Radon–Nikodym theorem

From Wikipedia, the free encyclopedia
(Redirected from Radon-Nikodým theorem)
Jump to navigation Jump to search

Template:Short description In mathematics, the Radon–Nikodym theorem, named after Johann Radon and Otto M. Nikodym, is a result in measure theory that expresses the relationship between two measures defined on the same measurable space. A measure is a set function that assigns a consistent magnitude to the measurable subsets of a measurable space. Examples of a measure include area and volume, where the subsets are sets of points; or the probability of an event, which is a subset of possible outcomes within a wider probability space.

One way to derive a new measure from one already given is to assign a density to each point of the space, then integrate over the measurable subset of interest. This can be expressed as

ν(A)=Afdμ,

where ν is the new measure being defined for any measurable subset A and the function f is the density at a given point. The integral is with respect to an existing measure μ, which may often be the canonical Lebesgue measure on the real line or the n-dimensional Euclidean space n (corresponding to our standard notions of length, area and volume). For example, if f represented mass density and μ was the Lebesgue measure in three-dimensional space 3, then ν(A) would equal the total mass in a spatial region A.

The Radon–Nikodym theorem essentially states that, under certain conditions, any measure ν can be expressed in this way with respect to another measure μ on the same space. The function f is then called the Radon–Nikodym derivative and is denoted by dν/dμ.[1] An important application is in probability theory, leading to the probability density function of a random variable.

The theorem is named after Johann Radon, who proved the theorem for the special case where the underlying space is n in 1913, and for Otto Nikodym who proved the general case in 1930.[2] In 1936, Hans Freudenthal generalized the Radon–Nikodym theorem by proving the Freudenthal spectral theorem, a result in Riesz space theory; this contains the Radon–Nikodym theorem as a special case.[3]

A Banach space Y is said to have the Radon–Nikodym property if the generalization of the Radon–Nikodym theorem also holds (with the necessary adjustments made) for functions with values in Y. All Hilbert spaces have the Radon–Nikodym property.

Formal description

Radon–Nikodym theorem

The Radon–Nikodym theorem involves a measurable space (X,Σ) on which two σ-finite measures are defined, μ and ν. It states that, if νμ (that is, if ν is absolutely continuous with respect to μ), then there exists a Σ-measurable function f:X[0,), such that for any measurable set AΣ, ν(A)=Afdμ.

Radon–Nikodym derivative

The function f satisfying the above equality is Template:Em, that is, if g is another function which satisfies the same property, then f=g μ-almost everywhere. The function f is commonly written dν/dμ and is called the <templatestyles src="Template:Visible anchor/styles.css" />Radon–Nikodym derivative. The choice of notation and the name of the function reflects the fact that the function is analogous to a derivative in calculus in the sense that it describes the rate of change of density of one measure with respect to another (the way the Jacobian determinant is used in multivariable integration).

Extension to signed or complex measures

A similar theorem can be proven for signed and complex measures: namely, that if μ is a nonnegative σ-finite measure, and ν is a finite-valued signed or complex measure such that νμ, that is, ν is absolutely continuous with respect to μ, then there is a μ-integrable real- or complex-valued function g on X such that for every measurable set A, ν(A)=Agdμ.

Examples

In the following examples, the set X is the real interval [0,1], and Σ is the Borel sigma-algebra on X.

  1. Let μ be the length measure on X, and let ν assign to each subset Y of X twice the length of Y. Then dνdμ=2.
  2. Let μ be the length measure on X, and let ν assign to each subset Y of X the number of points from the set {0.1,,0.9} that are contained in Y. Then ν is not absolutely continuous with respect to μ since it assigns non-zero measure to zero-length points. Indeed, there is no derivative dνdμ: there is no finite function that, when integrated e.g. from (0.1ε) to (0.1+ε), gives 1 for all ε>0.
  3. μ=ν+δ0, where ν is the length measure on X and δ0 is the Dirac measure on 0 (it assigns a measure of 1 to any set containing 0 and a measure of 0 to any other set). Then, ν is absolutely continuous with respect to μ, and dνdμ=1X{0} – the derivative is 0 at x=0 and 1 at x>0.[4]

Properties

  • Let ν, μ, and λ be σ-finite measures on the same measurable space. If νλ and μλ (ν and μ are both absolutely continuous with respect to λ), then d(ν+μ)dλ=dνdλ+dμdλλ-almost everywhere.
  • If νμλ, then dνdλ=dνdμdμdλλ-almost everywhere.
  • In particular, if μν and νμ, then dμdν=(dνdμ)1ν-almost everywhere.
  • If μλ and Template:Mvar is a μ-integrable function, then Xgdμ=Xgdμdλdλ.
  • If ν is a finite signed or complex measure, then d|ν|dμ=|dνdμ|.

