Nissan VG engine

From Wikipedia, the free encyclopedia
(Redirected from VG30E)
Jump to navigation Jump to search

Script error: No such module "Unsubst".Template:Infobox automobile engine The VG engine is a family of V6 engines designed and produced by Nissan between 1983 and 2004. It was added to a new engine family name PLASMA (Powerful & Economic, Lightweight, Accurate, Silent, Mighty, Advanced).

Produced as Japan's (as well as Nissan's) first mass-produced V6 engines, the iron block/aluminum head 60° VG engine was produced in displacements between 2.0 and 3.3 liters. Early versions used SOHC cylinder heads with two valves per cylinder; later models featured DOHC cylinder heads, four valves per cylinder, a slightly different engine block and N-VCT, Nissan's own version of variable valve timing, delivering a smoother idle and more torque at low to medium engine speeds.

Both production blocks and head castings were used successfully in the Nissan GTP ZX-Turbo and NPT-90 race cars which won the IMSA GT Championship three years in a row.

Origins

Development of the VG series began in 1979 by Nissan Machinery, a former member of the Nissan Group keiretsu. The objective was to replace the inline 6 L engine, which traces its roots back to the Mercedes-Benz M180 engine introduced in 1951, with an all-new V6 engine.

Nissan engineers wanted the VG to have improved performance, fuel economy, reliability, and refinement, while being both lighter and more compact than its predecessor. The resulting engine was designed from scratch, sharing little to no mechanical components with its predecessor or any other automaker. Extensive computer design techniques were used during development, which made the VG series one of the most advanced and high-tech engines of its day.

The VG engine series featured a sequential multi-port fuel injection system, and Nissan's Electronic Concentrated Control System (ECCS). ECCS used a microprocessor and an oxygen sensor to control fuel delivery, spark timing, exhaust gas recirculation rate, and engine idle speed, depending on the current operating conditions of the engine. This system reduced carbon emissions, improved fuel economy, and improved engine performance during cold-start and warm-up conditions.

The advantages of the VG engine over its inline 6 predecessor was that its V6 configuration would have greater torsional rigidity for higher performance potential, and its shorter length would give Nissan designers and engineers more freedom for vehicle design, allowing for both more frontal crush zone space and transverse mounting for front-wheel-drive vehicles.

All VG engines use a timing belt to synchronize the camshafts with the crankshaft rather than a timing chain. The VG series engine was put into thousands of Nissan vehicles, debuting in Japan in the 1983 Nissan Gloria/Nissan Cedric and in the US and other markets in the 1984 Nissan 300ZX, making it the first V6 engines made by a Japanese manufacturer to be produced in mass-production.

After the introduction of the VQ engine in 1994, the VG engine was slowly phased out in Nissan cars, and after 2002 it was only available in the Nissan Frontier and Nissan Xterra. The VG engine was retired in 2004, by which time all V6-powered Nissans had switched to the VQ. The last vehicle powered by a VG series engine was the Y31 Nissan Cedric for fleet use, which kept use of the VG20P engine for more than 20 years until it was retired in 2007.

VG20E

Script error: No such module "Unsubst".

File:Nissan VG20E engine.jpg
VG20E in a Nissan Leopard

The VG20E is a Script error: No such module "convert". SOHC engine produced from 1983 on. It produces between Template:Cvt and Template:Cvt net. In the earlier gross rating system, early eighties' models claim Template:Cvt.

Applications:

VG20ET

Script error: No such module "Unsubst". The VG20ET was based on the VG20E, but with an added variable-geometry turbocharger. The VG20ET produces Script error: No such module "convert".. This SOHC motor debuted after the VG20E in 1984. Also coming with the Y30, this motor was known as the "Jet Turbo", and came with the Nissan Leopard models XS, and XS-II Grand Selection. Contrary to the VG30ET that came out in the US, the VG20ET came with an intercooler in certain models to push the horsepower output to Template:Cvt, a great jump from the normally aspirated VG20E. The turbo included with the VG20ET had two different settings. At low speeds, the turbo's wastegate would stay closed improving the response at low rpm. At high speeds, the flap would stay open, decreasing resistance and increasing exhaust flow. At its maximum flow, the flap would open at an angle of 27 degrees, while the A/R ranged from 0.21–0.77. Being that the VG20ET had a short stroke Script error: No such module "convert"., it was thought to have insufficient low end torque. Nevertheless, the VG20ET was a great improvement over the VG20E.

