Argyle Line

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

Template:Short description Script error: No such module "Unsubst". Template:Use British English Script error: No such module "infobox".Script error: No such module "Check for unknown parameters". Template:Routemap The Argyle Line is a suburban railway located in West Central Scotland. The line serves the commercial and shopping districts of Glasgow's central area, and connects towns from West Dunbartonshire to South Lanarkshire. Named for Glasgow's Argyle Street, the line uses the earlier cut-and-cover tunnel running beneath that thoroughfare.

The term "Argyle Line" is commonly used to describe:

  • the extensive urban passenger train service that connects the towns and suburbs of North Clyde with Motherwell, Larkhall, and Lanark, to the southeast. Of the 48 stations, 4 are in West Dunbartonshire, 4 in East Dunbartonshire, 17 in Glasgow City, 10 in North Lanarkshire, and 13 in South Lanarkshire.[1]
  • the central portion of railway infrastructure encompassing less than Script error: No such module "convert"..

History

Prior to 1964

The Glasgow Central Railway (GCR) under central Glasgow opened in 1886, connecting the Lanarkshire and Dunbartonshire Railway at Maryhill Central and Stobcross Railway at Stobcross to the Lanarkshire and Ayrshire Railway near Kirkhill, Rutherglen and Coatbridge Railway at Carmyle, Clydesdale Junction Railway and Polloc and Govan Railway at Rutherglen, and Clydesdale Junction Railway at Newton. The line closed in 1964 as a result of the Beeching Axe.[2]

Overview 1979 opening

On 1 November 1979, Elizabeth II officially opened the Argyle Line (in conjunction with the inauguration of the modernised Glasgow Subway), with services commencing four days later.Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters".[3] This joint venture between British Rail and the Strathclyde Passenger Transport Executive (SPTE)[4] comprised a tunnel diversion and reopening the Script error: No such module "convert". Stobcross–Rutherglen low-level line. However, the Argyle name later applied to the combined DalmuirLanark routes.Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters".[5]

Infrastructure

The former Caledonian Railway (CR) line via Whiteinch, Partick West, and Partick Central (Kelvin Hall) remained abandoned. The new connection with the original North British Railway route via Hyndland and a rebuilt PartickScript error: No such module "Footnotes".Script error: No such module "Check for unknown parameters". also incorporated a grade-separated junction with the Queen Street Low Level route. The already electrified North Clyde Line northwest of Partick and West Coast Main Line (WCML) southeast of Rutherglen were linked by laying double tracks and installing overhead electrical wiring along the disused section that had separated these networks. At Rutherglen, a new platform was built and the main line ones abandoned.Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters".

Finnieston West Junction–Dalmarnock is sub-surface:

  • Brickwork was power washed and repaired.Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters".
  • Concrete slabs superseded ballast.Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters".
  • Former GCR stations at Glasgow Green and Glasgow Cross remained disused. The frontage of Glasgow Green station[6] was demolished in March 2012,[7] and the entrance to Glasgow Cross station (adjacent to the Tollbooth) has been turned into ventilation ducts, visible from the traffic island between Trongate and London Road.[8]
  • Argyle Street became a new station Script error: No such module "convert". west of the former Glasgow Cross.[9]
  • Exhibition Centre (called Finnieston until 1986) was rebuilt. Slightly to the west of the original GCR Stobcross station, the only commonality between the two is the location of much of the eastbound platform (which was originally the westbound one). A new siding enabled westbound trains to stable and turn back.Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters".
  • Tunnel lengths are Kelvinhaugh (Finnieston West Junction–Exhibition Centre) Script error: No such module "convert"., Stobcross (Exhibition Centre–Anderston) Script error: No such module "convert"., Anderston (Anderston–Glasgow Green) Script error: No such module "convert"., Canning St (Glasgow Green–Bridgeton) Script error: No such module "convert"., and Dalmarnock Rd (Bridgeton–Dalmarnock) Script error: No such module "convert"..[10]

Flooding

In December 1994, the River Kelvin breached its banks releasing a deluge into the Exhibition Centre–Argyle Street section to a depth of more than Script error: No such module "convert"., trapping two trains, and resulting in a nine-month closure.[11]Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters". Dalmuir-Lanark services were diverted over the North Clyde Line, running as far as Blairhill, and using the Gartsherrie connecting line to rejoin the Argyle Line further south of Coatbridge Central. Dalmarnock has been flooded several times.

Extensions

The Larkhall Line was opened as an extension to Argyle Line services in December 2005 by First Minister Jack McConnell. Formerly the CR Coalburn Branch, the rebuilt/new stations are Chatelherault, Merryton, and the Larkhall terminus.[4]Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters". The branch is single line throughout, with a crossing loop at Allanton. Milngavie, formerly a North Clyde service, became a destination.Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters".

