Ram-air intake
Template:Short description Template:More citations needed
A ram-air intake is an intake design which uses the dynamic air pressure created by vehicle motion, or ram pressure, to increase the static air pressure inside of the intake manifold on an internal combustion engine, thus allowing a greater massflow through the engine and thereby increasing engine power.[1]
Application
The ram-air intake works by reducing the intake air velocity by increasing the cross-sectional area of the intake ducting. When gas velocity decreases the pressure is increased. The increased pressure in the air box will ultimately have a positive effect on engine output as more oxygen will enter the cylinder during each engine cycle.
Ram-air systems are used on high-performance vehicles, most often on performance cars, and, extremely rarely, motorcycles. The 1990 Kawasaki Ninja ZX-11 C1 model used a ram-air intake, the very first on any production motorcycle.[2][3] Ram-air was a feature on some cars in the sixties. It fell out of favor in the seventies, but recently made a comeback. While ram-air intakes may increase the volumetric efficiency of an engine, Template:Citation needed span
At low speeds (subsonic speeds) increases in static pressure are however limited to a few percent.Template:Clarification neededScript error: No such module "Unsubst".
-
Shaker-style ram-air hood scoop on a 1969 Mustang Mach 1
-
Ram-air intake below the headlight of a Kawasaki ZX-12R
