NASA Standard Initiator
The NASA Standard Initiator (NSI) is a pyrotechnic device used to set off other pyrotechnic devices. It is the central multi-purpose component of a modular system of detonating cords, pyrotechnics and various other explosive charges with many different uses.[1]
The ignition charge of the device is a blend of zirconium, potassium perchlorate, Viton B and graphite, often abbreviated as ZPP.[2]
Uses of the device include:
- Setting off pressure cartridges, pocket sized gas generators which in turn pneumatically activate other systems.
- Setting off the NASA standard detonator, which itself activates other systems explosively.
- Triggering Pyrotechnic Circuit Interrupters, severing bundles of electrical cables.
- Triggering explosive valves to open/close pressurization lines or fuel lines.
- Triggering a pyrotechnic pin puller which opens a Marman clamp, separating two spacecraft.
- Acting as an igniter.
Development
The NASA Standard Initiator (NSI) was developed from the Single-Bridgewire Apollo Standard Initiator (SBASI) which was itself based on the Apollo Standard Initiator (ASI).[3]
To provide additional redundancy and thus make the spacecraft more reliable, a double-bridgewire design was utilized, but during development of the Apollo Standard Initiator it was found that the original design responded unfavorably to RF frequencies. This resulted in a redesign with a single bridgewire which was approved in 1966. This new design introduced several other changes to improve resistance and give the device a longer shelf life, such as switching the material of the body from 17-4 PH steel to Inconel 718.[4]
After the Apollo program ended, the Initiator was renamed and re-used on other spacecraft, such as the Space Shuttle.[3]
References
<templatestyles src="Reflist/styles.css" />
Script error: No such module "Check for unknown parameters".