format (command)

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

Template:Short description

Script error: No such module "Infobox".Template:Template other Script error: No such module "Check for unknown parameters".Script error: No such module "Check for conflicting parameters". In computing, format is a command-line utility that carries out disk formatting. It is a component of various operating systems, including 86-DOS, MS-DOS, IBM PC DOS and OS/2, Microsoft Windows and ReactOS.

Overview

The command performs the following actions by default on a floppy disk, hard disk drive, solid state (USB), or other magnetic medium (it will not perform these actions on optical media):

  1. clearing the FAT entries by changing them to Template:Mono
  2. clearing the FAT root directory by changing any values found to Template:Mono[nb 1][1][2][3]
  3. checking each cluster to see if it is good or bad and marking it as good or bad in the FAT

Any storage device must have its medium structured to be useful. This process is referred to as "creating a filesystem" in Unix, Linux, or BSD.[4] Under these systems different commands are used. The commands can create many kinds of file systems, including those used by DOS, Windows, and OS/2.

Implementations

File:IBM PC DOS 1.0 screenshot.png
FORMAT.COM, among several other commands, in IBM PC DOS 1.0.
File:CPM-86.png
FORMAT.CMD in CP/M-86

The command is also available in Intel ISIS-II,[5] iRMX 86,[6] MetaComCo TRIPOS,[7] AmigaDOS,[8] Zilog Z80-RIO,[9] Microware OS-9,[10] DR FlexOS,[11] TSL PC-MOS,[12] SpartaDOS X,[13] Datalight ROM-DOS,[14] IBM/Toshiba 4690 OS,[15] PTS-DOS,[16] SISNE plus,[17] and in the DEC RT-11[18] operating system.

Microsoft DOS and Windows

On MS-DOS, the command is available in versions 1 and later.[19]

Optionally (by adding the /S, for "system" switch), format can also install a Volume Boot Record. With this option, Format writes bootstrap code to the first sector of the volume (and possibly elsewhere as well). Format always writes a BIOS Parameter Block to the first sector, with or without the /S option.

Another option (/Q) allows for what Microsoft calls "Quick Format". With this option the command will not perform steps 2 and 3 above.Script error: No such module "Unsubst". Format /Q does not alter data previously written to the media.

Typing "format" with no parameters in MS-DOS 3.2 or earlier would automatically, without prompting the user, format the current drive; however in MS-DOS 3.3 and later it would simply produce the error: "required parameter missing".Script error: No such module "Unsubst".

DR/Novell DOS

DR DOS 6.0 includes an implementation of the format command.[20]

FreeDOS

The FreeDOS version was developed by Brian E. Reifsnyder and is licensed under the GPL.[21]

ReactOS

File:ReactOS-0.4.13 format command 667x514.png
The format command on ReactOS

The ReactOS implementation is based on a free clone developed by Mark Russinovich for Sysinternals in 1998. It is licensed under the GPL.[22] It was adapted to ReactOS by Emanuele Aliberti in 1999 and supports FAT, FAT32, FATX, EXT2, and BtrFS filesystems.

See also

Notes

  1. ↑ The directory entries get filled with 0x00 since MS-DOS 1.25 and PC DOS 2.0. If the Format command line option /O is provided, the first byte of each directory entry is set to 0xE5h to create a FAT format usable by PC DOS 1.0-1.1. However, not providing /O will significantly speed up directory searches under MS-DOS 1.25 and PC DOS 2.0 and higher. Older versions of MS-DOS, PC DOS, and 86-DOS only supported the 0xE5 marker.

References

<templatestyles src="Reflist/styles.css" />

  1. ↑ Script error: No such module "citation/CS1". (NB. While the publishers claim this would be MS-DOS 1.1 and 2.0, it actually is SCP MS-DOS 1.25 and a mixture of Altos MS-DOS 2.11 and TeleVideo PC DOS 2.11.)
  2. ↑ Script error: No such module "citation/CS1". (NB. While the author claims this would be MS-DOS 1.1 and 2.0, it actually is SCP MS-DOS 1.25 and a mixture of Altos MS-DOS 2.11 and TeleVideo PC DOS 2.11.)
  3. ↑ Script error: No such module "citation/CS1". (NB. While the author claims this would be MS-DOS 1.1 and 2.0, it actually is SCP MS-DOS 1.25 and a mixture of Altos MS-DOS 2.11 and TeleVideo PC DOS 2.11.)
  4. ↑ newfs(8): EXAMPLE section – FreeBSD System Manager's Manual
  5. ↑ Script error: No such module "citation/CS1".
  6. ↑ Script error: No such module "citation/CS1".
  7. ↑ https://www.pagetable.com/docs/amigados_tripos/tripos_manuals.pdf Template:Webarchive Template:Bare URL PDF
  8. ↑ Script error: No such module "citation/CS1".
  9. ↑ Script error: No such module "citation/CS1".
  10. ↑ Script error: No such module "citation/CS1".
  11. ↑ Script error: No such module "citation/CS1".
  12. ↑ Script error: No such module "citation/CS1".
  13. ↑ Script error: No such module "citation/CS1".
  14. ↑ Script error: No such module "citation/CS1".
  15. ↑ Script error: No such module "citation/CS1".
  16. ↑ Script error: No such module "citation/CS1".
  17. ↑ Script error: No such module "citation/CS1".
  18. ↑ Script error: No such module "citation/CS1".
  19. ↑ Script error: No such module "citation/CS1".
  20. ↑ Script error: No such module "citation/CS1".
  21. ↑ Script error: No such module "citation/CS1".
  22. ↑ Script error: No such module "citation/CS1".

Script error: No such module "Check for unknown parameters".

Further reading

  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1".

External links

Template:Sister project

Script error: No such module "Navbox".

Retrieved from "http://debianws.lexgopc.com/wiki143/index.php?title=Format_(command)&oldid=7212223"