Applications

Probability theory

The theorem is very important in extending the ideas of probability theory from probability masses and probability densities defined over real numbers to probability measures defined over arbitrary sets. It tells if and how it is possible to change from one probability measure to another. Specifically, the probability density function of a random variable is the Radon–Nikodym derivative of the induced measure with respect to some base measure (usually the Lebesgue measure for continuous random variables).

For example, it can be used to prove the existence of conditional expectation for probability measures. The latter itself is a key concept in probability theory, as conditional probability is just a special case of it.

Financial mathematics

Amongst other fields, financial mathematics uses the theorem extensively, in particular via the Girsanov theorem. Such changes of probability measure are the cornerstone of the rational pricing of derivatives and are used for converting actual probabilities into those of the risk neutral probabilities.

Information divergences

If μ and ν are measures over Template:Mvar, and μν

  • The Kullback–Leibler divergence from ν to μ is defined to be DKL(μν)=Xlog(dμdν)dμ.
  • For α > 0, α ≠ 1 the Rényi divergence of order α from ν to μ is defined to be Dα(μν)=1α1log(X(dμdν)α1dμ).

The assumption of σ-finiteness

The Radon–Nikodym theorem above makes the assumption that the measure μ with respect to which one computes the rate of change of ν is σ-finite.

Negative example

Here is an example when μ is not σ-finite and the Radon–Nikodym theorem fails to hold.

Consider the Borel σ-algebra on the real line. Let the counting measure, Template:Mvar, of a Borel set Template:Mvar be defined as the number of elements of Template:Mvar if Template:Mvar is finite, and Script error: No such module "Check for unknown parameters". otherwise. One can check that Template:Mvar is indeed a measure. It is not Template:Mvar-finite, as not every Borel set is at most the union of countably many finite sets. Let Template:Mvar be the usual Lebesgue measure on this Borel algebra. Then, Template:Mvar is absolutely continuous with respect to Template:Mvar, since for a set Template:Mvar one has μ(A) = 0Script error: No such module "Check for unknown parameters". only if Template:Mvar is the empty set, and then ν(A)Script error: No such module "Check for unknown parameters". is also zero.

Assume that the Radon–Nikodym theorem holds, that is, for some measurable function fScript error: No such module "Check for unknown parameters". one has

ν(A)=Afdμ

for all Borel sets. Taking Template:Mvar to be a singleton set, A = {a}Script error: No such module "Check for unknown parameters"., and using the above equality, one finds

0=f(a)

for all real numbers Template:Mvar. This implies that the function fScript error: No such module "Check for unknown parameters"., and therefore the Lebesgue measure Template:Mvar, is zero, which is a contradiction.

Positive result

Assuming νμ, the Radon–Nikodym theorem also holds if μ is localizable and ν is accessible with respect to μ,[5]Template:Rp i.e., ν(A)=sup{ν(B):B𝒫(A)μpre(0)} for all AΣ.[6]Template:Rp[5]Template:Rp

Proof

This section gives a measure-theoretic proof of the theorem. There is also a functional-analytic proof, using Hilbert space methods, that was first given by von Neumann.

For finite measures Template:Mvar and Template:Mvar, the idea is to consider functions fScript error: No such module "Check for unknown parameters". with f dμScript error: No such module "Check for unknown parameters".. The supremum of all such functions, along with the monotone convergence theorem, then furnishes the Radon–Nikodym derivative. The fact that the remaining part of Template:Mvar is singular with respect to Template:Mvar follows from a technical fact about finite measures. Once the result is established for finite measures, extending to Template:Mvar-finite, signed, and complex measures can be done naturally. The details are given below.

For finite measures

Constructing an extended-valued candidate First, suppose Template:Mvar and Template:Mvar are both finite-valued nonnegative measures. Let Template:Mvar be the set of those extended-value measurable functions f  : X → [0, ∞]Script error: No such module "Check for unknown parameters". such that:

AΣ:Afdμν(A)

F ≠ ∅Script error: No such module "Check for unknown parameters"., since it contains at least the zero function. Now let f1,  f2FScript error: No such module "Check for unknown parameters"., and suppose Template:Mvar is an arbitrary measurable set, and define:

A1={xA:f1(x)>f2(x)},A2={xA:f2(x)f1(x)}.