The Whifflet Line service that reopened in October 1993Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters". received electrification of the Rutherglen–Whifflet section in December 2014.Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters". This enabled a rerouting through Glasgow Central Low Level to the western suburbs, increased frequency on the route, reduced WCML usage conflict, and created a diversionary path for long distance WCML services.[12] At the same time, Lanark services switched to Glasgow Central High Level.

Service patterns

<templatestyles src="Template:Hidden begin/styles.css"/>

Prior versions
Passenger trains per hour (Nov 1979 opening)
Terminus Via Terminus Mon–Sat Sun
Motherwell Bellshill Dumbarton Central
1
Script error: No such module "Check for unknown parameters".
Motherwell Blantyre Dumbarton Central
1
Script error: No such module "Check for unknown parameters".
Motherwell Bellshill Partick
2
Script error: No such module "Check for unknown parameters".
Motherwell Blantyre Partick
2
Script error: No such module "Check for unknown parameters".
Milngavie limited stops Lanark
1
Script error: No such module "Check for unknown parameters".
Passenger trains per hour (1982–83)Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters".[13]
Terminus Via Terminus Mon–Sat Sun
Motherwell Bellshill Dumbarton Central
1
Script error: No such module "Check for unknown parameters".
Motherwell Blantyre Dumbarton Central
1
Script error: No such module "Check for unknown parameters".
Motherwell Hamilton Central Dalmuir
2
Script error: No such module "Check for unknown parameters".
Motherwell Bellshill Dalmuir
2
Script error: No such module "Check for unknown parameters".
Lanark limited stops Anderston
1
Script error: No such module "Check for unknown parameters".
Passenger trains per hour (2002–03) Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters".[13]
Terminus Via Terminus Mon–Sat Sun
Motherwell Dalmuir
3
Script error: No such module "Check for unknown parameters".
Lanark Dalmuir
1
Script error: No such module "Check for unknown parameters".
Passenger trains per hour (2003–04) [14][15][16]
Terminus Via Terminus Mon–Sat (off peak)Script error: No such module "Check for unknown parameters". Sun
Lanark Holytown, Hamilton Central, Singer Dalmuir
1
Script error: No such module "Check for unknown parameters".
Motherwell Hamilton Central, Singer Dalmuir
1
Script error: No such module "Check for unknown parameters".
Motherwell Bellshill, Yoker Dalmuir
1
Script error: No such module "Check for unknown parameters".
Lanark Shieldmuir, Bellshill, Yoker Dalmuir
1
Script error: No such module "Check for unknown parameters".
Motherwell Hamilton Central, Yoker Balloch
2
Script error: No such module "Check for unknown parameters".
Lanark Shieldmuir, Bellshill Milngavie
1
Script error: No such module "Check for unknown parameters".
Motherwell Bellshill Milngavie
1
Script error: No such module "Check for unknown parameters".
Passenger trains per hour (2006–07)
Terminus Via Terminus Mon–Sat Sun
Lanark Holytown, Blantyre Milngavie
1
Script error: No such module "Check for unknown parameters".
Lanark Shieldmuir, Bellshill Milngavie
1
Script error: No such module "Check for unknown parameters".
Lanark Shieldmuir, Bellshill, Yoker Dalmuir
1
Script error: No such module "Check for unknown parameters".
Larkhall Singer (limited stops) Dalmuir
2
Script error: No such module "Check for unknown parameters".
Motherwell Blantyre Milngavie
1
Script error: No such module "Check for unknown parameters".
Motherwell Bellshill Milngavie
1
Script error: No such module "Check for unknown parameters".
Motherwell Bellshill, Yoker Dalmuir
1
Script error: No such module "Check for unknown parameters".
Motherwell Blantyre, Yoker Balloch
2
Script error: No such module "Check for unknown parameters".
Passenger trains per hour (2007–08)
Terminus Via Terminus Mon–Sat Sun
Lanark Holytown, Blantyre Milngavie
1
Script error: No such module "Check for unknown parameters".
Lanark Shieldmuir, Bellshill Milngavie
1
Script error: No such module "Check for unknown parameters".
Lanark Shieldmuir, Bellshill, Yoker Dalmuir
1
Script error: No such module "Check for unknown parameters".
Larkhall Singer (limited stops) Dalmuir
2
Script error: No such module "Check for unknown parameters".
Larkhall (limited stops) Partick
1
Script error: No such module "Check for unknown parameters".
Motherwell Blantyre Milngavie
1
Script error: No such module "Check for unknown parameters".
Motherwell Bellshill Milngavie
1
Script error: No such module "Check for unknown parameters".
Motherwell Bellshill, Yoker Dalmuir
1
Script error: No such module "Check for unknown parameters".
Motherwell Blantyre, Yoker Balloch
2
Script error: No such module "Check for unknown parameters".
Passenger trains (2014–15) Direction/Frequency per hour
Terminus Via Terminus Mon–Sat (off peak)Script error: No such module "Check for unknown parameters". Sun (from 8:20am)Script error: No such module "Check for unknown parameters".
Cumbernauld Motherwell, Hamilton Central, Yoker Dalmuir
NW/1
Script error: No such module "Check for unknown parameters".
Dalmuir Singer, Whifflet Motherwell
SE/1
Script error: No such module "Check for unknown parameters".
Dalmuir Singer Whifflet
SE/1
Script error: No such module "Check for unknown parameters".
Dalmuir Yoker Larkhall
SE/2
Script error: No such module "Check for unknown parameters".
Milngavie Hamilton Central Motherwell
SE/1
Script error: No such module "Check for unknown parameters".
both/2
Script error: No such module "Check for unknown parameters".
Milngavie Hamilton Central, Motherwell Cumbernauld
SE/1
Script error: No such module "Check for unknown parameters".
Glasgow Central Bellshill, Shieldmuir Lanark
both/2
Script error: No such module "Check for unknown parameters".
both/1
Script error: No such module "Check for unknown parameters".
Larkhall Singer Dalmuir
NW/2
Script error: No such module "Check for unknown parameters".
Larkhall Yoker Balloch
both/1
Script error: No such module "Check for unknown parameters".
Motherwell Hamilton Central, Yoker Dalmuir
NW/1
Script error: No such module "Check for unknown parameters".
Motherwell Whifflet Milngavie
NW/1
Script error: No such module "Check for unknown parameters".
Motherwell Whifflet Balloch
both/1
Script error: No such module "Check for unknown parameters".
Motherwell Bellshill Glasgow Central
both/1
Script error: No such module "Check for unknown parameters".
Whifflet Milngavie
NW/1
Script error: No such module "Check for unknown parameters".
Passenger trains per hour (2016–17)
Terminus Via Terminus Mon–Sat (off peak)Script error: No such module "Check for unknown parameters". Sun
Cumbernauld Blantyre, Yoker Dalmuir
1
Script error: No such module "Check for unknown parameters".
Lanark Bellshill Glasgow Central
2
Script error: No such module "Check for unknown parameters".
1
Script error: No such module "Check for unknown parameters".
Larkhall Milngavie
2
Script error: No such module "Check for unknown parameters".
Motherwell Blantyre, Yoker Dalmuir
1
Script error: No such module "Check for unknown parameters".
Motherwell Whifflet, Singer Dalmuir
1
Script error: No such module "Check for unknown parameters".
Motherwell Whifflet, Yoker Balloch
1
Script error: No such module "Check for unknown parameters".
Motherwell Blantyre Milngavie
2
Script error: No such module "Check for unknown parameters".
Motherwell Bellshill Glasgow Central
1
Script error: No such module "Check for unknown parameters".
Milngavie Blantyre Cumbernauld
1
Script error: No such module "Check for unknown parameters".
Whifflet Singer Dalmuir
1
Script error: No such module "Check for unknown parameters".

