwayScript error: No such module "String".98 effective MarchScript error: No such module "String".18, 1939.[23] Taking inspiration from a program first carried out in Welland County in the summer of 1931 by the Rose Highway Association,[24][25] the Essex County Tourist Association and Essex County Automobile Club began providing rose bushes to property owners along the route at reduced costs, gaining HighwayScript error: No such module "String".98 the nickname "The Rose Trail".[26]

Extension, improvements and replacement

HighwayScript error: No such module "String".98 was extended east through Kent County to Blenheim along Kent County RoadScript error: No such module "String".8 on AprilScript error: No such module "String".30, 1941, increasing its length by Script error: No such module "convert"..[27] The short section of HighwayScript error: No such module "String".98 along Queen Street through Tilbury was redesignated as HighwayScript error: No such module "String".98B, but was never signed as such.[28] Initially, the new section of HighwayScript error: No such module "String".98 was paved through the village of Merlin as well as between Charing Cross and Blenheim, while the remainder was gravel-surfaced.[29] Paving operations resumed following World War II, with the section between Merlin and Charing Cross being paved in 1946.[30] The last remaining gravel section, between Tilbury and Merlin, was paved in 1950.[31]

File:Highway 401 at Highway 98 facing southwest towards Windsor.png
Aerial view of Highway 401 facing southwest in 1958. The interchange with HighwayScript error: No such module "String".98 is in the foreground, and the split at Dougall Parkway in the background.

Construction of HighwayScript error: No such module "String".401 in the Essex county began in the early 1950s, with the new "superhighway" opening in segments as it was completed. While the section from HighwayScript error: No such module "String".98 to west of Tilbury was opened on AugustScript error: No such module "String".15, 1957,[32] steel shortages would delay the completion of the entrances into Windsor until JuneScript error: No such module "String".9, 1958.[33][34] A bypass around Tilbury opened November 20, 1961.[35] East of Tilbury, the highway was opened one carriageway at a time; the westbound lanes opened to HighwayScript error: No such module "String".21 on SeptemberScript error: No such module "String".20, 1963,[36] while the eastbound lanes opened as far east as Bloomfield Road south of Chatham on SeptemberScript error: No such module "String".17, 1964,[37] and several months later to the Kent County boundary on DecemberScript error: No such module "String".7.[38]

Following the completion of HighwayScript error: No such module "String".401, the DHO commissioned the Southwestern Ontario Highway Planning Study, which was completed in July 1966. It examined traffic patterns and determined ideal travel lines and redundant routes. The new freeway had shifted the majority of long-distance traffic onto it, and severely reduced volume on parallel routes (Highways 2, 3, 39, 18, and 98). Accordingly, the DHO sought to divest itself of the costs of maintaining these roads.[39][40] The portion of HighwayScript error: No such module "String".98 east of Tilbury was transferred to Kent County on MayScript error: No such module "String".21, 1970, in exchange for the DHO assuming Highway 40 between Chatham and Blenheim.[41][42] The portion between Windsor and Tilbury was supposed to be transferred to Essex County on JuneScript error: No such module "String".1, 1970,[28] but was delayed until AprilScript error: No such module "String".1, 1971.[43] This removed HighwayScript error: No such module "String".98 from the provincial highway system entirely. The former highway has since been known as Essex County RoadScript error: No such module "String".46 west of Tilbury, and Kent County RoadScript error: No such module "String".8 or Chatham-Kent Municipal RoadScript error: No such module "String".8 east of Tilbury.[42][44]

Major intersections

Template:ONinttop Template:ONint Template:ONint Template:ONint Template:ONint Template:ONint Template:ONint Template:ONint Template:ONint Template:ONint Template:ONint Template:ONint Template:ONint Template:ONint Template:ONint Template:ONint Template:ONint Template:ONint Script error: No such module "Jctbtm".

See also

References

<templatestyles src="Reflist/styles.css" />

  1. a b c Script error: No such module "Citation/CS1".
  2. Template:Google maps
  3. a b c Script error: No such module "Citation/CS1".
  4. Script error: No such module "citation/CS1".
  5. Script error: No such module "citation/CS1".
  6. Script error: No such module "citation/CS1".
  7. Script error: No such module "citation/CS1".
  8. Script error: No such module "Citation/CS1".
  9. Script error: No such module "Citation/CS1".
  10. Script error: No such module "citation/CS1".
  11. Script error: No such module "citation/CS1".
  12. Script error: No such module "citation/CS1".
  13. Script error: No such module "citation/CS1".
  14. Script error: No such module "citation/CS1".
  15. Script error: No such module "citation/CS1".
  16. Script error: No such module "Citation/CS1".
  17. Script error: No such module "citation/CS1".
  18. Script error: No such module "citation/CS1".
  19. Script error: No such module "citation/CS1".
  20. Script error: No such module "citation/CS1".
  21. Script error: No such module "citation/CS1".
  22. Script error: No such module "citation/CS1".
  23. Cite error: Script error: No such module "Namespace detect".Script error: No such module "Namespace detect".
  24. Script error: No such module "citation/CS1".
  25. Script error: No such module "citation/CS1".
  26. Script error: No such module "citation/CS1".
  27. Script error: No such module "citation/CS1".
  28. a b Script error: No such module "citation/CS1".
  29. Script error: No such module "Citation/CS1".
  30. Script error: No such module "citation/CS1".
  31. Script error: No such module "citation/CS1".
  32. Script error: No such module "citation/CS1".
  33. Script error: No such module "citation/CS1".
  34. Script error: No such module "citation/CS1".
  35. Script error: No such module "citation/CS1".
  36. Script error: No such module "citation/CS1".
  37. Script error: No such module "citation/CS1".
  38. Script error: No such module "citation/CS1".
  39. Script error: No such module "citation/CS1".
  40. Script error: No such module "citation/CS1".
  41. Script error: No such module "citation/CS1".
  42. a b Script error: No such module "citation/CS1".
  43. Script error: No such module "citation/CS1".
  44. Script error: No such module "citation/CS1".

Script error: No such module "Check for unknown parameters".

External links

Template:Attached KML