Applications:

VG20DET

Script error: No such module "Unsubst". The VG20DET is an DOHC Script error: No such module "convert". engine with a ceramic turbocharger and intercooler. It has a bore and a stroke of Script error: No such module "convert". and produces Template:Cvt. This engine features NVTCS (Nissan's Valve Timing Control System).

Applications:

VG20P

Script error: No such module "Unsubst". The VG20P is the Autogas (Liquified petroleum gas) version of the VG20. It produces Script error: No such module "convert". at 5,600 rpm and Script error: No such module "convert". at 2,400 rpm. Later versions (2004–2005) produce Script error: No such module "convert". at 6,000 rpm and Script error: No such module "convert". at 2,400 rpm. It is an overhead cam, twelve-valve engine.

Applications:

VG30S

Script error: No such module "Unsubst". The VG30S is a Script error: No such module "convert". SOHC twelve-valve engine with an electronic carburettor which produces Script error: No such module "convert". at 4,800 rpm and Script error: No such module "convert". at 3,600 rpm. This engine was mainly offered in export markets with more lenient environmental regulations, such as the Middle East and Africa.

Applications:

VG30i

Script error: No such module "Unsubst". The VG30i is a Script error: No such module "convert". engine produced from 1986 through 1989. It features a throttle body fuel injection system. It has a long crank snout, a cylinder head temperature sensor positioned behind the timing belt cover, and a knock sensor in the cylinder valley (on California models only). It produces Script error: No such module "convert". at 4,800 rpm and Script error: No such module "convert". at 2,800 rpm.

Applications:

VG30E

Script error: No such module "Unsubst".

File:VG30E.jpg
VG30E

The Script error: No such module "convert". VG30E produced Script error: No such module "convert". and Script error: No such module "convert".. Bore and stroke is Script error: No such module "convert".. In the 300ZX, it produced Script error: No such module "convert". and Script error: No such module "convert". of torque. In April 1987 the "W" series VG30 was released, adding 5 horsepower but leaving torque unchanged. In 1989, the Maxima received the Script error: No such module "convert". rating, but also used a variable intake plenum improving torque to Script error: No such module "convert". at 3200 rpm.

Applications:

VG30ET

File:Nissan VG30ET engine (1984 300ZX Turbo).jpg
VG30ET in a 1984 300ZX (Z31)

The Script error: No such module "convert". VG30ET was available in early production with a single Garrett T3 turbocharger at Script error: No such module "convert". and a 7.8:1 compression ratio. The USDM and JDM version produced Template:Cvt and Script error: No such module "convert".. European versions produced Script error: No such module "convert". and Script error: No such module "convert".. When "W"-Series VG30 was released in April 1987, horsepower was increased to Template:Cvt. All 1987 models featured a T3 turbocharger at Script error: No such module "convert".. In 1988 the compression ratio was changed to 8.3:1 and turbocharged with a single Garrett T25 turbocharger at Script error: No such module "convert". to reduce turbo lag.

The engine specified as the VG30ET engine in the Nissan GTP ZX-Turbo Racecar, was a heavily modified VG30ET producing over Script error: No such module "convert". at 8,000 rpm, and over Script error: No such module "convert". at 5,500 rpm.[1]

Applications:

VG30DE

File:1990 300zx engine.jpg
VG30DE

The first DOHC 24 valve VG30DE engine was developed for the 1985 MID4 concept. The Script error: No such module "convert". VG30DE produces Script error: No such module "convert". and Script error: No such module "convert".. Bore and stroke is Script error: No such module "convert"..[2] Original Japanese market units claimed Script error: No such module "convert"..[3] There are two versions of the VG30DE. The first was introduced in 1986 and was never sold in North America or other countries, and was exclusively offered on the Japanese 300ZR (Z31) and Nissan Leopard F31. The second was introduced in 1989, this time being sold outside of Japan and into North America and other countries in the 300ZX (Z32) and the Japan-only Cima. The VG30DE has two throttle bodies facing the front of the vehicle (Nissan 300ZX and Fairlady Z) or two throttle bodies to the left (sedans and 300ZR). It was also installed with N-VCT, an early form of variable valve timing.

Early VG30DEs used large oval intake ports, and round exhaust ports, though the flange was similar to the SOHC VG engine, bolt spacing was slightly different. Late VG30DE's used slightly smaller oval intake ports, and oval exhaust ports. The bolt spacing was shared with the round-port variant from earlier years.

