SBB RABDe 500

From Wikipedia, the free encyclopedia
(Redirected from ICN (SBB))
Jump to navigation Jump to search

Template:Use dmy dates Template:Short description Template:Infobox train

File:ICN1.jpg
ICN Double Set (Robert Walser facing buffers) stationed at Template:Rws Platform 10

The SBB RABDe 500, also known as the ICN,Template:Efn is a Swiss high speed passenger EMU, which was introduced in 2000, in time for Expo.02 held in western Switzerland in 2002. Its maximum speed is Template:Convert, and it employs tilting technology, which allows it to travel through curvy routes faster than non-tilting trains. The train sets were a joint development by Bombardier, Swiss Federal Railways and Alstom, with an aerodynamic body designed by Pininfarina, bogies and tilting mechanism designed by the then SIG, Schweizerische Industrie Gesellschaft.

Forty-four RABDe 500 trains with a total of 308 coaches were delivered to SBB-CFF-FFS between 1999 and 2005. The RABDe 500 often run with two complete compositions, each with seven carriages and a seating capacity of 480,[1] both including a dining car. The outer four of the seven carriages are second class.

History

Swiss Federal Railways ordered an initial 24 7-car trainsets in 1996 at a cost of Template:CHF. The contract went to a consortium including Adtranz, Template:Ill, and Fiat-SIG.[2] Pininfarina designed the vehicle body.[3] The trains were intended for use on the Jura Foot Line; adopting tilting technology allowed SBB to defer track upgrades over the route.[4]

The first trainsets entered service on the 28 May 2000 timetable change, running from St. Gallen via Winterthur, Zürich and Biel/Bienne to Lausanne.[5] All 24 trainsets were in service by the opening of the Expo.02 national exposition in May 2002. The trains all carried the slogan "enable the future" (Template:Langx).[6]

SBB ordered another 10 trainsets, with an option for 10 more, in June 2001. SBB exercised the option that December, for a total of 20 additional transets at Template:CHF.[7][8] Delivery was complete by 2005.[9]

Formerly, SBB designated intercity services operated by the SBB RABDe 500 as "ICN", differentiating them from other InterCity (IC) and InterRegio (IR) services. This practice ceased with the December 2017 timetable changes, in which all IC and IR services gained numbers and the ICN category was eliminated.[10] RABDe 500-operated services are indicated on timetables and mobile applications by the "TT" label.[11]

All 44 trainsets were refurbished between 2012 and 2019, an overhaul taking 25 days per train.[12] Another overhaul, taking place between 2021 and 2029, will replace the interiors and improve mobile phone reception.[13]

Template:As of the RABDe 500 is primarily used on two InterCity routes and one InterRegio route: the IC 5, running from Template:Rws to Template:Rws or Zürich HB; the IC 51, running from Template:Rws to Template:Rws; and the IR 57 running from Template:Rws to Template:Rws.[14]

Design

Each formation is composed of seven cars. The first two and last two cars in the trainset are the second class cars, and have the traction motors and powered axles. The three middle cars carry first class seating; the third car is split between first class and the restaurant car.[9] The formation is Template:Convert long and weighs Template:Convert. The car body is a monocoque design built out of aluminium.[3]

The RABDe 500 can tilt at a maximum of 8 degrees.[5] Eight Template:Convert traction motors produce Template:Convert; the train can travel at a maximum speed of Template:Convert.[9] On routes with a significant number of curves, the tilting technology could reduce travel times by 10–20%.[15] For example, on the Template:Rws–Template:Rws route, the introduction of the trains shortened travel times by 15 minutes.[5]

In 2015–2016, eighteen trainsets were adapted for operation in the Gotthard Base Tunnel. Changes included improved fire detection equipment, cab signaling upgrades, and improvements to heating and cooling.[15] This was a temporary measure until newer non-tilting trains SBB RABe 501 (Giruno) trains became available.[16]

Naming

All forty-four RABDe 500 trains are named, mostly after famous Swiss scholars, artists, writers, politicians, engineers, and architects. Each train bears the portrait of its namesake, painted by Bernese painter Martin Fivian, in the third car (first class and restaurant).[17]

List of names:[9]

Template:Div col

Template:Div col end

See also

Script error: No such module "Portal".

Notes

Template:Notelist

References

Template:Reflist

Further reading

External links

Template:Sister project

Template:High-speed rail

  1. ↑ Script error: No such module "citation/CS1".
  2. ↑ Script error: No such module "citation/CS1".
  3. ↑ a b Script error: No such module "citation/CS1".
  4. ↑ Script error: No such module "citation/CS1".
  5. ↑ a b c Script error: No such module "citation/CS1".
  6. ↑ Script error: No such module "citation/CS1".
  7. ↑ Script error: No such module "citation/CS1".
  8. ↑ Script error: No such module "citation/CS1".
  9. ↑ a b c d Cite error: Invalid <ref> tag; no text was provided for refs named platform5
  10. ↑ Script error: No such module "citation/CS1".
  11. ↑ Script error: No such module "citation/CS1".
  12. ↑ Script error: No such module "citation/CS1".
  13. ↑ Script error: No such module "citation/CS1".
  14. ↑ Script error: No such module "citation/CS1".
  15. ↑ a b Script error: No such module "citation/CS1".
  16. ↑ Script error: No such module "citation/CS1".
  17. ↑ Script error: No such module "citation/CS1".
Retrieved from "http://debianws.lexgopc.com/wiki143/index.php?title=SBB_RABDe_500&oldid=848996"