Fend Flitzer
The Fend Flitzer was a three-wheeled invalid carriage designed and built by Fritz Fend. The Flitzer established many of the basic concepts on which Fend's later Messerschmitt Kabinenroller microcars were developed.
Background
In 1948, Fend, a former aeronautical engineer and technical officer in the Luftwaffe,Template:Sfn began production of a tricycle invalid carriage in his workshop in Rosenheim, Germany.Template:SfnTemplate:SfnTemplate:Sfn The tricycle had a front wheel that was steered by handlebars and powered by a mechanism actuated by pushing back and forth on the handlebars. Shortly afterward, it was offered with a Script error: No such module "convert". Victoria two-stroke proprietary engine normally used for motorizing bicycles.Template:Sfn
Fend then designed the Flitzer, a larger, better-enclosed invalid carriage. It was designed from the start to be powered by a gasoline engine. Whereas the earlier tricycle was both steered and powered by a single front wheel, the Flitzer had a pair of front wheels linked to the steering mechanism and a powered rear wheel.Template:Sfn
Specifications and development
The Flitzer was made with aluminium panels over a steel frameTemplate:Sfn and was enclosed at the front, sides, and back. It had a hatch at the top that was hinged at the front and tilted forward for the operator to get in.Template:Sfn The first version of the Flitzer was open, with a hole and a windshield in the hatch for the operator's head and shoulders to stick through and be protected from the wind.Script error: No such module "Unsubst". Flitzers made from September 1948 to 1950Template:Sfn were powered by a Script error: No such module "convert". Fichtel & Sachs two-stroke engine.Template:SfnTemplate:SfnTemplate:Sfn Suspension was by rubber springs loaded in torsion.Template:Sfn
In 1950 the engine was changed to a Script error: No such module "convert". Riedel/Imme.Template:SfnTemplate:SfnTemplate:Sfn By 1951, in response to customer requests for passenger-carrying capability, a scooter-type saddle was placed above the rear enclosure with footrests on either side of the body.Template:Sfn A closed version, on which the hatch had an enclosure that covered the operator, was made available. The enclosure included the windshield and side windows.Template:SfnTemplate:Sfn
Reception and legacy
About 250 Flitzers had been built when production stopped in 1951. Many of these invalid carriages had been bought by able-bodied individuals seeking basic personal transport.Template:Sfn This led Fend to believe that there would be a mass market for a larger, transport-oriented version of the Flitzer.Template:Sfn Fend began to design and develop a two-seat vehicle similar in concept to the Flitzer.Template:Sfn He also began looking for a manufacturer to mass-produce this vehicle. He came to an agreement with Messerschmitt for them to build Fend vehicles in their factory at RegensburgTemplate:SfnTemplate:Sfn Part of the agreement was that the cars carried the Messerschmitt name, with Fend's new design being designated the Messerschmitt KR175.Template:SfnTemplate:Sfn
Notes
<templatestyles src="Reflist/styles.css" />
Script error: No such module "Check for unknown parameters".
References
- Script error: No such module "citation/CS1".
- Script error: No such module "citation/CS1".
- Script error: No such module "Citation/CS1".
External links
- Bruce Weiner Microcar Museum - 1950 Fend Flitzer 101
- Template:Replace on YouTubeScript error: No such module "Check for unknown parameters". – video showing a Fend Flitzer 101 being driven on the road and arriving at a destination.