Then one has

Amax{f1,f2}dμ=A1f1dμ+A2f2dμν(A1)+ν(A2)=ν(A),

and therefore, max{ f1,  f2} ∈ FScript error: No such module "Check for unknown parameters"..

Now, let Template:MsetScript error: No such module "Check for unknown parameters". be a sequence of functions in Template:Mvar such that

limnXfndμ=supfFXfdμ.

By replacing fnScript error: No such module "Check for unknown parameters". with the maximum of the first Template:Mvar functions, one can assume that the sequence Template:MsetScript error: No such module "Check for unknown parameters". is increasing. Let Template:Mvar be an extended-valued function defined as

g(x):=limnfn(x).

By Lebesgue's monotone convergence theorem, one has

limnAfndμ=Alimnfn(x)dμ(x)=Agdμν(A)

for each A ∈ ΣScript error: No such module "Check for unknown parameters"., and hence, gFScript error: No such module "Check for unknown parameters".. Also, by the construction of Template:Mvar,

Xgdμ=supfFXfdμ.

Proving equality Now, since gFScript error: No such module "Check for unknown parameters".,

ν0(A):=ν(A)Agdμ

defines a nonnegative measure on ΣScript error: No such module "Check for unknown parameters".. To prove equality, we show that ν0 = 0Script error: No such module "Check for unknown parameters"..

Suppose ν0 ≠ 0Script error: No such module "Check for unknown parameters".; then, since Template:Mvar is finite, there is an ε > 0Script error: No such module "Check for unknown parameters". such that ν0(X) > ε μ(X)Script error: No such module "Check for unknown parameters".. To derive a contradiction from ν0 ≠ 0Script error: No such module "Check for unknown parameters"., we look for a positive set P ∈ ΣScript error: No such module "Check for unknown parameters". for the signed measure ν0ε μScript error: No such module "Check for unknown parameters". (i.e. a measurable set Template:Mvar, all of whose measurable subsets have non-negative ν0 − εμScript error: No such module "Check for unknown parameters". measure), where also Template:Mvar has positive Template:Mvar-measure. Conceptually, we're looking for a set Template:Mvar, where ν0ε μScript error: No such module "Check for unknown parameters". in every part of Template:Mvar. A convenient approach is to use the Hahn decomposition (P, N)Script error: No such module "Check for unknown parameters". for the signed measure ν0ε μScript error: No such module "Check for unknown parameters"..

Note then that for every A ∈ ΣScript error: No such module "Check for unknown parameters". one has ν0(AP) ≥ ε μ(AP)Script error: No such module "Check for unknown parameters"., and hence,

ν(A)=Agdμ+ν0(A)Agdμ+ν0(AP)Agdμ+εμ(AP)=A(g+ε1P)dμ,

where 1PScript error: No such module "Check for unknown parameters". is the indicator function of Template:Mvar. Also, note that μ(P) > 0Script error: No such module "Check for unknown parameters". as desired; for if μ(P) = 0Script error: No such module "Check for unknown parameters"., then (since Template:Mvar is absolutely continuous in relation to Template:Mvar) ν0(P) ≤ ν(P) = 0Script error: No such module "Check for unknown parameters"., so ν0(P) = 0Script error: No such module "Check for unknown parameters". and

ν0(X)εμ(X)=(ν0εμ)(N)0,

contradicting the fact that ν0(X) > εμ(X)Script error: No such module "Check for unknown parameters"..

Then, since also

X(g+ε1P)dμν(X)<+,

g + ε 1PFScript error: No such module "Check for unknown parameters". and satisfies

X(g+ε1P)dμ>Xgdμ=supfFXfdμ.

This is impossible because it violates the definition of a supremum; therefore, the initial assumption that ν0 ≠ 0Script error: No such module "Check for unknown parameters". must be false. Hence, ν0 = 0Script error: No such module "Check for unknown parameters"., as desired.

Restricting to finite values Now, since Template:Mvar is Template:Mvar-integrable, the set Template:MsetScript error: No such module "Check for unknown parameters". is Template:Mvar-null. Therefore, if a fScript error: No such module "Check for unknown parameters". is defined as

f(x)={g(x)if g(x)<0otherwise,

then fScript error: No such module "Check for unknown parameters". has the desired properties.

