Frederik IX Bridge

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

Template:Short description Template:Main otherScript error: No such module "Infobox".Template:Template otherScript error: No such module "Check for unknown parameters".Template:Main other The King Frederik IX bridge (Template:Langx; named for King Frederik IX of Denmark) is a combined road and railway bridge carrying the Danish national road 9 as well as Sydbanen and Lollandsbanen railway lines across the Guldborgsund strait between the islands of Falster and Lolland in Denmark. It joins the larger part of the city of Nykøbing on Falster with the smaller part of the town on Lolland. The rail link is a part of the railway section of the Fugleflugtslinjen transport corridor between Copenhagen, Denmark and Hamburg, Germany.

The bridge is Template:Convert and Template:Convert wide. It is a bascule bridge of beam design. The bridge carries four lanes of vehicle traffic and a single railway track.

History

In 1867, after many years of discussion, a pontoon bridge, the Christian IX Bridge, was constructed across the Guldborgsund from Nykøbing to Lolland, which at its inauguration was the longest in Denmark.Template:Sfn Furthermore, in 1875 a separate railway bridge was constructed to allow for the railway lines on Lolland to reach Nykøbing.Template:Sfn Both bridges were swing bridges which could be opened for passing ships.Template:Sfn These two bridges existed – with several reconstructions – until 1963.

The current Frederik IX Bridge was constructed between 1960 and 1962. The official opening was on 14 May 1963.

Current construction

There is a decision to widen the bridge with one more rail track and to fit electric overhead line, in connection with the Fehmarn Belt Tunnel. In order to cut costs, there a tunnel company wanted to disallow bridge openings.[1] However, it was later decided that the new bridge will also open.[2]

In 2023, the construction was slated to complete in 2026.[2]

Features

File:Frederick bridge bascules raised.jpg
Rail and road bascules in raised position

The bridge has a central 20m span with two bascules, both on the eastern side of the bridge. One carries four lanes of vehicle traffic while the other carries a rail link. The two parts normally operate together. Bridge control is staffed during the day and opened on request for passing ships, but may only be opened once every half-hour. It is planned for the bridge to be re-equipped for automatic operation.

File:Frederick bridge counterweight chamber.jpg
Chamber into which the bascule counterweights sink when raised, showing drive racks

The bascules consist of a long bridge span and a short counterweight section. Each bascule is supported by two pivot bearings, one either side. Two motors, one either side of the bridge, turn shafts passing through the centre of the pivot bearings. Further shafts take power to the rear of the counterweights, where there are pinions pressing against a rack mounted in the wall of the counterweight chamber, which drive the bascule.

File:Frederick bridge under raised bascules.jpg
Underside of raised bascules, showing tipped up railings and yellow driveshaft
File:Frederick bridge under bascules.jpg
Underside of bascules, showing bearings about which bascules rotate, and yellow drive shaft
File:Frederick bridge bascule falling.jpg
Bascules falling

See also

References

Template:Reflist

External links

Bibliography

  • Script error: No such module "citation/CS1".

Template:Falster Denmark Template:Lolland