Services

Routes

At Dalmuir Park Junction, southeastwards enters the Yoker line, before rejoining at Hyndland East Junction,[17] and eastwards remains on the North Clyde (officially North Electric Main Line) via Singer and Westerton Junction,[18] where the Script error: No such module "convert". Milngavie Branch[19] joins. This route continues via Knightswood North and South junctions,[20] and Hyndland.[21]

Eastbound trains enter the Kelvinhaugh TunnelScript error: No such module "Footnotes".Script error: No such module "Check for unknown parameters". immediately to the west of Sandyford Street. This tunnel joins the original section on the Lanarkshire and Dunbartonshire Railway from Partick Central, just south of Kelvinhaugh Street; finally meeting the disused GCR Stobcross Depot Tunnel, just inside the common southeast portal of these two tunnels. The mouth of the Stobcross Depot Tunnel can be seen from the eastbound platform of Exhibition Centre.

Westbound trains ascend to join the North Clyde lineScript error: No such module "Footnotes".Script error: No such module "Check for unknown parameters". from Queen Street station. This steep incline originally gave access to the sidings at Queen's Dock from the Stobcross Railway.

The WCML is accessed after Rutherglen. At Rutherglen East Junction, the Whifflet line emerges eastwards, and the route later passes east of Bellshill. At Newton Junction, eastwards follows the WCML via Uddingston, and southeastwards is the Hamilton Circle. At Haughhead Junction, Script error: No such module "convert". east of Hamilton Central,[22] a Script error: No such module "convert".[23] branch leads to Larkhall. The Hamilton Circle terminates at Motherwell.

