London Underground infrastructure

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

Script error: No such module "Unsubst". Template:Use British English Template:Short description Template:Undergroundconnect The railway infrastructure of the London Underground includes 11 lines, with 272 stations. There are two types of line on the London Underground: services that run on the sub-surface network just below the surface using larger trains, and the deep-level tube lines, that are mostly self-contained and use smaller trains. Most of the lines emerge on the surface outside the Central London area.

The oldest trains currently in service on the Underground are 1972 Stock trains on the Bakerloo line. The Underground is electrified using a four-rail system, the DC traction supply being independent of the running rails. Planned improvements include new stations, line extensions and more lines with automatic train operation (ATO).

Railway

The total length of railway on the London Underground is Script error: No such module "convert". and made up of the sub-surface network and the deep-tube lines.[1] In 1971/72 it was re-measured in kilometres using Ongar as the zero point.[2][3]

Sub-surface network and deep-level tube linesScript error: No such module "anchor".

File:London Underground subsurface and tube trains.jpg
A sub-surface Metropolitan line A Stock train (left) passes a deep-tube Piccadilly line 1973 Stock train (right) in the siding at Rayners Lane.

The Circle, District, Hammersmith & City, and Metropolitan lines are services that run on the sub-surface network, that has railway tunnels just below the surface and was built mostly using the cut-and-cover method. The tunnels and trains are of a similar size to those on British main lines. The Hammersmith & City and Circle lines share all their stations and most of the track with other lines. The Bakerloo, Central, Jubilee, Northern, Piccadilly, Victoria and Waterloo & City lines are deep-level tube lines, with smaller trains running through two circular tunnels with a diameter of about Script error: No such module "convert"., lined with cast-iron or precast concrete rings, which were bored using a tunnelling shield. These were called the tube lines. Since the 1950s the term "tube" has come to be used to refer to the whole London Underground system.Template:Sfnp

Many of the central London deep-tube line stations, such as those on the Central and Piccadilly lines, are higher than the running lines to help with deceleration when arriving and acceleration when departing.Template:Sfnp The deep-tube lines generally have the exclusive use of a pair of tracks. An exception is the Piccadilly line, which shares track with the District line between Acton Town and North Ealing and with the Metropolitan line between Rayners Lane and Uxbridge. The Bakerloo line shares track with London Overground Lioness line between Queen's Park and Harrow & Wealdstone.[4]

There are Script error: No such module "convert". of cut-and-cover tunnel and Script error: No such module "convert". of tube tunnel, the other 55% of the system running above ground.[1] Trains generally run on the left-hand track, although in some places, for example the Central line east of St Paul's station, tunnels are dug one above each other.[4] The Victoria line has right-hand running between Warren Street and King's Cross St Pancras, allowing cross-platform interchange with the Northern line (Bank branch) between northbound and southbound trains at Euston.[4]Template:Sfnp

File:London Underground with Greater London map.svg
A geographical map of the London Underground, showing the proportional spread of the network over the city (except for Amersham and Chesham stations, which are not in the field of view in the top left)

Six of the 32 London boroughs are not served by the Underground. All of these are south of the River Thames: Bexley, Bromley, Croydon, Kingston, Lewisham and Sutton. The borough of Lewisham used to be served by the Underground on the East London line – now part of London Overground – at New Cross and New Cross Gate. Of the boroughs through which the Underground lines pass, Hackney is served solely by Manor House station on the Piccadilly line on the very north-western boundary of the borough. For the most part however, some of the tube lines like the Central line skirt around the perimeter of Hackney rather than going straight through it. The Royal Borough of Greenwich had no Underground station until North Greenwich station opened in 1999 on the Jubilee line extension.

Electrification

File:Amersham A Stock (1).jpg
The older Metropolitan line train A Stock bound for Amersham

The lines are electrified with a four-rail DC system. The configuration and potential of the conductor rails varies across the network. As of 2020, there are three different conductor rail configurations:

  • The original configuration is nominally 630 V with a −210 V centre conductor rail and a +420 V outside conductor rail. This is the default configuration wherever deep-level tube trains operate.[5]
  • Beginning in 2016, sections of the sub-surface network were reconfigured to a 750 V configuration (−250 V and +500 V rails). As of 2019, the entire sub-surface network uses this configuration except for Uxbridge to Finchley Road (via Harrow) as 1973 Stock and 1996 Stock (of the Piccadilly and Jubilee lines respectively) share the railway.[6]
  • In areas where Underground and third rail rolling stock share tracks, the centre conductor rail is electrically connected to the running rails. This still results in a 750 V voltage, but in a 0 V/+750 V configuration.[5] Lines configured in this manner include:

