HMAS Otway (S 59)
Template:Short description Script error: No such module "Other uses". Template:Use Australian English Template:Use dmy dates
| Script error: No such module "InfoboxImage". The casing and fin of HMAS Otway, at Holbrook, New South Wales Script error: No such module "Check for unknown parameters".
Script error: No such module "WPSHIPS utilities". Script error: No such module "WPSHIPS utilities". |
HMAS Otway (S 59) was an Script error: No such module "WPSHIPS utilities". of the Royal Australian Navy (RAN). One of the first four Oberon-class boats ordered for the RAN, Otway was built in Scotland during the mid-1960s, and commissioned into naval service in 1968. The submarine was decommissioned in 1994. The submarine's upper casing, fin, and stern are preserved at Holbrook, New South Wales.
Design and construction
Script error: No such module "Labelled list hatnote". The Oberon class was based heavily on the preceding Porpoise class of submarines, with changes made to improve the vessels' hull integrity, sensor systems, and stealth capabilities.[1] Eight submarines were ordered for the RAN, in two batches of four.[2] The first batch (including Otway) was approved in 1963, and the second batch was approved during the late 1960s, although two of these were cancelled before construction started in 1969, with the funding redirected to the Fleet Air Arm.[3][4] This was the fourth time the RAN had attempted to establish a submarine branch.[5]
The submarine was Script error: No such module "convert". long, with a beam of Script error: No such module "convert"., and a draught of Script error: No such module "convert". when surfaced.[6] At full load displacement, she displaced 2,030 tons when surfaced, and 2,410 tons when submerged.[6] The two propeller shafts were each driven by an English Electric motor providing Script error: No such module "convert". and Script error: No such module "convert".; the electricity for these was generated by two Admiralty Standard Range supercharged V16 diesel generators.[7] The submarine could travel at up to Script error: No such module "convert". on the surface, and up to Script error: No such module "convert". when submerged, had a maximum range of Script error: No such module "convert". at Script error: No such module "convert"., and a test depth of Script error: No such module "convert"..[6][7] When launched, the boat had a company of 8 officers and 56 sailors, but by the time she decommissioned, the number of sailors had increased to 60.[6][7] In addition, up to 16 trainees could be carried.[7]
The main armament of the Oberons consisted of six Script error: No such module "convert". torpedo tubes.[1] The British Mark 8 torpedo was initially carried by the submarine; this was later replaced by the wire-guided Mark 23.[8] Between 1977 and 1985,Script error: No such module "Unsubst". the Australian Oberons were upgraded to carry United States Navy Mark 48 torpedoes and UGM-84 Sub Harpoon anti-ship missiles.[5][9] As of 1996, the standard payload of an Australian Oberon was a mix of 20 Mark 48 Mod 4 torpedoes and Sub Harpoon missiles.[6] Some or all of the torpedo payload could be replaced by Mark 5 Stonefish sea mines, which were deployed through the torpedo tubes.[8] On entering service, two stern-mounted, short-length Script error: No such module "convert". torpedo tubes for Mark 20 anti-submarine torpedoes.[10] However, the development of steerable wire-guided torpedoes made the less-capable aft-firing torpedoes redundant; they were closed off, and later removed during a refit.[10]
Otway was laid down by Scotts Shipbuilding and Engineering Company at Greenock, Scotland on 29 June 1965,[9] The submarine was launched on 29 November 1966 by Princess Marina: the first RAN submarine and second RAN vessel after the cruiser Script error: No such module "WPSHIPS utilities". to be launched by a member of the Royal Family.[11] In January 1968, RAN personnel sent to Scotland to train before the submarine was completed provided assistance to residents whose houses were destroyed in a storm.[12] Otway was commissioned into the RAN on 23 April 1968.[9]
Operational history
Otway arrived in Australian waters in September 1968 after sailing from the United Kingdom via ports in Africa.[12] During this voyage, the boat became the first RAN vessel to visit Ghana, and the first RAN submarine to round the Cape of Good Hope.[13]
On 10 January 1969, the submarine escorted Script error: No such module "WPSHIPS utilities"., the last submarine of the Royal Navy's Australia-based 4th Submarine Squadron out of Sydney Harbour.[12]
During 1970, the submarine visited New Zealand and was involved in training exercises in the Indian Ocean.[13]
In March and April 1971, Otway participated in SEATO Exercise Subok.[13] On 26 August 1971, OtwayTemplate:'s fin was struck by a dummy helicopter-dropped torpedo during training exercises in Jervis Bay.[13] There was only superficial damage to the submarine, which was quickly repaired.[13] On 1 September, the fin was damaged again when a periscope mast was hit by a whale: repairs were completed in Sydney that day.[13] In October, the submarine visited Brisbane for Navy Week, but was forced to sail on short notice and with only two-thirds of her personnel to locate and rescue the crew of the ketch One and All, which had run aground on Middleton Reef.[13]
Decommissioning and fate
HMAS Otway paid off on 17 February 1994.Script error: No such module "Unsubst". The submarine's fin was donated to the town of Holbrook, New South Wales, an inland community with strong ties to submarines since World War I, when the town was renamed after British submariner and Victoria Cross recipient Norman Douglas Holbrook.[14] The community decided to tender for the purchase of the rest of the submarine, but despite fundraising efforts and a large donation from Holbrook's widow, the town did not win the tender.[14] The submarine was sold to Sims Metal for scrapping in November 1995.Script error: No such module "Unsubst". Undeterred, the working group created for the tendering process instead used the money raised to buy the upper section of the casing - everything above the waterline when surfaced[14] - plus the submarine's tail section, from Sims Metal.Script error: No such module "Unsubst".
The casing was sectioned, transported down the Hume Highway on semi-trailers, then reassembled on site with the help of unemployed trainees on a work for the dole scheme.[14] Otway was dedicated as a submarine memorial on 7 June 1997.[14] The Holbrook Submarine Museum was laterScript error: No such module "Unsubst". established nearby.[14]
In 2013, the fin was fitted with periscopes and masts of the type fitted to Otway while in service.[15]
Citations
<templatestyles src="Reflist/styles.css" />
- ↑ a b Chant, A Compedium of Armaments and Military Hardware, pp. 167–8
- ↑ Cooper, in Stevens, The Royal Australian Navy, p. 188
- ↑ Cooper, in Stevens, The Royal Australian Navy, p. 194
- ↑ Bastock, Australia's Ships of War, p. 366
- ↑ a b Dennis et al., The Oxford Companion to Australian Military history, p. 399
- ↑ a b c d e Sharpe (ed.), Jane's Fighting Ships, 1996–1997, p. 23
- ↑ a b c d Shaw, HMAS Onslow, p. 15
- ↑ a b Shaw, HMAS Onslow, p. 21
- ↑ a b c Sharpe (ed.), Jane's Fighting Ships 1992–93, p. 22
- ↑ a b Shaw, HMAS Onslow, p. 19
- ↑ Bastock, Australia's Ships of War, pp. 367–368
- ↑ a b c Bastock, Australia's Ships of War, p. 367
- ↑ a b c d e f g BAstock, Australia's Ships of War, p. 368
- ↑ a b c d e f Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
Script error: No such module "Check for unknown parameters".
References
- Script error: No such module "citation/CS1".
- Script error: No such module "citation/CS1".
- Script error: No such module "citation/CS1".
- Script error: No such module "citation/CS1".
- Script error: No such module "citation/CS1".
- Script error: No such module "citation/CS1".
External links
Script error: No such module "Military navigation". Script error: No such module "Military navigation".
Script error: No such module "Coordinates".