Bede Wing
| Bede Wing | |
|---|---|
| Script error: No such module "InfoboxImage". | |
| Role | Inflatable hang gliderTemplate:Short description |
| Manufacturer | Bede Aircraft |
| Designer | Jim Bede |
The Bede Wing was an inflated hang glider, designed in the 1970s by aeronautical engineer Jim Bede. Intended as a safer alternative to conventional hang gliders,[1] it resembled an early ram-air parachute, but instead was an inflatable structure, that could be filled with air for gliding, or with helium to act as a gas balloon.[2]
The aspect ratio of the Bede Wing was low, in the area of 1.8. Fitted with unusually long suspension lines, the Bede Wing had almost no dihedral.[3] It was also reported to have a lower sink rate than conventional hang gliders of the time.[4]
Although Bede intended to start full production of the Bede Wing,[4] the project came to nothing. However, it foreshadowed the introduction of ram-air inflated paragliders in the mid-1980s.Script error: No such module "Unsubst".
See also
Script error: No such module "Portal".
References
<templatestyles src="Reflist/styles.css" />
Script error: No such module "Check for unknown parameters".
