Ausper
Template:Short description Script error: No such module "Infobox".Template:Template otherScript error: No such module "Check for unknown parameters".Script error: No such module "Check for clobbered parameters".
The Ausper is a racing car that was made in the United Kingdom from 1960 to 1962 by Competition Cars of Australia.[1] It was constructed as a Formula Junior car, with a rear-mounted Cosworth engine set in a tubular space frame, with a Renault gearbox. It was based on the Tomahawk, a design from Australian Tom Hawkes, that was intended for export to his home country. One of the unusual features of the Ausper was the bodywork, which was very low, with an upswept tail and the drivers roll bar faired into the headrest.[1]
The Ausper was revised in 1962, with sleeker bodywork, and a total height of 24 inches to the top of the body.[1] Results were encouraging, but did not result in any title wins.
Formula One Project
Ausper developed plans for a Formula One car using a Clisby V6 engine, called the T4. The car was a poorly made copy of the Ferrari 156 F1. The car was slow off the line, handled poorly, but would get a third in its first and only outing in Formula Libre . But these plans never eventuated, which led to Ausper closing down.[1]
Models
| Name | Engine | Displacement | Horsepower | Horsepower RPM | Torque | Torque RPM | Weight |
|---|---|---|---|---|---|---|---|
| T2 | Volkswagen Beetle Flat 4 | Script error: No such module "convert". | Script error: No such module "convert". | 5,000 | Script error: No such module "convert". | 3,600 | Script error: No such module "convert". |
| T3 | Script error: No such module "convert". | 5,250 | Script error: No such module "convert". | 3,500 | Script error: No such module "convert". | ||
| T4[2] | Clisby V6 | Script error: No such module "convert". | Script error: No such module "convert". | 9,000 | Script error: No such module "convert". | 6,700 | Script error: No such module "convert". |