Aylwin-class destroyer

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

Template:Short description

Template:Infobox ship imageTemplate:Infobox ship class overviewTemplate:Infobox ship characteristics

The Aylwin class was a class of four destroyers in the United States Navy; all served as convoy escorts during World War I. The Aylwins were the second of five "second-generation" 1000-ton four-stack destroyer classes that were front-line ships of the Navy until the 1920s. They were known as "thousand tonners". All were scrapped in 1935 to comply with the London Naval Treaty.[1]

All four ships were built by William Cramp & Sons in Philadelphia.[2]

These ships were built concurrently with the Template:Sclass and in some references are considered to be in that class. In design and armament they were essentially repeats of the Cassin class.[1]

Design

Unlike the other "thousand tonner" classes, the Aylwins were not a significant improvement on the previous class.[1]

Armament

They retained the Cassins' armament of four [[4"/50 caliber gun|Template:Convert/50 caliber]] Mark 9 guns and eight 18-inch (450 mm) torpedo tubes in twin broadside mounts. Compared with the previous Template:Sclass of the "flivver" type, the increased gun armament reflected the increasing size of foreign destroyers they might have to fight. The broadside (two twin mounts each side) torpedo armament reflected the General Board's desire to have some torpedoes remaining after firing a broadside.[3] The class was probably equipped with one or two depth charge racks each for anti-submarine convoy escort missions in World War I.[4] Benham was equipped with four twin 4-inch mounts in 1917, but these were replaced with single mounts before she deployed overseas. By 1929 all except Parker had a [[3"/23 caliber gun|Template:Convert/23 caliber]] anti-aircraft gun added.[2]

Engineering

The ships were equipped with four White-Forster boilers supplying steam to two Cramp direct-drive steam turbines driving two shafts for Template:Convert as designed; all of the class exceeded this on trials.[5] Compound steam engines could be clutched to the shafts for economical medium-speed cruising.[1] Aylwin achieved Template:Convert on trials at Template:Convert; this was typical for the others of the class. Normal fuel oil capacity was 307 tons.[5]

File:USS Benham (DD-49).jpg
Benham in dazzle camouflage during World War I.

Ships in class

Ships of the Aylwin destroyer class[2]
Name Hull no. Shipyard Laid down Launched Commissioned Decommissioned Fate
Template:USS DD-47 William Cramp & Sons, Philadelphia 7 March 1912 23 November 1912 17 January 1914 23 February 1921 Scrapped 1935
Template:USS DD-48 William Cramp & Sons 11 March 1912 8 February 1913 30 December 1913 6 June 1922 Scrapped 1935
Template:USS DD-49 William Cramp & Sons 14 March 1912 22 March 1913 20 Jan 1914 7 July 1922 Scrapped 1935
Template:USS DD-50 William Cramp & Sons 7 May 1912 21 December 1912 26 March 1914 20 June 1922 Scrapped 1935

See also

Template:Sister project

References

Template:Reflist

Bibliography

  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1".

External links

Template:Military navigation Template:WWI US ships

  1. a b c d Gardiner and Gray, p. 122
  2. a b c Bauer and Roberts, p. 170
  3. Friedman, pp. 28–29
  4. Friedman, p. 68
  5. a b Script error: No such module "citation/CS1".