Caterpillar D8

The Caterpillar D8 is a track-type tractor designed and manufactured by Caterpillar since 1935. Today, the largest in Caterpillar's medium range, it was superseded by the D9 in 1955. Though it comes in many configurations, it is usually sold as a bulldozer equipped with a detachable large blade and a rear ripper attachment.

The model offered in 2025 is a D8 - Tier 4/Stage V, equipped with a 363 hp Cat C15 engine and an operating weight of 87083 lb.

History

File:Caterpillar D8H.jpg

The D8H was introduced in 1958 and produced to 1974; from 1970 on it had Template:Convert

File:Caterpillar D8R p2.JPG

D8 series with Caterpillar's "High Drive" elevated drive sprocket and ripper

File:MCB 1 Sled train departing Little America for traverse to Byrd Station.jpg

MCB 1 Sled train departing Little America for traverse to Byrd Station with SD8-LGPs

• 1935: RD8 (Template:Convert) introduced.
• 1937: The "R" prefix dropped, D8 debuts.
• 1940s: D8 2U Series (Template:Convert) introduced
• 1950: D8 new front-rounded grill that would last until D8K was replaced by D8L in 1982.
• 1953: SD8-LGP produced 1953-59 for military use in Greenland and Antarctica. The "S" indicates the frame was stretched and came with 48" or 54" wide pads with a 15'-16' blade. In 1955 Cat came out with the 286 hp motor for the new D9s and the Seabees put them in their LGPs.
• 1955: 1H Series D8 ends production; Template:Convert D8E and D8D introduced with new Template:Convert displacement (CID) D342 diesel engine. D8D had a torque converter and D8E had a direct drive transmission.
• 1956: D8D replaced by D8G.
• 1956: D8E replaced by D8F.
• 1958: Template:Convert D8H introduced.
• 1965: Power increased to Template:Convert
• 1970: D8 46a 48a power increased Template:Convert
• 1974: Template:Convert D8K replaced the D8H.
• 1982: Template:Convert D8L replaced D8K. The D8L was the first D8 with the elevated drive sprocket undercarriage.
• 1984: D8L SA (special application) for farming applications premiers. Available with a three point hitch, for mounted implements.
• 1987: D8N (Template:Convert) with differential steer transmission, the first track-type Caterpillar tractor to have one (the new D8N was smaller than the old D8L size, which was replaced by the new D9N model).
• 1996: Template:Convert D8R replaced D8N.
• 2000: D8R Series 2 replaced the D8R.
• 2004: Template:Convert D8T ACERT replaced D8R Series 2.

Blades

Several types of bulldozer blade can be used on the front of the tractor:

• Straight ("S-Blade"): A short blade with no lateral curve and no side wings. It can be used for fine grading
• Angle: held by a U shape frame that has three holes on each side, to set the blade to 3 positions: right, center, and left.
• Universal ("U-Blade"): A tall and very curved blade with large side wings to carry more material
• "S-U" combination: A shorter blade with less curvature and smaller side wings

Other blade types include landfill U-Blades, woodchip U-blades, and two-way blades for work inside the holds of ships.

See also

• Heavy equipment
• G-numbers U.S. Army Cats
• Caterpillar D9
• Caterpillar D7
• Bob Semple tank

References

Template:ReflistSNL G153 heavy tractor

External links

• Caterpillar D-Series Track-Type Tractors - Official Caterpillar website
• Caterpillar D8R Series II Track Type Tractor, (Bit-Ends, Edge-Cuttings, Protector and Tip Ripper
• Caterpillar D-Series Details