Sound power

Sound power or acoustic power is the rate at which sound energy is emitted, reflected, transmitted or received, per unit time. It is defined as "through a surface, the product of the sound pressure, and the component of the particle velocity, at a point on the surface in the direction normal to the surface, integrated over that surface." The SI unit of sound power is the watt (W). It relates to the power of the sound force on a surface enclosing a sound source, in air.

For a sound source, unlike sound pressure, sound power is neither room-dependent nor distance-dependent. Sound pressure is a property of the field at a point in space, while sound power is a property of a sound source, equal to the total power emitted by that source in all directions. Sound power passing through an area is sometimes called sound flux or acoustic flux through that area.

Sound power level L_WA

File:Atlas Copco XAHS 347-pic7-Max. sound power level.jpg

Maximum sound power level (L_WA) related to a portable air compressor

Regulations often specify a method for measurement that integrates sound pressure over a surface enclosing the source. L_WA specifies the power delivered to that surface in decibels relative to one picowatt. Devices (e.g., a vacuum cleaner) often have labeling requirements and maximum amounts they are allowed to produce. The A-weighting scale is used in the calculation as the metric is concerned with the loudness as perceived by the human ear. Measurements in accordance with ISO 3744 are taken at 6 to 12 defined points around the device in a hemi-anechoic space. The test environment can be located indoors or outdoors. The required environment is on hard ground in a large open space or hemi-anechoic chamber (free-field over a reflecting plane.)

Table of selected sound sources

Here is a table of some examples, from an on-line source. For omnidirectional point sources in free space, sound power in L_WA is equal to sound pressure level in dB above 20 micropascals at a distance of 0.2821 m

Situation and sound source	Sound power (W)	Sound power level (dB ref 10−12 W)
Saturn V rocket		200
Turbojet engine		170
Turbofan aircraft at take-off		150
Turboprop aircraft at take-off		140
Machine gun Large pipe organ		130
Symphony orchestra Heavy thunder Sonic boom		120
Rock concert Chain saw Accelerating motorcycle		110
Lawn mower Car at highway speed Subway steel wheels		100
Large diesel vehicle		90
Loud alarm clock		80
Relatively quiet vacuum cleaner		70
Hair dryer		60
Radio or TV		50
Refrigerator Low voice		40
Quiet conversation		30
Whisper of one person Wristwatch ticking		20
Human breath of one person		10
Reference value		0

Mathematical definition

Sound power, denoted P, is defined by

$P=\mathbf{𝐟}\cdot \mathbf{𝐯}=Ap\mathbf{𝐮}\cdot \mathbf{𝐯}=Apv$

where

• f is the sound force of unit vector u;
• v is the particle velocity of projection v along u;
• A is the area;
• p is the sound pressure.

In a medium, the sound power is given by

$P=\frac{A{p}^2}{\rho c}\cos \theta ,$

where

• Template:Mvar is the area of the surface;
• Template:Mvar is the mass density;
• Template:Mvar is the sound velocity;
• Template:Mvar is the angle between the direction of propagation of the sound and the normal to the surface.
• Template:Mvar is the sound pressure.

For example, a sound at SPL = 85 dB or p = 0.356 Pa in air (ρ = and c = ) through a surface of area A = normal to the direction of propagation (θ = 0°) has a sound energy flux P = .

This is the parameter one would be interested in when converting noise back into usable energy, along with any losses in the capturing device.

Relationships with other quantities

Sound power is related to sound intensity:

$P=AI,$

where

• A stands for the area;
• I stands for the sound intensity.

Sound power is related sound energy density:

$P=Acw,$

where

• c stands for the speed of sound;
• w stands for the sound energy density.

Sound power level

Sound power level (SWL) or acoustic power level is a logarithmic measure of the power of a sound relative to a reference value.
Sound power level, denoted L_W and measured in dB, is defined by:

$L_W=\frac{1}{2}\ln \left(\frac{P}{P_0}\right)\mathrm{N}\mathrm{p}={\log }_{10}\left(\frac{P}{P_0}\right)\mathrm{B}=10{\log }_{10}\left(\frac{P}{P_0}\right)\mathrm{d}\mathrm{B},$

where

• P is the sound power;
• P₀ is the reference sound power;
• 1 Np = 1 is the neper;
• 1 B = Template:Sfrac ln 10 is the bel;
• 1 dB = Template:Sfrac ln 10 is the decibel.

The commonly used reference sound power in air is

$P_0=1\mathrm{p}\mathrm{W}.$

The proper notations for sound power level using this reference are L_{W/(1 pW)} or L_W (re 1 pW), but the suffix notations dB SWL, dB(SWL), dBSWL, or dB_SWL are very common, even if they are not accepted by the SI.

The reference sound power P₀ is defined as the sound power with the reference sound intensity I₀ = 1 pW/m² passing through a surface of area A₀ = 1 m²:

$P_0=A_0{I}_0,$

hence the reference value P₀ = 1 pW.

Relationship with sound pressure level

The generic calculation of sound power from sound pressure is as follows:

$L_W=L_p+10{\log }_{10}\left(\frac{A_S}{A_0}\right)\mathrm{d}\mathrm{B},$

where: $A_S$ defines the area of a surface that wholly encompasses the source. This surface may be any shape, but it must fully enclose the source.

In the case of a sound source located in free field positioned over a reflecting plane (i.e. the ground), in air at ambient temperature, the sound power level at distance r from the sound source is approximately related to sound pressure level (SPL) by

$L_W=L_p+10{\log }_{10}\left(\frac{2\pi r^2}{A_0}\right)\mathrm{d}\mathrm{B},$

where

• L_p is the sound pressure level;
• A₀ = 1 m²;
• $2\pi r^2,$ defines the surface area of a hemisphere; and
• r must be sufficient that the hemisphere fully encloses the source.

Derivation of this equation:

$\begin{array}{rl}{L}_W& =\frac{1}{2}\ln \left(\frac{P}{P_0}\right)\\ & =\frac{1}{2}\ln \left(\frac{AI}{A_0{I}_0}\right)\\ & =\frac{1}{2}\ln \left(\frac{I}{I_0}\right)+\frac{1}{2}\ln \left(\frac{A}{A_0}\right).\end{array}$

For a progressive spherical wave,

$z_0=\frac{p}{v},$

$A=4\pi r^2,$ (the surface area of sphere)

where z₀ is the characteristic specific acoustic impedance.

Consequently,

$I=pv=\frac{p^2}{z_0},$

and since by definition I₀ = p₀²/z₀, where p₀ = 20 μPa is the reference sound pressure,

$\begin{array}{rl}{L}_W& =\frac{1}{2}\ln \left(\frac{p^2}{p_0^2}\right)+\frac{1}{2}\ln \left(\frac{4\pi r^2}{A_0}\right)\\ & =\ln \left(\frac{p}{p_0}\right)+\frac{1}{2}\ln \left(\frac{4\pi r^2}{A_0}\right)\\ & =L_p+10{\log }_{10}\left(\frac{4\pi r^2}{A_0}\right)\mathrm{d}\mathrm{B}.\end{array}$

The sound power estimated practically does not depend on distance. The sound pressure used in the calculation may be affected by distance due to viscous effects in the propagation of sound unless this is accounted for.

External links

• Sound power and Sound pressure. Cause and Effect
• Ohm's Law as Acoustic Equivalent. Calculations
• Relationships of Acoustic Quantities Associated with a Plane Progressive Acoustic Sound Wave
• NIOSH Powertools Database Template:Webarchive
• Sound Power Testing