Smith & Wesson Model 27
Template:Refimprove Script error: No such module "Infobox".Template:Template otherScript error: No such module "Check for unknown parameters".
The Smith & Wesson Model 27 is a six-shot, double-action revolver chambered for the .357 Magnum cartridge and manufactured by the United States company Smith & Wesson. It was first produced in 1935, and many versions of it are still in production today. The Model 27 was built on S&W's carbon steel, large N-frame, had adjustable sights, and was available at various times with 3<templatestyles src="Fraction/styles.css" />1⁄2", 4", 5", 6", 6<templatestyles src="Fraction/styles.css" />1⁄2", 8<templatestyles src="Fraction/styles.css" />3⁄8", 8<templatestyles src="Fraction/styles.css" />3⁄4", or 10<templatestyles src="Fraction/styles.css" />5⁄8" barrel lengths.
History
When first introduced by Smith & Wesson in 1935, it was known as the Registered Magnum.[1] The model was essentially a custom-order revolver. Barrel lengths could be had in Script error: No such module "convert". increments from Script error: No such module "convert". inches in length. In addition to the different lengths of barrels available, there were different grips, front sights, triggers, hammers, and finishes available. Each Registered Magnum came with a certificate of authenticity.
Even though it was introduced in the middle of the Great Depression and was extremely expensive, Smith & Wesson found itself backlogged with orders for the four years that it produced the Registered Magnum.[2] The Kansas City Police Department issued the Registered Magnum to its officers, and many other law enforcement officers across the United States carried the Registered Magnum. In 1939, Smith & Wesson stopped producing the Registered Magnum. It was replaced with the Model 27, which was available with barrel lengths of Script error: No such module "convert".. It has been reported that these were the most popular barrel lengths for the Registered Magnum.[3] Essentially, the Model 27 was still the Registered Magnum, but standardized for ease of production and economy, the Smith & Wesson Model 28 "Highway Patrolman" was introduced as a lower-cost version of the Model 27 in 1954, stripped of some of the features of the Model 27, such as polishing.
It was noted for its durability and reliability. The 3<templatestyles src="Fraction/styles.css" />1⁄2-inch barrel length was extremely popular with FBI agents from the 1940s through the 1970s. Skeeter Skelton considered the Model 27 with a 5-inch barrel as the best all-around handgun. General George Patton carried an ivory-handled Registered Magnum with a 3<templatestyles src="Fraction/styles.css" />1⁄2-inch barrel (along with his ivory-handled Colt Peacemaker); Patton called the Model 27 his "killing gun".[4]
Engineering and production changes[5]
| Model | Year | Modifications |
|---|---|---|
| .357 Magnum | Pre-1957 | Before 1957 produced as the .357 Magnum |
| 27 | 1957 | Stamping of model number continued as the Model 27 |
| 27-1 | 1960 | Changed extractor rod, right hand to left hand thread |
| 27-2 | 1961 | Cylinder stop changed, eliminated trigger guard screw |
| 27-2 | 1967 | 6½ barrel discontinued |
| 27-2 | 1968 | Delete diamond grip |
| 27-2 | 1969 | Changed to N serial prefix |
| 27-2 | 1975 | Target trigger, target hammer, partridge front sight on 6" and 8-3/8" barrel, introduced with Goncalo Alves target stock and case |
| 27-2 | 1979 | 3½" and 5" barrel discontinued, 4" introduced with red ramp front sight and white outline rear sight |
| 27-2 | 1980 | Target stocks standard |
| 27-3 | 1982 | Eliminate cylinder counterbore and pinned barrel, change in cylinder length to 1.57" |
| 27-3 | 1986 | Discontinue nickel finish |
| 27-4 | 1988 | New yoke retention system / stud radius package / floating hand |
| 27-5 | 1990 | Longer stop notch in cylinder |
| 27-5 | 1992 | Discontinue 4" and 8-3/8" barrel |
| 27-6 | 1993 | Hogue Grips, drill and tap frame, change rear leaf sight, change extractor |
| 27-6 | 1994 | Model 27 Discontinued |
| 27-7 | 2000 | Performance Center Version 8 shot, built on N frame with floating firing pin and extended frame lug |
| 27-8 | 2008 | Reintroduced as the Model 27 Classic |
Variants
Script error: No such module "Infobox".Template:Template otherScript error: No such module "Check for unknown parameters".Script error: No such module "Unsubst". The stainless steel Model 627 was introduced in 1989 as the "Model of 1989". It featured a <templatestyles src="Fraction/styles.css" />5+1⁄2-inch barrel, a 6-shot unfluted cylinder, and had a round butt with S&W Combat stocks.Script error: No such module "Unsubst".
In 1996, the Smith & Wesson Performance Center began production of an 8-shot 627. The 627 has a Script error: No such module "convert". barrel with no muzzle brake or ports. The cylinder is unfluted. The revolver is made of stainless steel, with a matte finish and wood grips.Script error: No such module "Unsubst".
Model 327
In 2008, the eight-shot, scandium-framed Smith & Wesson Model 327 was introduced. A variant of the 327, the 327NG, is part of the NightGuard line.Script error: No such module "Unsubst".
The Smith & Wesson Model 327PD is an eight-shot double-action revolver that has a 4-inch stainless steel barrel with no muzzle brake or ports. It has a scandium alloy frame and a titanium cylinder. It comes with rosewood Hogue grips. It uses a light-gathering HI-VIZ front sight and an adjustable V-notch rear sight. The revolver finish is a glare-reducing matte black, with a matte gray cylinder.[6]
The S&W TRR8 and M&P R8 (both including accessory rails for mounting lights and lasers) are recent advances of the 327 line.Script error: No such module "Unsubst".
Current production
Smith & Wesson now include the Model 27 in two variations in their current "Classics" Line of Revolvers. Both feature original style wooden combat grips per the post WW2 versions of the 27 and later 586 and 686 revolvers. Barrels are currently available in 4" and <templatestyles src="Fraction/styles.css" />6+1⁄2"; both feature adjustable sights. The 4" version has a pinned serrated ramp—style front sight, the <templatestyles src="Fraction/styles.css" />6+1⁄2" version has a traditional target Patridge-style front sight that is also pinned to the barrel.
References
<templatestyles src="Reflist/styles.css" />
Script error: No such module "Check for unknown parameters".
- Script error: No such module "citation/CS1".