Funival
_(2).jpg){kind=link}
The Funival is a Template:RailGauge gauge funicular railway in Val-d'Isère, France
The Funival starts above ground in La Daille and after a few hundred meters it enters a tunnel ending at the mountain station on top of the Bellevarde.
The Funival uses two trains, connected by cables, on a single track. Halfway, a short section of dual track (passing loop) allows the trains to pass each other.
Description
A single track starts in La Daille from where the train runs up an elevated track for Script error: No such module "convert".. The remaining Script error: No such module "convert".. runs through a drilled tunnel. Halfway a section of double track allows the climbing train to pass the downward train. A cable runs from the front of the lower train, via a construction of electric powered pulleys in the mountain station to the back of the descending train. The mass of the descending train helps pull the climbing train and electric motors provide the power to overcome the weight difference between the climbing and descending trains plus any friction.
During most runs the climbing train will be far heavier than the descending train as the main function of the Funival is to take skiers to the top of the mountain. If the descending train is heavier than the climbing (when more passengers travel down than up) the electric motors can work as brakes. Each train is also provided with mechanical brakes to act as emergency brakes if the main cable should break. Although the Funival runs summer and winter it was primarily built to bring skiers to the top of the mountain.
Technical details
| name | value |
| Altitude base station | Script error: No such module "convert". |
| Altitude mountain station | Script error: No such module "convert". |
| Climb | Script error: No such module "convert". |
| track length | Script error: No such module "convert".. |
| length viaduct | Script error: No such module "convert". |
| length tunnel | Script error: No such module "convert". |
| Maximum gradient | 53% |
| Location engines | mountain station |
| capacity train | 220 persons |
| capacity per hour | 2425 persons/hour. |
| speed | Script error: No such module "convert". |
| Inventor of Funiculaires | Dennis Creissels |
| Architect | Marc Albert |
| Producer | Montaval |
| Engineering | BOTTO |
| Technical installation | Waagner-Birò et Montaval |
| Total costs in 1987 | 60 Million French franc (≈€9,13 million) |
| civil engineering | 38 M FF (≈€ 5,79 million) |
| technical installation | 22 M FF (≈€ 3,35 million) |
| Construction year | 1987 |
See also
References
<templatestyles src="Reflist/styles.css" />
Script error: No such module "Check for unknown parameters".
External links
Script error: No such module "Side box".
- Photos of the Funival system and the track and cars (in French)
Script error: No such module "Coordinates".