Applications:

Years Model Power output
1985 Nissan MID4 Concept (Not-Production)
1986–1989 Nissan 300ZX Z31 (300ZR only) Script error: No such module "convert".
1990–1997 Nissan 300ZX Z32 Script error: No such module "convert".
1989–2000 Nissan Fairlady Z Z32 Script error: No such module "convert".
1986–1992 Nissan Leopard F31 Script error: No such module "convert".
1992–1998 Infiniti J30/Nissan Leopard J Ferie Script error: No such module "convert".
1992–1995 Nissan Gloria and Cedric Script error: No such module "convert".
1989–1991 Nissan Cima Script error: No such module "convert".

VG30DET

The VG30DET is a Script error: No such module "convert"., 24-valve, DOHC, VTC-equipped engine equipped with a non-intercooled T3 (Nissan N1 Type) 4-bolt Garrett Turbo running between Script error: No such module "convert".. Generating up to Template:Cvt and measuring Script error: No such module "convert". depending on the production year and application, it is a single-turbo engine that was used from 1987 through 1995 in the Japanese market, and the predecessor to the VG30DETT engine.

While this engine is similar to the VG30DE, it used different heads and inlet manifold. Contrary to popular belief, it was not available in the Nissan 300ZR model - the 300ZR only had an early version of the (non-turbo) VG30DE. The engine was available in the Cedric, Gloria, Cima and Leopard chassis.[4]

Applications:

VG30DETT

File:VG30DETT 001.jpg
VG30DETT

The VG30DETT is an iron block/aluminum head twin-turbo, twin intercooler Script error: No such module "convert". version first seen in the 1987 MID4-II concept. Producing Script error: No such module "convert". in the MID-4 and coming in at a weight of Template:Cvt, it was the last of Nissan's DOHC belt-driven 4 valve per cylinder turbocharged engines put into production, following the CA18DET and RB20DET.

The engine's hybrid T22/TB02 twin-turbos were developed exclusively for Nissan,[5] and it came with Nissan's NVTCS valve timing control system).

The production engine as used in the 1989–2000 300ZX (Z32) develops Script error: No such module "convert". at 6400 rpm and Script error: No such module "convert". at 3600 rpm with a five-speed manual transmission, and Script error: No such module "convert". and Script error: No such module "convert". of torque with a four-speed automatic transmission. JDM cars claimed Script error: No such module "convert"., due to a gentlemen's agreement by Japanese automobile manufacturers that was in effect at the time until 2005.

Applications:

VG33E

Script error: No such module "Unsubst". The VG33E is a Script error: No such module "convert". cast iron block, aluminum head, SOHC version produced between 1996 and 2004. It has sequential fuel injection, two valves per cylinder with self-adjusting hydraulic followers, forged steel connecting rods, one-piece cast camshafts, and a cast aluminum lower intake manifold, with either a cast aluminum or plastic/composite upper intake manifold plenum.

Bore and stroke are Script error: No such module "convert".. Compression ratio is 8.9:1. Output is Script error: No such module "convert". at 4,800 rpm, depending on year/vehicle, with Script error: No such module "convert". of torque at 2,800 rpm.

The VG33E was built in Smyrna, Tennessee, and used in SUVs, pickups, and minivans.

Applications:

The VG33E reportedly remained in production in the Nissan Paladin (rebadged as Dongfeng Oting) as an optional engine for the Chinese market until 2015.

VG33ER

Script error: No such module "Unsubst". The Script error: No such module "convert". VG33ER is a supercharged version of the VG33 only sold in North America. It produces Script error: No such module "convert". at 4,800 rpm with Script error: No such module "convert". of torque at 2,800 rpm.

Applications:

  • 2001–2004 Nissan Frontier SC
  • 2002–2004 Nissan Xterra SC

See also

References

<templatestyles src="Reflist/styles.css" />

  1. [1] Nissan Heritage Collection - November 2019
  2. Script error: No such module "Citation/CS1".
  3. Script error: No such module "citation/CS1".
  4. Answers to Readers Questions By: Sarah Forst NissanPerformanceMag.com - September 2003
  5. Nissan VG30DETT EngineTemplate:Category handler[<span title="Script error: No such module "string".">usurped]Script error: No such module "Check for unknown parameters"., JDM Spec Engines

Script error: No such module "Check for unknown parameters".

External links

Script error: No such module "Navbox". Script error: No such module "Navbox".