The four rail system was first used in the early 20th century. The isolated traction current return allowed a train's position to be detected using DC track circuits, and reduced any earth leakage currents that could affect service pipes, telephone cables, or cast iron tunnel liners.Template:Sfnp

The traction current has no direct earth point, but there are two resistors connected in series across the traction supply. The positive resistor is twice as great as the negative resistor, since the positive rail carries twice the voltage of the negative rail. The junction point of the resistors is earthed, establishing the reference point between the positive and negative rails by voltage division. The resistors are great enough to prevent large currents flowing through the earthed infrastructure.

Ventilation and cooling

Script error: No such module "Labelled list hatnote". The Metropolitan Railway's first line was built in the belief that it would be operated by smokeless locomotives and with little thought given to ventilation.Template:Sfnp Initially the smoke-filled stations and carriages did not deter passengers,Template:Sfnp the ventilation being later improved by making an opening in the tunnel between King's Cross and Gower Street and removing glazing in the station roofs,Template:Sfnp and the later extensions and the District Railway were built with stations in the open.Template:Sfnp With the problem on the original line continuing after the 1880s, conflict arose between the Met, who wished to make more openings in the tunnels, and the local authorities, who argued that these would frighten horses and reduce property values.Template:Sfnp This led to an 1897 Board of Trade report that reported a pharmacist was treating people in distress after having travelled on the railway with his 'Metropolitan Mixture'. The report recommended more openings be authorised but the underground sections of the Metropolitan and District railways were electrified before these were built.Template:Sfnp

Forced ventilation was not considered when the deep-tube Central London Railway opened in 1900, engineers considering that the movement of the electric trains would give sufficient air circulation. However, soon after opening there were complaints about a smell that the company couldn't explain, and by 1911 they had installed a system of fans injecting filtered air and ozone.Template:Sfnp Exhaust fans had been fitted at most stations when the Underground Electric Railways Company (UERL) opened its three tube lines in 1906–7,Template:Sfnp a maximum temperature of Script error: No such module "convert". in hot weather being advertised on the Bakerloo line.Template:Sfnp However, over time heat from the trains has warmed up the tube tunnels, and in 1938 approval was given to a £500,000 programme to improve the ventilation and an experimental refrigeration plant was installed in a lift shaft at Tottenham Court Road.Template:Sfnp More recently, temperatures of Script error: No such module "convert". were reported in the 2006 European heat wave.[7] It was reported in 2002 that, if animals were being transported, temperatures on the Tube would break European Commission animal welfare laws.[8] A 2003 study stated that air quality was seventy-three times worse than at street level, with twenty minutes on the Northern line having "the same effect as smoking a cigarette".[9]

The main purpose of the London Underground's ventilation fans is to extract hot air from the tunnels,Template:Sfnp a system on the Jubilee line extension being designed to allow cooling of the tubes at night. Fans over the network are being refurbished, although complaints of noise from local residents preclude their use at full power at night.[10] Following a successful demonstration of a heat pump in 2001, funds were given to the School of Engineering at London's London South Bank University to develop a prototype; work began in April 2002. A prize of £100,000 was offered by the Mayor of London during the hot summer of 2003 for a solution to the problem, but the competition ended in 2005 without a winner.[11] A year-long trial of a groundwater cooling system began in June 2006 at Victoria station.[12] The University's system comprised three fan coil units that use water that has seeped into the tunnels and is pumped from the tunnels to absorb the heat after which it is discharged in the sewer system. The scheme was one of the winners in the Carbon Trust's 2007 Innovation Awards.[13][14] In 2012 air cooling units were installed on platforms at Green Park station using cool deep ground water and at Oxford Circus using chiller units at the top of an adjacent building.[15] New air-conditioned trains have been introduced on the sub-surface lines, but was initially ruled out for the tube trains due to space being considered limited on the tube trains for air-conditioning units and that these would heat the tunnels even more. The New Tube for London, which will replace the existing fleet of the Piccadilly, Bakerloo, Central and Waterloo & City lines, is planned to have air-conditioning for the tube trains along with better energy conservation and regenerative braking.[16][17][18]

Stations

Script error: No such module "Labelled list hatnote". The Underground serves 272 stations.[19] Fourteen Underground stations are outside Greater London, of which five (Amersham, Chalfont & Latimer, Chesham, and Chorleywood on the Metropolitan line and Epping on the Central line) are beyond the M25 London orbital motorway.

