Liverpool and Bury Railway

The Liverpool and Bury Railway was formed by an act of Parliament in 1845 to link Liverpool and Bury via Kirkby, Wigan and Bolton, the line opening on 20 November 1848. The line became the Lancashire and Yorkshire Railway's main line between Liverpool, Manchester and Yorkshire. Most of it is still open.

Formation and opening

Template:Short descriptionTemplate:Template other In the 1840s travel by rail between Liverpool, Bolton and Wigan was possible but time consuming, and it depended on using the Liverpool and Manchester Railway (L&MR) who effectively had a monopoly on travel not only between Liverpool and Manchester but also to these industrial towns of the north west, Wigan via a connection on the North Union Railway, Bolton via a connection on the former Bolton and Leigh Railway (B&LR).Template:EfnTemplate:Sfn Local industrialists formed the Bolton, Wigan and Liverpool Railway Company in 1844 with the intention of breaking the L&MR monopoly, in 1845 they decided to include Bury in their plans and applied for parliamentary powers, these were granted in the Liverpool and Bury Railway Act 1845 (8 & 9 Vict. c. clxvi) on 31 July 1845 and the Liverpool and Bury Railway was formed.Template:RefnTemplate:SfnTemplate:Sfn

The Act provided for a line starting near the Borough gaol in Liverpool to a junction with the Bolton and Preston Railway (B&PR) near Lostock.Template:EfnTemplate:Sfn

Two branches were included in the act, one from near Upholland to Ormskirk, which was not constructed, and a branch from the Manchester and Bolton Railway at Bolton to a junction with the Manchester, Bury and Rossendale Railway at Bury.Template:EfnTemplate:Sfn

This second branch to Bury was already authorised to be extended onto Heywood where it connected with the Manchester and Leeds Railway (M&LR) forming a route through to Rochdale by the Manchester and Leeds Railway Act (No. 2) 1845 (8 & 9 Vict. c. liv) of 30 June 1845.Template:RefnTemplate:Sfn

Template:Short descriptionTemplate:Template other The Liverpool and Bury Railway was acquired under the terms of the Manchester and Leeds Railway (No. 2) Act 1846 (9 & 10 Vict. c. cclxxxii) on 27 July 1846 by the Manchester and Leeds RailwayTemplate:Refn who needed no persuasion in acquiring a route to Liverpool. At the same time as the amalgamation act was passed, the railway also had authorised by the Liverpool and Bury Railway Act 1846 (9 & 10 Vict. c. cccxii) to construct an extension into Liverpool to a station near Exchange Square, the extension was not allowed to pass within of the borough gaol and a wall was to be erected to prevent railway passengers seeing into the gaol.Template:RefnTemplate:Sfn

In August 1846 the Liverpool, Ormskirk and Preston Railway (LO&PR) secured an act of Parliament, the Liverpool, Ormskirk, and Preston Railway Act 1846 (9 & 10 Vict. c. ccclxxxi), for a line between those towns which included the making of the line joint with the L&BR from Walton Junction to the Liverpool terminus, the terminal station itself and the proposed extension to the new terminus at Tithebarn Street. The act also included a branch from near Kirkdale to Liverpool docks. The LO&PR was required to pay the L&BR half of the cost for this joint venture. The act also allowed for the LO&PR to be leased or sold to the East Lancashire Railway (ELR) and this happened in October 1846.Template:RefnTemplate:Sfn

The Manchester and Leeds Railway amalgamated with others to become the Lancashire and Yorkshire Railway on 9 July 1847, under the Lancashire and Yorkshire Railway Act 1847 (10 & 11 Vict. c. clxiii).Template:RefnTemplate:Sfn

The line running from a temporary terminus at Template:Rws to the junction near Lostock, and the branch from Bolton to Bury were opened by the Lancashire and Yorkshire Railway on 20 November 1848, the section between Lostock and Bolton had been open since the 1841 opening of the Bolton and Preston Railway, it was double-tracked throughout. The line opened for goods traffic a month later than passengers whilst a wagon hoist was installed at Liverpool.Template:SfnTemplate:Sfn

The final section of the continuing route from Template:Rws to Template:Rws had been opened by the L&YR on 1 May 1848.Template:Sfn

Construction

A contract for building the whole line, less the viaduct required at Liverpool, was let on 5 November 1845 to William McCormick and William Dargan, the Liverpool viaduct contract was not let until 11 March 1846 and that went to William McCormick in conjunction with S. & J. Holmes, the line was to be complete by 1 July 1847 with penalties for lateness and bonuses for early completion. Work started at once and along the whole line and by May 1846 there were about 3,500 men and 200 horses at work.Template:Sfn

