Lead styphnate

Template:Chembox image cellTemplate:Chembox AllOtherNamesTemplate:Chembox headerbarTemplate:Chembox IndexlistTemplate:Chembox JmolTemplate:Chembox ChEMBLTemplate:Chembox ECHATemplate:Chembox E numberTemplate:Chembox IUPHAR ligandTemplate:Chembox UNIITemplate:Chembox CompToxTemplate:Chembox headerbarTemplate:Chembox headerbarTemplate:Chembox headerbarTemplate:Chembox GHS (set)Template:Chembox SDSTemplate:Chembox Datapage checkTemplate:Chembox Footer

Lead styphnate

Template:Longitem	Template:Unbulleted list
ChEBI	Template:Unbulleted list
ChemSpider	Template:Unbulleted list
DrugBank	Template:Unbulleted list
EC Number	Template:Unbulleted list
KEGG	Template:Unbulleted list
Template:Longitem	Template:Unbulleted list
RTECS number	Template:Unbulleted list
UN number	0130
Template:Longitem	C6HN3O8Pb
Molar mass	450.288 g/mol
Density	3.06 to 3.1 g cm−3
Shock sensitivity	High
Friction sensitivity	High
Detonation velocity	5200 m/s
NFPA 704 (fire diamond)	Template:NFPA 704 diamond
Template:Longitem	Template:Chembox CalcTemperatures

Lead styphnate (lead 2,4,6-trinitroresorcinate, C₆HN₃O₈Pb), whose name is derived from styphnic acid, is an explosive used as a component in primer and detonator mixtures for less sensitive secondary explosives. Lead styphnate is only slightly soluble in water and methanol. Samples of lead styphnate vary in color from yellow to gold, orange, reddish-brown, to brown. Lead styphnate is known in various polymorphs, hydrates, and basic salts. Normal lead styphnate monohydrate, monobasic lead styphnate, tribasic lead styphnate dihydrate, and pentabasic lead styphnate dehydrate as well as α, β polymorphs of lead styphnate exist.

Lead styphnate forms six-sided crystals of the monohydrate and small rectangular crystals. Lead styphnate is particularly sensitive to fire and the discharge of static electricity. Long thin crystals are particularly sensitive. Lead styphnate does not react with other metals and is less sensitive to shock and friction than mercury fulminate or lead azide. It is stable in storage, even at elevated temperatures. As with other lead-containing compounds, lead styphnate is toxic owing to heavy metal poisoning.

Preparation

Lead styphnate (or, as it was then called, trinitro-orcinate) was discovered along with many other trinitroresorcinate salts by British chemist John Stenhouse in 1871, the synthesis route involving action of trinitroresorcinol on lead acetate.

In 1919, Austrian chemist Edmund von Herz first established a preparation of anhydrous normal lead styphnate by the reaction of magnesium styphnate with lead acetate in the presence of nitric acid.

{C₆N₃O₈}MgH₂O + Pb(CH₃CO₂)₂ → {C₆N₃O₈}PbH₂O + Mg(CH₃CO₂)₂

Structure

Normal lead styphnate exists as α and β polymorphs, both being monoclinic crystals. The lead centres are seven-coordinate and are bridged via oxygen bridges. The water molecule is coordinated to the metal and is also hydrogen-bonded to the anion. Many of the Pb-O distances are short, indicating some degree of covalency. The styphnate ions lie in approximately parallel planes linked by Pb atoms.

Properties

Lead styphnate's heat of formation is −835 kJ mol⁻¹. The loss of water leads to the formation of a sensitive anhydrous material with a density of 2.9 g cm⁻³. The variation of colors remains unexplained. Lead styphnate has a detonation velocity of 5.2 km/s and an explosion temperature of 265–280 °C after five seconds.

Applications

Lead styphnate is mainly used in small arms ammunition for military and commercial applications. It serves as a primary explosive used in firearms primers, which will ignite upon a simple impact. It is similarly used in blank cartridges for powder-actuated nail guns. Lead styphnate is also used as primer in microthrusters for small satellite stationkeeping.

External links

• National Pollutant Inventory - Lead and Lead Compounds Fact Sheet