Joyce–Collingwood station

From Wikipedia, the free encyclopedia
(Redirected from Joyce Station)
Jump to navigation Jump to search

Template:Short description Script error: No such module "Infobox".Template:Template otherScript error: No such module "Parameter validation".Script error: No such module "Check for unknown parameters".Script error: No such module "check for deprecated parameters".

File:Joyce–Collingwood platform level (20190626 121203).jpg
Platform level

Joyce–Collingwood (formerly Joyce) is an elevated station on the Expo Line, a part of Metro Vancouver's SkyTrain rapid transit system. The station is located on Joyce Street at Vanness Avenue, in the Renfrew–Collingwood neighbourhood of Vancouver, British Columbia, Canada.

History

The station was designed by the Austrian architecture firm Architektengruppe U-Bahn[1][2] and opened in 1985 as "Joyce station" on the original Expo Line. It replaced Joyce Loop, located Script error: No such module "convert". south at the intersection of Joyce Street and Kingsway, as the main transfer point for local transit services in the area. Trolley wires were extended to the station in early 1986 to bring trolley buses to the station's bus loop.[3]

The station is located on the former right-of-way once used by the British Columbia Electric Railway's Central Park Line; this line ran from just west of Nanaimo station to where New Westminster station is located.

Formerly an industrial area, the immediate vicinity of this station has since been redeveloped as Collingwood Village, a denser community of high-rise condominiums. The "Collingwood" portion of the name was added in 2001 in an attempt to reflect the positive impact of SkyTrain on the surrounding community.

As part of Expo Line upgrades, renovations on the station began in early 2016.[4] Phase one of the project was completed on October 6, 2017; it included a replacement of the existing elevator, the installation of two new escalators at the east end of the platform to replace the original single one, and the improvement of the station design and integration with the surrounding community.[5] Phase two renovations began in early 2018 and were completed on June 15, 2019.[4][6]

Services

Station information

Entrances

File:Joyce–Collingwood station (20190626 120029).jpg
Bus loop and east stationhouse
  • West entrance Disabled access: located on the west side of Joyce Street, in the centre of the bus loop. The entrance is fully accessible with an elevator and an up escalator.[8]
  • East entrance Disabled access: located on the east side of Joyce Street, on the opposite side of the bus loop. The entrance is also fully accessible, including up and down escalators, an elevator, and a staircase. This entrance serves the passenger drop-off area.[8]

Transit connections

Script error: No such module "Labelled list hatnote".

Joyce–Collingwood station provides a partial off-street transit exchange at the intersection of Joyce Street and Vanness Avenue. Bus bay assignments are as follows:[9]

Bay Route Destination Notes
1 Unloading only
2 28 Phibbs Exchange
3 HandyDART
4 R4 41st Ave RapidBus service to UBC Exchange
5 41 Crown Trolley bus service
6 26 29th Avenue Station
7 27 Kootenay Loop

References

Template:Sister project

<templatestyles src="Reflist/styles.css" />

  1. Script error: No such module "citation/CS1".
  2. Script error: No such module "citation/CS1".
  3. Script error: No such module "citation/CS1".
  4. a b Script error: No such module "citation/CS1".
  5. Script error: No such module "citation/CS1".
  6. Script error: No such module "citation/CS1".
  7. Script error: No such module "citation/CS1".
  8. a b Script error: No such module "Citation/CS1".
  9. Script error: No such module "Citation/CS1".

Script error: No such module "Check for unknown parameters".

Template:TransLink Services