There were some considerable civil engineering aspects to the line, the Liverpool viaduct was over a , had 117 brick arches high and contained over 26 million bricks. On 23 March 1847 twenty-one of the arches collapsed, setting back the work and adding expense.Template:Sfn Walton tunnel whilst long presented no problems as it was dry. Upholland tunnel at went through coal measures and rock and proved to be very wet and troublesome requiring pumping.Template:Sfn

At Rainford the line went for over a moss (similar to Chat moss which the Liverpool and Manchester Railway had to cross) which had to be excavated to a depth of . There was a long and high embankment at Pemberton, long bridges were needed to cross the Leeds and Liverpool Canal, at Kirkdale and again near Wigan, Wigan was approached via a timber viaduct consisting of forty-five spans and the NUR's Springs branch also needed a timber viaduct high to cross it. Further along the line a long viaduct crossed the river Croal and the Manchester, Bolton & Bury Canal, the Tonge valley was crossed by an high viaduct and at Bury there was a stone viaduct of five spans of each.Template:Sfn

Description

From the joint L&YR/ELR station at Template:Rws Template:Efn the joint line ran northwards through Template:Rws (later became Kirkdale) to Walton Junction where the ELR line to Ormskirk and Preston which was under construction branched off, the line to Bury veering eastwards, immediately after the junction was Template:Rws (which later became Rice Lane) then Template:Rws (which later became Aintree then Fazakerley) to Template:Rws. Template:Rws was next followed by Template:Rws (later became Upholland) and Template:Rws which only lasted a short time until 1852 before being replaced by Template:Rws just over further along the line, then came Template:Rws and into the first Template:Rws station.Template:SfnTemplate:Sfn

The through Wigan were built in conjunction with the Manchester and Southport Railway as they would both be using it. There were two stations on this section, Template:Rws and Template:Rws.Template:SfnTemplate:Sfn

Shortly after Hindley the line veered northwards at what would later become Crow Nest Junction when the Manchester and Southport Railway finished its line to Manchester in 1888.Template:Sfn Template:Rws came next followed by a short-lived Template:Rws and then to Template:Rws where the line met the existing North Union Railway (former Bolton and Preston Railway) line into Bolton Trinity Street.Template:Sfn

Template:Rws was the first station after Bolton, then Template:Rws, Template:Rws and Template:Rws. At Bury the line made an end-on connection with the extension from Template:Rws that had opened on 1 May 1848.Template:Sfn

Stations that opened later were Template:Rws in 1854 and Template:Rws on 1 June 1863. Template:Sfn

Extension into Liverpool

When the line opened northwards from Template:Rws terminus it was already known that this station would only be temporary as the Liverpool and Bury Railway Act 1846 (9 & 10 Vict. c. cccxii) authorising the extension of the railway further into Liverpool had already been given royal assent.Template:RefnTemplate:Sfn

Just to the south of the original joint terminus the London and North Western Railway (L&NWR) had built a branch at a lower level into Template:Rws station, the extension had to cross these lines and did so via a bridge described as a huge brick arch in span and wedge-shaped in plan wide at the north end and wide at the south end, on a level with the passenger station and about above the L&NWR lines, this was designed by John Hawkshaw, the chief engineer of the L&YR.Template:SfnTemplate:Sfn

From the south end of the great brick arch the line curved eastwards around the wall of the borough gaol, crossed the Leeds and Liverpool Canal and then rose to the new terminus where the tracks were above Tithebarn Street, the height being necessary to keep open the canal and several streets passing beneath.Template:Sfn

The two-storied station building faced onto Tithebarn Street and rose to above street level with separate facilities for the two companies, the L&YR occupying the west side. The station had one arrival platform shared by the occupants who had two departure platforms each, the station opened on 13 May 1850.Template:Sfn

The approaches to the station were improved in the 1880s by the building of a loop line over a diverted Leeds and Liverpool canal, the station itself was completely rebuilt and enlarged to ten platforms, fully re-opening on 2 July 1888.Template:Sfn

North Docks branch

The Liverpool, Ormskirk, and Preston Railway Act 1846 (9 & 10 Vict. c. ccclxxxi) enabled building of a branch from near Kirkdale to Liverpool docks.Template:Refn The Manchester and Leeds Railway (No. 2) Act 1847 (10 & 11 Vict. c. ciii) allowed for the goods branch to become jointly owned, for a price, and this took place in 1848 between the L&YR (successors to the M&LR) and the ELR (successors to the LO&PR).Template:RefnTemplate:Sfn

