Francesco Caracciolo-class battleship

Francesco Caracciolo class

Right-elevation drawing of the Francesco Caracciolo class

The Francesco Caracciolo-class battleships were a group of four super-dreadnought battleships designed for the (Royal Italian Navy) in 1913 and ordered in 1914. The first ship of the class, Francesco Caracciolo, was laid down in late 1914; the other three ships, Cristoforo Colombo, Marcantonio Colonna, and Francesco Morosini followed in 1915. Armed with a main battery of eight [[Cannone navale da 381/40|Template:Cvt guns]] and possessing a top speed of , the four ships were intended to be the equivalent of the fast battleships like the British .

The class was never completed due to material shortages and shifting construction priorities after the outbreak of World War I in 1914. Only the lead ship was launched in 1920, and several proposals to convert her into an aircraft carrier were considered, but budgetary problems prevented any work being done. She was sold to an Italian shipping firm for conversion into a merchant ship, but this also proved to be too expensive, and she was broken up for scrap beginning in 1926.

Design

In 1913, Admiral Paolo Thaon di Revel became the Chief of Staff of the (Royal Italian Navy). With tensions high in Europe and a naval arms race underway, he secured authorization for a huge new construction program, which called for four new battleships, three cruisers, and numerous other warships. Ordered in 1914, the Francesco Caracciolo class was the first type of super-dreadnought battleship designed by the . They were intended to match the new fast battleships being built in foreign navies, such as the British . Rear Admiral Edgardo Ferrati was responsible for preparing the designs. Ferrati originally called for a ship armed with twelve 381-millimeter guns and twenty secondary guns, but by the time he had finalized the design, he had reduced the main battery to eight guns and the secondary battery to twelve guns.

Characteristics

File:Francesco Caracciolo-class line drawing.jpg

Line-drawing of the Francesco Caracciolo class; note incorrect aspects such as the single mast and ram bow

The Francesco Caracciolo class was long at the waterline and long overall. The ships had a beam of and a draft of . They would have displaced at normal loading and up to at full load. They were to be equipped with two tripod masts.

The ships were to be powered by four Parsons steam turbines, each driving one shaft, using steam provided by twenty oil-fired Yarrow boilers. The boilers were trunked into two large funnels. The turbines were rated at , which was intended to provide a top speed of . At a more economical speed of , the ships were estimated to have a range of .

Francesco Caracciolo and her sisters were to be armed with a main battery of eight 40-caliber Cannone navale da 381/40 guns in four twin gun turrets, all mounted on the centerline in superfiring pairs fore and aft of the superstructure. The guns fired projectiles at a muzzle velocity of to a range of . The secondary armament of the ships would have consisted of a dozen 50-caliber Cannone navale da 152/50 (6 in) guns mounted in casemates clustered amidships. Their projectiles had a muzzle velocity of . Anti-aircraft (AA) defense was to be provided by eight 45-caliber Cannone da 102/45 (4 in) guns and a dozen guns. The 102 mm guns fired a shell at a muzzle velocity of . As was typical for capital ships of the period, the ships of the Francesco Caracciolo class were to be armed with eight torpedo tubes, either or in diameter.

Armor for the class consisted of Krupp cemented steel manufactured by Terni. The main belt armor was thick; horizontal protection consisted of a thick deck. The main conning tower had thick sides. The same level of protection was applied to the main battery turrets, while the secondary guns had of armor protection.

Ships

Construction data

Ship	Namesake	Builder	Laid down	Launched	Fate
Francesco Caracciolo	Francesco Caracciolo	Regio Cantiere di Castellammare di Stabia, Naples-Castellammare di Stabia	16 October 1914	12 May 1920	Cancelled, 2 January 1921
Marcantonio Colonna	Marcantonio Colonna	Cantieri navali Odero, Genoa-Sestri Ponente	3 March 1915	Never
Cristoforo Colombo	Cristoforo Colombo	Ansaldo, Genoa	14 March 1915
Francesco Morosini	Francesco Morosini	Cantiere navale fratelli Orlando, Livorno	27 June 1915

Construction

File:Italian battleship Francesco Caracciolo launching.jpg

Francesco Caracciolo is launched at the Royal Naval Yard, Castellamare di Stabia, on 12 May 1920. She was the only member of her class to be launched, but she was not completed.

Shortages of steel slowed the construction of the ships, and after Italy entered World War I in May 1915, other classes of warships, particularly destroyers, submarines, and other light craft were needed to combat the Central Powers. As a result, work on the ships was suspended in March 1916. Around of steel had been built into the hull for Francesco Caracciolo when work stopped. Cristoforo Colombo was the next furthest along, 12.5 percent of the hull being completed and 5 percent of the machinery assembled. Work on the last two ships had not progressed significantly by the time work on them halted. Two of the heavy guns intended for Cristoforo Colombo were installed aboard the monitor . The monitor received a pair of 381 mm guns from Francesco Morosini, and the two and four s were also equipped with spare 381 mm guns. Four guns were converted into Cannone da 381/40 AVS railroad guns and others were emplaced as coast-defense guns.

Work resumed on Francesco Caracciolo in October 1919, but she was not to be completed. That year, the considered converting the ship into a flush-decked aircraft carrier similar to the British . The poor economic situation in Italy in the aftermath of World War I and the heavy expenses of the Italian pacification campaigns in Libya forced severe reductions in the naval budget. As a result, a modern carrier conversion could not be completed. The Ansaldo shipyard proposed converting Francesco Caracciolo into a floatplane carrier, a cheaper alternative. It was nevertheless still too expensive for the .

As well as the budgetary problems, the senior Italian navy commanders could not agree on the shape of the post-war . One faction advocated a traditional surface battle fleet, while a second believed a fleet composed of aircraft carriers, torpedo boats, and submarines would be ideal. A third faction, led by Admiral Giovanni Sechi, argued that a balanced fleet with a core of battleships and carriers was the most flexible option. To secure budgetary space for new construction, Sechi drastically reduced the number of older ships in service; he also cancelled the battleships of the Francesco Caracciolo class. Francesco Caracciolo was sold on 25 October 1920 to the shipping company. The firm planned to convert her into a merchant ship, but the work was deemed too expensive, and so she was temporarily mothballed in Baia Bay outside Naples.

By this time, the had returned to the idea of converting the ship into an aircraft carrier. In the ongoing negotiations at the Washington Naval Conference, the proposed tonnage limit for the was to be , which was now to include a converted Francesco Caracciolo and two new, purpose-built ships. A new conversion design, featuring an island superstructure, was prepared for Francesco Caracciolo but Italy's chronic budgetary problems prevented the navy building any of these ships. Francesco Caracciolo was subsequently broken up for scrap, starting in late 1926. The other three ships had been dismantled shortly after the war, with some of the machinery from Cristoforo Columbo used in the construction of the ocean liner .

External links

• Francesco Caracciolo Marina Militare website