Bellshill is Script error: No such module "convert".[24] after leaving the WCML at Uddingston Junction. Beyond the station, the route joins the line south from Whifflet, returning to the WCML at Motherwell. Southeast Script error: No such module "convert". at Lanark Junction,[25][26] the Script error: No such module "convert".[27] single-track branch serves Lanark, the southeastern extremity.

File:318 Motherwell.JPG
Class 318s are a common sight on the Argyle Line. 318257 is pictured at Motherwell.
File:Classes 320 and 318 at Partick.jpg
Class 318s and Class 320s work the bulk of Argyle Line services. 318254 and 320313 stand side by side at Partick.

Frequency

Passenger trains per hour (2020/21)[28]
Terminus Via West of Mon–Sat (off peak)Script error: No such module "Check for unknown parameters". Sun (from 8:10am)Script error: No such module "Check for unknown parameters".
Dalmuir Yoker Glasgow Central Low Level 4
Dalmuir Singer Glasgow Central Low Level 2
Milngavie Glasgow Central Low Level 2
Balloch Glasgow Central Low Level 2
Passenger trains per hour (2020/21)[29]
Terminus Via East of Mon–Sat (off peak)Script error: No such module "Check for unknown parameters". Sun (from 8:20am)Script error: No such module "Check for unknown parameters".
Larkhall Hamilton Central Glasgow Central Low Level 2 1
Motherwell Whifflet Glasgow Central Low Level 1 1
Motherwell Hamilton Central Glasgow Central Low Level 1 2
Cumbernauld Motherwell, Hamilton Central Glasgow Central Low Level 1
Whifflet Glasgow Central Low Level 1

Rolling stock

At its opening, the rolling stock on the Argyle Line was Class 314 electric multiple units, which were then new.Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters". These were accompanied by a number of the older Class 303Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters". "Blue Train" sets from the North Clyde route. In the late 1980s and early 1990s, Class 311 trains also operated on this route. After the 303s were retired in 2002, the route was operated by a mixture of new Class 334 Alstom "Juniper" units,Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters". alongside a small number of 1980s vintage Class 318Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters". trains cascaded from the Ayrshire routes, with the original Class 314 sets transferred to the Cathcart Circle. Following the opening of the Airdrie-Bathgate rail link, most Class 334 units were transferred to services on this route. The Class 320s were subsequently fitted with yaw dampers, allowing for Script error: No such module "convert". running up from their previous Script error: No such module "convert". limit, which enabled them to replace the Class 334s on Argyle Line services.

The Argyle Line is operated by Class 320sScript error: No such module "Footnotes".Script error: No such module "Check for unknown parameters". and Class 318s with the occasional Class 334Script error: No such module "Footnotes".Script error: No such module "Check for unknown parameters". appearing and Class 385s covering Lanark services that now run into Glasgow Central. Class 380s used to operate the line from 2014 to 2019 covering Lanark services when they first ran into Central High Level.

Footnotes

<templatestyles src="Reflist/styles.css" />

  1. Script error: No such module "citation/CS1".
  2. Script error: No such module "citation/CS1".
  3. Script error: No such module "Citation/CS1".
  4. a b Railway Renaissance: Britain's Railways after Beeching , p. PT214, at Google Books
  5. Script error: No such module "citation/CS1".
  6. Script error: No such module "citation/CS1".
  7. Script error: No such module "citation/CS1".
  8. Script error: No such module "citation/CS1".
  9. Script error: No such module "citation/CS1".
  10. Script error: No such module "citation/CS1".
  11. The Railways of Glasgow, Post-Beeching , p. PT62, at Google Books
  12. Railway Renaissance: Britain's Railways after Beeching , p. PT216, at Google Books
  13. a b The Railways of Glasgow, Post-Beeching , p. PT121, at Google Books
  14. Script error: No such module "citation/CS1".
  15. Script error: No such module "citation/CS1".
  16. Script error: No such module "citation/CS1".
  17. Script error: No such module "citation/CS1".
  18. Script error: No such module "citation/CS1".
  19. Script error: No such module "citation/CS1".
  20. Script error: No such module "citation/CS1".
  21. Script error: No such module "citation/CS1".
  22. Script error: No such module "citation/CS1".
  23. Script error: No such module "citation/CS1".
  24. Script error: No such module "citation/CS1".
  25. Script error: No such module "citation/CS1".
  26. Script error: No such module "citation/CS1".
  27. Script error: No such module "citation/CS1".
  28. Script error: No such module "citation/CS1".
  29. Script error: No such module "citation/CS1".

Script error: No such module "Check for unknown parameters".

References

  • Script error: No such module "citation/CS1".

Script error: No such module "Navbox".