Klimov M-105
The Klimov M-105 was a V12 liquid-cooled piston aircraft engine used by Soviet aircraft during World War II.[1]
Development
The M-105, designed in 1940, drew heavily on Klimov's experience with the Hispano-Suiza 12Y (license-built as the M-100). In addition to a two-speed supercharger, the M-105 had several improvements like two intake valves per cylinder and a counterbalanced crankshaft. The M-105 was the first Klimov V-12 engine design to use reverse-flow cylinder heads, forcing the induction system to be placed on the outside of the cylinder banks, with the exhaust system also exiting from the outboard side, with twin sets of "siamesed" exhaust ports adjacent to each other. About 129,000 M-105 and its variants were built.
During the war, Klimov's engines were redesignated from "M" (for "motor," engine) to "VK" for the lead designer's initials.
Variants
- M-105 - (Template:Convert) First version produced at the end of 1939. Installed on some pre-war fighters.
- M-105P - (Template:Convert) First mass production engine (1940). Able to accept a motornaya pushka (моторная пушка - motor cannon)-mount autocannon in the "vee" between cylinder banks. Installed on the majority Soviet pre-war fighters - Yak-1, LaGG-1 and several experimental aircraft.
- M-105PA - (Template:Convert) Improved 1941 version.
- M-105PF (VK-105PF) - (Template:Convert) 1942 Modification with significantly increased power output at the expense of decreased critical altitude (high-altitude performance remained the same). In spite of Klimov's concerns about decreased service life, the engine was pressed into production at the insistence of Yakovlev, and further exploitation of "PF" version showed this was the right decision. The "PF" was installed on the most numerous versions of "Yak" fighters - Yak-1B, Yak-7B, Yak-9.
- VK-105PF2 & PF3 - (1,300 to 1,360 horsepower (970 to 1,015 kW)) Further increase in power output, which was believed to have exhausted the potential of the M-105 design for greater performance. The "PF2" was installed in the Yak-3 and Yak-9U.
- M-105PD - (Template:Convert) Engine with 2-stage E-100 turbocharger, experimental high-altitude version, unsuccessful prototype.
- M-105R - (Template:Convert) Decreased propeller reduction gear ratio for bomber aircraft. Installed on Pe-2, BB-22 (Yak-4) and others.
- M-105RA - (Template:Convert) M-105PA with decreased propeller reduction gear ratio for bomber aircraft.
Applications
Specifications (VK-105)
Data from [2]
General characteristics
- Type: Twelve-cylinder liquid-cooled 60° V12 engine
- Bore: 148mm (5.826 in)
- Stroke: 170mm (6.693 in)
- Displacement: 35.101 L (2,142.2 cu in)
- Length: 2,027 mm (79.8 in)
- Width: 777 mm (30.59 in)
- Height: 945 mm (37.20 in)
- Dry weight: 575 kg (1,266 lb)
Components
- Valvetrain: Two intake valves and one sodium-filled exhaust valve per cylinder actuated via a single overhead camshaft per bank.
- Supercharger: Gear-driven two-speed centrifugal type compressor. Gear ratios: 7.78:1 (1st speed) 11.0:1 (2nd speed). Maximum boost for take-off: Template:Cvt. Maximum boost at altitude: Template:Cvt. Emergency boost (maximum 2 minutes): Template:Cvt at 2,800 rpm. Critical altitude: Template:Cvt at 1st speed, Template:Cvt at 2nd speed.
- Fuel system: Six K-105 carburettors (License copy of Solex-Hispano 56SVC self-adjusted carburettor), three on each outboard side of cylinder banks
- Fuel type: 94 (minimum grade), 95 or 100 octane rating gasoline.[3]
- Cooling system: Liquid-cooled
- Reduction gear: 1: 0.666 (1: 0.591 for M-105R)
Performance
- Power output:
- Template:Cvt at 2,700 rpm for take-off, boost rated at Template:Cvt
- Template:Cvt at 2,700 rpm at Template:Cvt, boost rated at Template:Cvt Template:Cvt
- Template:Cvt at 2,700 rpm at Template:Cvt
- Specific power: 23.36 kW/L (0.513 hp/in³)
- Compression ratio: 7.0:1
- Specific fuel consumption: 328 g/(kW•h) (0.54 lb/(hp•h))
- Oil consumption: 11 g/(kW•h) (0.28 oz/(hp•h))
- Power-to-weight ratio: 1.42 kW/kg (0.86 hp/lb)
See also
Related development
Comparable engines
Related lists
References
Notes
Bibliography
- Script error: No such module "citation/CS1".
- Script error: No such module "citation/CS1".