Uniqueness As for the uniqueness, let f, g : X → [0, ∞)Script error: No such module "Check for unknown parameters". be measurable functions satisfying

ν(A)=Afdμ=Agdμ

for every measurable set Template:Mvar. Then, gfScript error: No such module "Check for unknown parameters". is Template:Mvar-integrable, and

A(gf)dμ=0. (Recall that we can split the integral into two as long as they are measurable and non-negative)

In particular, for A = {xX : f(x) > g(x)},Script error: No such module "Check for unknown parameters". or Template:MsetScript error: No such module "Check for unknown parameters".. It follows that

X(gf)+dμ=0=X(gf)dμ,

and so, that (gf )+ = 0Script error: No such module "Check for unknown parameters". Template:Mvar-almost everywhere; the same is true for (gf )Script error: No such module "Check for unknown parameters"., and thus, f = gScript error: No such module "Check for unknown parameters". Template:Mvar-almost everywhere, as desired.

For Template:Mvar-finite positive measures

If Template:Mvar and Template:Mvar are Template:Mvar-finite, then Template:Mvar can be written as the union of a sequence {Bn}nScript error: No such module "Check for unknown parameters". of disjoint sets in ΣScript error: No such module "Check for unknown parameters"., each of which has finite measure under both Template:Mvar and Template:Mvar. For each Template:Mvar, by the finite case, there is a ΣScript error: No such module "Check for unknown parameters".-measurable function fn  : Bn → [0, ∞)Script error: No such module "Check for unknown parameters". such that

νn(A)=Afndμ

for each ΣScript error: No such module "Check for unknown parameters".-measurable subset Template:Mvar of BnScript error: No such module "Check for unknown parameters".. The sum (nfn1Bn):=f of those functions is then the required function such that ν(A)=Afdμ.

As for the uniqueness, since each of the fnScript error: No such module "Check for unknown parameters". is Template:Mvar-almost everywhere unique, so is fScript error: No such module "Check for unknown parameters"..

For signed and complex measures

If Template:Mvar is a Template:Mvar-finite signed measure, then it can be Hahn–Jordan decomposed as ν = ν+νScript error: No such module "Check for unknown parameters". where one of the measures is finite. Applying the previous result to those two measures, one obtains two functions, g, h : X → [0, ∞)Script error: No such module "Check for unknown parameters"., satisfying the Radon–Nikodym theorem for ν+Script error: No such module "Check for unknown parameters". and νScript error: No such module "Check for unknown parameters". respectively, at least one of which is Template:Mvar-integrable (i.e., its integral with respect to Template:Mvar is finite). It is clear then that f = ghScript error: No such module "Check for unknown parameters". satisfies the required properties, including uniqueness, since both Template:Mvar and Template:Mvar are unique up to Template:Mvar-almost everywhere equality.

If Template:Mvar is a complex measure, it can be decomposed as ν = ν1 + 2Script error: No such module "Check for unknown parameters"., where both ν1Script error: No such module "Check for unknown parameters". and ν2Script error: No such module "Check for unknown parameters". are finite-valued signed measures. Applying the above argument, one obtains two functions, g, h : X → [0, ∞)Script error: No such module "Check for unknown parameters"., satisfying the required properties for ν1Script error: No such module "Check for unknown parameters". and ν2Script error: No such module "Check for unknown parameters"., respectively. Clearly, f = g + ihScript error: No such module "Check for unknown parameters". is the required function.

The Lebesgue decomposition theorem

Lebesgue's decomposition theorem shows that the assumptions of the Radon–Nikodym theorem can be found even in a situation which is seemingly more general. Consider a σ-finite positive measure μ on the measure space (X,Σ) and a σ-finite signed measure ν on Σ, without assuming any absolute continuity. Then there exist unique signed measures νa and νs on Σ such that ν=νa+νs, νaμ, and νsμ. The Radon–Nikodym theorem can then be applied to the pair νa,μ.

See also

Notes

<templatestyles src="Reflist/styles.css" />

  1. Script error: No such module "citation/CS1".
  2. Script error: No such module "Citation/CS1".
  3. Script error: No such module "citation/CS1".
  4. Script error: No such module "citation/CS1".
  5. a b Script error: No such module "citation/CS1".
  6. Script error: No such module "citation/CS1".

Script error: No such module "Check for unknown parameters".

References

  • Script error: No such module "citation/CS1". Contains a proof for vector measures assuming values in a Banach space.
  • Script error: No such module "citation/CS1". Contains a lucid proof in case the measure ν is not σ-finite.
  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1". Contains a proof of the generalisation.
  • Script error: No such module "citation/CS1".

This article incorporates material from Radon–Nikodym theorem on PlanetMath, which is licensed under the Creative Commons Attribution/Share-Alike License.

Template:Measure theory