File:Gb-lu-Angel-southbound.jpg
The southbound platform at Angel

The longest distance between two stations is Script error: No such module "convert". between Chalfont & Latimer and Chesham on the Metropolitan line.[1] The shortest distance between adjacent stations is the Script error: No such module "convert". between Leicester Square and Covent Garden on the Piccadilly line.[1] The station furthest south is Morden on the Northern line, Script error: No such module "convert". from Moorgate. The station furthest east is Upminster on the District line, Script error: No such module "convert". from Tower Hill.[1] Chesham on the Metropolitan line is both the northernmost and westernmost station on the network, Script error: No such module "convert". from Aldgate.[1] Hampstead is the deepest station below the surface, at Script error: No such module "convert"., as its surface building is near the top of a hill, and the Jubilee line platforms at Westminster are the deepest platforms below sea level at Script error: No such module "convert".. The highest station is Amersham on the Metropolitan line, at Script error: No such module "convert". above sea level and the highest point above ground is the Dollis Brook Viaduct over Dollis Road between Finchley Central and Mill Hill East on the Northern line, Script error: No such module "convert". above the ground.[1]

Lifts and escalators

Script error: No such module "Labelled list hatnote".

File:Brightest London is best reached by Underground, subway poster, 1924.jpg
1924 Underground advertising poster

When the City & South London Railway opened in 1890Template:Sfnp access to the platforms was by two hydraulic lifts, each capable of carrying 50 passengers.Template:Sfnp The later extensions had electric lifts and five were provided at Bank.Template:Sfnp Access to the Waterloo & City Railway in 1898 was by slopes and steps,Template:Sfnp and the Great Northern & City Railway (GN&CR) used both hydraulic and electric lifts. The Central London Railway provided electric lifts when it opened in 1900, and the opening of Bond Street station was delayed as the lifts were not ready.Template:Sfnp The UERL controversially imported 140 electric lifts from Otis Elevator Company in the U.S. for its three lines. Each carrying about 70 passengers, they were provided at every station except Gillespie Road (now Arsenal) and Embankment, where access was provided via the District's station.Template:Sfnp Hydraulic lifts were provided at Finsbury Park, powered from the GN&CR pumping station,Template:Sfnp and at Holloway Road there was an experimental spiral conveyor, but this was never used by the public.Template:Sfnp Each lift was manned, and at some quiet stations in the 1920s, the ticket office was moved into the lift, or it was arranged that the lift could be controlled from the ticket office.Template:Sfnp

The first escalator on the London Underground was at Earl's Court in 1911, between the District and Piccadilly platforms. It was advertised by signs and a porter shouting "This way to the moving staircaseTemplate:Spaced ndashthe only one in LondonTemplate:Spaced ndashnow running." From 1912, all new deep-level stations were provided with escalators instead of lifts.Template:Sfnp The Otis Seeberger design of escalator, with a diagonal shunt at the top landing requiring a sideways step off, was used until 1924, when the first 'comb' type was installed at Clapham Common.Template:SfnpTemplate:Sfnp In 1921, a recorded voice instructed passengers to stand on the right and signs followed in World War II.Template:Sfnp It is thought that people were standing on the right as the diagonal shunts at the top of the escalators made it easier to step off with the right foot.[20] In the 1920s and 30s many lifts were replaced by escalators.Template:Sfnp Before World War II, an escalator installed at Sloane Square was the first connecting Circle line platforms to the street, but it was destroyed when the station was hit by a bomb in 1940. Due to wartime conditions, no escalators were provided when Highgate station on the Northern line extension opened in 1941; these were finally installed in 1957.Template:Sfnp

On 18 November 1987, the King's Cross fire at King's Cross St Pancras tube station killed 31 people. The subsequent public inquiry determined that the fire had started due to a lit match being dropped onto the escalator and suddenly increased in intensity due to a previously unknown trench effect. This was followed by the Fire Precautions (Sub-Surface Railway Stations) Regulations 1989 which required all wooden escalators on the Underground to be replaced with metal ones. From 1989, the wooden panelling on escalators was gradually replaced, and by January 1990, all wooden escalators in underground stations had been replaced.Template:Sfnp Treads were originally maple wood, then aluminium from 1963, and this had been replaced with plastic or rubber following an increase in serious injuries following falls. However, following the King's Cross fire, aluminium treads have been used on all escalators.Template:Sfnp

