Lithium superoxide

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

<templatestyles src="Chembox/styles.css"/>

Template:Chembox headerbarTemplate:Chembox IndexlistTemplate:Chembox JmolTemplate:Chembox ChEMBLTemplate:Chembox ECHATemplate:Chembox E numberTemplate:Chembox IUPHAR ligandTemplate:Chembox UNIITemplate:Chembox CompToxTemplate:Chembox headerbarTemplate:Chembox headerbarTemplate:Chembox Datapage checkTemplate:Chembox Footer
Lithium superoxide
Template:Longitem Template:Unbulleted list
ChEBI Template:Unbulleted list
ChemSpider Template:Unbulleted list
DrugBank Template:Unbulleted list
EC Number Template:Unbulleted list
KEGG Template:Unbulleted list
Template:Longitem Template:Unbulleted list
RTECS number Template:Unbulleted list
Script error: No such module "collapsible list".
Script error: No such module "collapsible list".
Template:Longitem Template:Chembox Elements/molecular formula
Molar mass Template:Chem molar mass
Density g/cm3, solidTemplate:Cln
Melting point Template:Chembox CalcTemperatures
Template:Longitem Template:Ubl
Template:Longitem Template:Ubl

Template:Chembox Footer/trackingScript error: No such module "TemplatePar".Template:Short description

Lithium superoxide is an unstable inorganic salt with formula Template:Chem2. A radical compound, it can be produced at low temperature in matrix isolation experiments, or in certain nonpolar, non-protic solvents. Lithium superoxide is also a transient species during the reduction of oxygen in a lithium–air galvanic cell, and serves as a main constraint on possible solvents for such a battery. For this reason, it has been investigated thoroughly using a variety of methods, both theoretical and spectroscopic.

Structure

The Template:Chem2 molecule is a misnomer: the bonds between lithium and oxygen are highly ionic, with almost complete electron-transfer.[1] The force constant between the two oxygen atoms matches the constants measured for the superoxide anion (Template:Chem2) in other contexts. The bond length for the O-O bond was determined to be 1.34 Å. Using a simple crystal structure optimization, the Li-O bond was calculated to be approximately 2.10 Å.[2]

There have been quite a few studies regarding the clusters formed by Template:Chem2 molecules. The most common dimer has been found to be the cage isomer. Second to it is the singlet bypyramidal structure. Studies have also been done on the chair complex and the planar ring, but these two are less favorable, though not necessarily impossible.[3]

Production and reactions

Lithium superoxide is extremely reactive because of the odd number of electrons present in the π* molecular orbital of the superoxide anion.[4] Matrix isolation techniques can produce pure samples of the compound, but they are only stable at 15-40 K.[3]

At higher (but still cryogenic) temperatures, lithium superoxide can be produced by ozonating lithium peroxide (Template:Chem2) in freon 12:

Template:Chem2

The resulting product is only stable up to −35 °C.[5]

Alternatively, lithium electride dissolved in anhydrous ammonia will reduce oxygen gas to yield the same product:

Template:Chem2

Lithium superoxide is, however, only metastable in ammonia, gradually oxidizing the solvent to water and nitrogen gas:

Template:Chem2

Unlike other known decompositions of Template:Chem2, this reaction bypasses lithium peroxide.[6]

Occurrence

Like other superoxides, lithium superoxide is the product of a one-electron reduction of an oxygen molecule. It thus appears whenever oxygen is mixed with single-electron redox catalysts, such as p-benzoquinone.[7]

In batteries

Lithium superoxide also appears at the cathode of a lithium-air galvanic cell during discharge, as in the following reaction:[8]

Template:Chem2

This product typically then reacts and proceed to form lithium peroxide, Template:Chem2

Template:Chem2

The mechanism for this last reaction has not been confirmed and developing a complete theory of the oxygen reduction process remains a theoretical challenge as of 2022Script error: No such module "Check for unknown parameters"..[9] Indeed, recent work suggests that Template:Chem2 can be stabilized via a suitable cathode made of graphene with iridium nanoparticles.[10]

A significant challenge when investigating these batteries is finding an ideal solvent in which to perform these reactions; current candidates are ether- and amide-based, but these compounds readily react with the superoxide and decompose.[9] Nevertheless, lithium-air cells remain the focus of intense research, because of their large energy density—comparable to the internal combustion engine.[8]

In the atmosphere

Lithium superoxide can also form for extended periods of time in low-density, high-energy environments, such as the upper atmosphere. The mesosphere contains a persistent layer of alkali metal cations ablated from meteors. For sodium and potassium, many of the ions bond to form particles of the corresponding superoxide. It is currently unclear whether lithium should react analogously.[11]

See also

References

  1. Script error: No such module "Citation/CS1".
  2. Script error: No such module "Citation/CS1".
  3. a b Script error: No such module "Citation/CS1".
  4. Script error: No such module "Citation/CS1".
  5. Script error: No such module "Citation/CS1".
  6. Script error: No such module "Citation/CS1".
  7. Script error: No such module "Citation/CS1".
  8. a b Script error: No such module "Citation/CS1".
  9. a b Script error: No such module "Citation/CS1".
  10. Script error: No such module "Citation/CS1".
  11. For arguments claiming (or assuming) similarity, see:
    • Script error: No such module "Citation/CS1".
    • Script error: No such module "Citation/CS1".
    For an argument that the different photoionization rate of lithium should produce a dissimilar equilibrium, see:
    • Script error: No such module "Citation/CS1".

Script error: No such module "Navbox".