6×45mm SAW
Script error: No such module "Unsubst". Script error: No such module "Infobox".Template:Template otherScript error: No such module "Check for unknown parameters".
The 6×45mm SAW describes an experimental series of rimless bottlenecked intermediate cartridges developed in the 1970s for the U.S. Army. The cartridges were produced in a variety of sizes and from a variety of materials. The intent was to develop a cartridge that would replace all 5.56×45mm NATO weapons as well as most 7.62×51mm NATO rifles and machine guns in the U.S. military. Eventually, the 5.56mm was retained and only the machine gun portion of the SAW (Squad Automatic Weapon) competition was successful. That program led to the M249 light machine gun.
Note that the dimensions listed to the right are for 6×45mm SAW rounds.[1] Three versions were produced for testing in the early 1970s. An aluminum-cased version was developed, as well as the about Script error: No such module "convert". longer 6mm SAW Long.[2]
Design and development
During the 1970s, the U.S. Army was looking to develop a new squad automatic weapon (SAW) that was lighter than the M60 machine gun with an effective range out to Script error: No such module "convert".. The 7.62 mm cartridge was too heavy and the 5.56 mm cartridge could not provide effective performance at that range. Research led to the development of the 6×45mm SAW cartridge. Its Script error: No such module "convert". bullet had a muzzle velocity of Script error: No such module "convert". and muzzle energy of Script error: No such module "convert".. The relatively heavy bullet combined with a moderate velocity had optimum long-range performance. A light-alloy cased version of the round was also produced. Because aluminium alloy had a tendency to catch fire, the case length was extended to Script error: No such module "convert". to make up for loss in capacity caused by the need to line the inside of the case with fire-resistant material. Although the 6mm SAW's performance proved satisfactory, there were supply concerns over adopting a third rifle caliber. Development of the 6mm SAW was abandoned when an improved 5.56 mm round was promised, which arrived as the M855. 6×45mm SAW cartridges depending on their case materiel and bullet weigh Script error: No such module "convert"..Script error: No such module "Unsubst".
Chambered firearms
- Brunswick machine gun[3]
- Maremont XM233[4]
- Ford Aerospace XM234[5]
- Rodman Laboratories XM235[4]
- Ford Aerospace XM248[4]
See also
- .276 Pedersen - Another US Army experimental cartridge that never saw service
- 6×45mm - A 5.56×45mm necked up to accept 6mm bullets but with a smaller case head diameter when compared to the 6mm SAW
- .22 Savage Hi-Power
- 5.8×42mm DBP87 The People's Republic of China standard-issue cartridge
- .243 Winchester
- Type 38 Rifle Cartridge
References
<templatestyles src="Reflist/styles.css" />
- ↑ Municion.org on the 6x45mm SAW (translated)
- ↑ Municion.org on the 6x50mm SAW Long (translated)
- ↑ <templatestyles src="Citation/styles.css"/>Template:Citation/make link, Charles Edword Rostell, "Machine gun", published Script error: No such module "auto date formatter"., assigned to Brunswick CorpScript error: No such module "Check for unknown parameters".
- ↑ a b c Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
Script error: No such module "Check for unknown parameters".