As of 2019, there were 451 escalators on the London Underground system with the longest, at Script error: No such module "convert"., at Angel.[21] The shortest, at Stratford, gives a vertical rise of Script error: No such module "convert".. There are 202 lifts across the Underground,[22] with 92 stations having step-free access from street to train.[23] Major efforts have taken place to improve accessibility across the Underground, with the Jubilee line extension having lifts from opening in 1999, and key interchange stations such as King's Cross St Pancras, Victoria and Green Park becoming step-free. Over 28 stations will become step-free over the next 10 years, taking the total step-free stations to over 100.[24] In October 2015, TfL installed the first incline lift on the UK transport network, at Greenford station.[25]

Lines

The London Underground comprises eleven lines.

London Underground lines
Name Map
colour[26]
First
operated
First
section
opened*
Name
dates
from
Type
♯
Length
(km)
Length
(miles)
No.
Sta
Current
Stock
Future
Stock
Trips per annum
in thousands[27]
Avg. trips per mile
(per kilometre)
in thousands
Bakerloo line style="background:#Template:Rcr; color:white;"|Light Brown 1906 1906 1906 DT 23.2 14.5 25 1972 Stock NTfL 111,136 Template:Hs7,665
(4,763)
Central line style="background:#Template:Rcr; color:white;" | Red 1900 1856 1900 DT 74 46 49 1992 Stock NTfL 260,916 Template:Hs5,672
(3,524)
Circle line+ style="background:#Template:Rcr;"|Yellow 1884 1863 1949 SS 27.2 17 36 S Stock N/A 114,609 Template:Hs4,716
(2,930)
District line style="background:#Template:Rcr; color:white;"|Green 1868 1858 1868 SS 64 40 60 S Stock N/A 208,317 Template:Hs5,208
(3,236)
Hammersmith & City line+ style="background:#Template:Rcr;"|Pink 1988~ 1858 1988 SS 25.5 15.9 29 S Stock N/A 114,609 Template:Hs4,716
(2,930)
Jubilee line style="background:#Template:Rcr; color:white;"|Silver 1979 1879 1979 DT 36.2 22.5 27 1996 Stock N/A 213,554 Template:Hs9,491
(5,897)
Metropolitan line style="background:#Template:Rcr; color:white;"|Dark Magenta 1863 1863 1863 SS 66.7 41.5 34 S Stock N/A 66,779 Template:Hs1,609
(1,000)
Northern line style="background:#Template:Rcr; color:white;"|Black 1890 1867 1937 DT 58 36 52 1995 Stock N/A 252,310 Template:Hs7,009
(4,355)
Piccadilly line style="background:#Template:Rcr; color:white;"|Dark Blue 1906 1869 1906 DT 71 44.3 53 1973 Stock NTfL 210,169 Template:Hs4,744
(2,948)
Victoria line style="background:#Template:Rcr; color:white;"|Light Blue 1968 1968 1968 DT 21 13.25 16 2009 Stock N/A 199,988 Template:Hs15,093
(9,378)
Waterloo & City line style="background:#Template:Rcr; color:black;"|Turquoise 1898† 1898 1898 DT 2.5 1.5 2 1992 Stock NTfL 15,892 Template:Hs10,595
(6,583)
Template:Smalldiv

Rolling stock

File:Why London Underground is nicknamed The Tube.jpg
A Northern line deep-tube train leaves a tunnel mouth just north of Hendon Central station.

Script error: No such module "Labelled list hatnote". Script error: No such module "Unsubst". London Underground trains come in two sizes, larger sub-surface trains and smaller deep-tube trains.[28] Since the early 1960s, all passenger trains have been electric multiple units with sliding doorsTemplate:Sfnp and a train last ran with a guard in 2000.Template:Sfnp All of the lines use fixed length trains with between six and eight cars, except for the Waterloo & City line, which uses four-car trains.[29] New trains are designed for maximum number of standing passengers and for speed of access to the cars and have regenerative braking and public address systems.[17] Since 1999, all new stock has had to comply with accessibility regulations that require such things as access and room for wheelchairs, and the size and location of door controls. All underground trains are required to comply with the Rail Vehicle Accessibility (Non Interoperable Rail System) Regulations 2010 (RVAR 2010) by 2020.[30]

Stock on sub-surface lines is identified by a letter (such as S Stock, used on all sub-surface lines), while tube stock is identified by the year of intended introductionTemplate:Sfnp (for example, 1996 Stock, used on the Jubilee line).