Plans were drawn up and approved by both companies for the branch but no progress was made before the powers expired in 1853.Template:Sfn In 1854 the L&YR applied for the same powers, plus some additional branches into other docks. These were granted in the Lancashire and Yorkshire Railway (Liverpool Dock Branches) Act 1854 (17 & 18 Vict. c. lviii), and this time the ELR was allowed to become joint owners, again having to pay for half of the cost, the ELR declined, was reimbursed some of its earlier expenditure and the L&YR proceeded alone. The branch opened on 26 March 1855.Template:RefnTemplate:Sfn

From the junction, just north of Template:Rws station (which later became Sandhills) the line descended on a long brick viaduct with iron spans over the streets and a plate-girder bridge over Great Howard Street. From here the line split with the left-hand branch continuing to descend to ground level and into North Docks Goods station where there were connections onto the Mersey Docks and Harbour Board (MDHB) rail network. The other branch ran via a vertical-lift bridge over Regent Road to two High-level coal branches in Bramley Moore and Wellington docks, maintaining the higher level of the line enabled coal to be delivered directly into ships using shutes.Template:Sfn

The goods station dealt with a significant amount of imported Irish livestock, around 250 wagonloads a day for over 50 years until an outbreak of foot and mouth disease caused livestock to be diverted to Birkenhead and quarantined.Template:Sfn

North Mersey branch

The L&YR built this 4½ mile (7.2 Km) long double-track line to capture some of the increasing freight passing through the Canada Dock system in the north of the Mersey docks, opened in 1859. The line opened on 27 August 1866.Template:Sfn

The line initially had no stations, terminating in the North Mersey goods yard where an end-on connection was made to the Mersey Docks and Harbour Board (MDHB) rail network. Template:Rws opened in 1866, a four-storey warehouse, loading mound and goods sheds was constructed between 1881 and 1884, the station was renamed to Template:Rws in 1892.Template:SfnTemplate:Sfn

Electrification

The L&YR introduced multiple-unit third-rail electric powered trains from Exchange station to Template:Rws from March 1904, with a full service from 13 May 1904.Template:Efn This meant the section from Exchange to Sandhills was electrified then. The electrification was subsequently extended to Template:Rws in 1913 meaning the electrification now extended to Walton Junction.Template:Sfn

As part of the electrification work for the creation of Merseyrail, the line to Template:Rws was electrified, as diesel multiple units were banned from operating in the new tunnels for safety reasons. In order to maintain a through service to the city, the section from Walton Junction to Kirkby was third-rail electrified, with the remainder of the line towards Template:Rws and Template:Rws remaining diesel operated. The station at Kirkby became the interchange point between the two, as electrification eastwards from Kirkby was deemed too expensive at the time. Electric operations commenced on 2 May of that year, along with the end of through running between Bolton/Wigan and Liverpool.Template:Sfn

The interchange station changed in October 2023 when a new station at Template:Rws opened, this station is served on the Merseyrail side by a new fleet of battery operated trains.

Other improvements

The lines from Walton junction into Liverpool were doubled which needed two new tunnels at Kirkdale, all four tracks being brought into use on 24 April 1904.Template:Sfn

A new loop-line was constructed at Template:Rws it was completed by 1889.Template:Sfn

The L&YR widened the line to four-tracks through Template:Rws and from there opened a new loop line to Pemberton avoiding Wigan, the line opened for freight traffic on 1 May 1889 and to passenger traffic on 1 June 1889.Template:Sfn

The bridge over the Leeds and Liverpool Canal just north of Template:Rws was widened in 1911 and a large mineral depot opened at Redfern Street, between the canal and the line to Template:Rws on the canal's north bank.Template:Sfn

In 1946 one of the Victorian timber bridges on the line was replaced with the Adam Viaduct, the first prestressed concrete railway bridge in the United Kingdom.

The line today

With the exception of the section from Bolton to Bury (closed on 5 October 1970, along with the continuation through to Template:Rws) and the closure of Template:Rws in 1977 the line is still in use. The Liverpool end of the line now runs as part of Merseyrail's Link TunnelTemplate:Broken anchor. with Template:Rws having replaced Exchange station.

Long-term aspirations are to extend Merseyrail to Wigan on this line.

The Wigan to Bolton section meanwhile is used by Template:Rws to Southport and Southport to Template:Rws local services.

In January 2019, Campaign for Better Transport released a report identifying the line between Bolton and Bury which was listed as Priority 2 for reopening. Priority 2 is for those lines which require further development or a change in circumstances (such as housing developments).

In March 2020, a bid was made to the Restoring Your Railway fund to get funds for a feasibility study into reinstating the line between Bolton and Bury. This bid was unsuccessful however a resubmitted bid for the second round was successful.

Bibliography

• Template:Clinker-Stations
• Template:Grant-RailCo
• Template:Lancashire & Yorkshire Railway 1
• Template:Lancashire & Yorkshire Railway 2
• Template:Quick-stations-5.05