Planned improvements

Line extensions

The Croxley Rail Link would involve rerouting the Metropolitan line's Watford branch from its current terminus at Watford station over the disused Croxley Green branch line to Watford Junction. Funding was agreed in December 2011.[31] Construction work was due start in June 2014.[32] However, in 2017 it was announced that further work was being postponed because of funding disputes.[33]

There are suggestions that the Bakerloo line be extended to Lewisham, and then taking over services on the Hayes Line to relieve capacity on the suburban rail network.[34] The London Borough of Hillingdon has proposed that the Central line be extended from West Ruislip to Uxbridge via Ickenham, claiming the extension would cut traffic on the A40 in the area.[35]

Line upgrades

The signalling system on the Northern line was replaced allowing a capacity increase of 20 per cent by the end of 2014.[36] Capacity can be increased further if the operation of the Charing Cross and Bank branches are separated.[37] New S Stock trains have been introduced on the sub-surface (District, Metropolitan, Hammersmith & City and Circle) lines, and the track, electrical supply and signalling systems are being upgraded as part of the Four Lines Modernisation to increase peak-hour capacity.[18][36] A single control room for the sub-surface network is to be established in Hammersmith and an automatic train control (ATC) system will replace signalling equipment installed from the 1940s.[18][38]

Options for new trains for the Bakerloo and Piccadilly lines are being considered. The New Tube for London trains will replace the 1972 Stock and the 1973 Stock of the Bakerloo line and the Piccadilly line respectively.[36]

References

Footnotes

<templatestyles src="Reflist/styles.css" />

  1. ↑ a b c d e f g Script error: No such module "citation/CS1".
  2. ↑ Script error: No such module "citation/CS1".
  3. ↑ Script error: No such module "citation/CS1".
  4. ↑ a b c Script error: No such module "citation/CS1".
  5. ↑ a b Script error: No such module "citation/CS1".
  6. ↑ Script error: No such module "citation/CS1".
  7. ↑ Script error: No such module "citation/CS1".
  8. ↑ Script error: No such module "citation/CS1".
  9. ↑ Script error: No such module "citation/CS1".
  10. ↑ Script error: No such module "citation/CS1".
  11. ↑ Script error: No such module "citation/CS1".
  12. ↑ Script error: No such module "citation/CS1".
  13. ↑ Script error: No such module "citation/CS1".
  14. ↑ Script error: No such module "citation/CS1".
  15. ↑ Script error: No such module "citation/CS1".
  16. ↑ Script error: No such module "citation/CS1".
  17. ↑ a b Script error: No such module "Citation/CS1".
  18. ↑ a b c Script error: No such module "Citation/CS1".
  19. ↑ Script error: No such module "citation/CS1".
  20. ↑ Script error: No such module "citation/CS1". Registration required.
  21. ↑ Script error: No such module "citation/CS1".
  22. ↑ Script error: No such module "citation/CS1".
  23. ↑ Script error: No such module "citation/CS1".
  24. ↑ Script error: No such module "citation/CS1".
  25. ↑ Script error: No such module "citation/CS1".
  26. ↑ Script error: No such module "citation/CS1".
  27. ↑ Script error: No such module "citation/CS1".
  28. ↑ Script error: No such module "citation/CS1".
  29. ↑ Script error: No such module "citation/CS1".
  30. ↑ Script error: No such module "citation/CS1".
  31. ↑ Script error: No such module "citation/CS1".
  32. ↑ Script error: No such module "citation/CS1".
  33. ↑ Script error: No such module "citation/CS1".
  34. ↑ Script error: No such module "citation/CS1".
  35. ↑ Script error: No such module "citation/CS1".
  36. ↑ a b c Script error: No such module "citation/CS1".
  37. ↑ Script error: No such module "citation/CS1".
  38. ↑ Script error: No such module "Citation/CS1".

Script error: No such module "Check for unknown parameters".

Bibliography

<templatestyles src="Refbegin/styles.css" />

  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1".