Adliswil-Felsenegg cable car

From Wikipedia, the free encyclopedia
(Redirected from Felseneggbahn)
Jump to navigation Jump to search

Template:Short description Template:Infobox aerial lift line The Adliswil-Felsenegg cable car (LAF; Template:Langx or Script error: No such module "Lang".) is a cable car in the canton of Zürich in Switzerland. The lower station is located in Adliswil in the Sihl Valley, whilst the upper station is located on the Felsenegg hill on the Albis ridge near the Felsenegg-Girstel TV-tower. The upper station at Felsenegg forms one end of a panoramic walk to the Uetliberg mountain, whilst the lower station is some Script error: No such module "convert". from Adliswil railway station.[1][2]

The cable car is owned by the Luftseilbahn Adliswil-Felsenegg AG and is operated by the Sihltal Zürich Uetliberg Bahn (SZU), the railway company which links both Adliswil and the Uetliberg to the city of Zürich.[1]

History

The cable car was built by the Swiss company Von Roll, opening on 30 December 1954. The line reused the former two cabins of the "Landi-Schwebebahn", built to connect the two sites of the Template:Interlanguage link. In 1960, these cabins were replaced by new cabins with a capacity of 30 passengers, constructed by SIG Neuhausen, and the cables were replaced. In 1977, a majority shareholding was acquired by the Swiss company Denner AG. In 1986, the line was converted to automatic operation. In 1990, the line became part of the zonal tariff structure of the Zürcher Verkehrsverbund (ZVV), and in 1994 self-service ticketing was introduced, with ticket machines at both stations. In 1997, the drive and brake systems were replaced.[1][3]

The line celebrated its 50th anniversary in 2004, when a complete renewal was planned according to the conditions for the license given by the Swiss government. The renewal cost 3.5 million Swiss francs, which was financed by the municipality of Adliswil, the city of Zürich (300,000 each), the ZVV (2 million), and by public fundraising and sponsorship. The renewal included the control and monitoring system, whilst the cabins were replaced by more comfortable, spacious and "sleek" cabins constructed by CWA Constructions SA. The masts and carrying ropes were strengthened, and both the valley and mountain stations renewed. The renewal took place between 4 February and 30 April, with the line re-opening on 1 May 2008.[1][3][4][5]

On 31 March 2010, the 10th million passenger used the cableway. In 2014, the regular 6-yearly revision of the line was undertaken. In 2016, the upper station was renovated.[3][6]

Operation

The Adliswil-Felsenegg cable car is technically an aerial tramway (Template:Langx), where the two cabins are suspended from a single support cable whilst being permanently attached to a second propulsion cable. The two cars shuttle between upper and lower stations, and must operate together so that when one car is at the lower station, the other will be at the upper station. The line is operated automatically, under the supervision of a single employee located at the lower station. The cabins and upper station are normally unmanned.[1]

The lower station is located at an altitude of Script error: No such module "convert"., whilst the upper station is at an altitude of Script error: No such module "convert"., giving a rise of Script error: No such module "convert".. The line is Script error: No such module "convert". long, and passes over a single intermediate tower with a height of Script error: No such module "convert"., with a maximum height above ground level of Script error: No such module "convert".. The span lengths between the stations and towers are Script error: No such module "convert". and Script error: No such module "convert". long and the average gradient is 34.1%. The suspension cable has a diameter of Script error: No such module "convert"., and the propulsion cable of Script error: No such module "convert".. The propulsion cable is driven by an electric motor with a continuous power rating of Script error: No such module "convert". and a peak rating of Script error: No such module "convert".; a backup drive of Script error: No such module "convert". is also available.[7][8]

The two cars each have a capacity of 30 passengers, and travel at a maximum speed of Script error: No such module "convert"., giving a journey time of 5 to 6 minutes and a maximum hourly capacity of 345 passengers in each direction. The car runs every 15 minutes, or more often if traffic requires it. Depending on the time of the year and the day of the week, cars run from either 08:00 or 09:00 to either 20:00 or 22:00.[7][9][10]

Connections

The valley station is in short walking distance (ca. Script error: No such module "convert".) to Adliswil railway station, served by the Template:Ric service of Zürich S-Bahn and busses. The top station (Felsenegg) lies on a panoramic hiking route. Towards north, the ca. Script error: No such module "convert". long hiking path leads to Uetliberg railway station, served by Template:Ric service.

Gallery

References

<templatestyles src="Reflist/styles.css" />

  1. ↑ a b c d e Script error: No such module "citation/CS1".
  2. ↑ Script error: No such module "Citation/CS1".
  3. ↑ a b c Script error: No such module "citation/CS1".
  4. ↑ Script error: No such module "citation/CS1".
  5. ↑ Script error: No such module "citation/CS1".
  6. ↑ Script error: No such module "citation/CS1".
  7. ↑ a b Script error: No such module "citation/CS1".
  8. ↑ Script error: No such module "citation/CS1".
  9. ↑ Script error: No such module "citation/CS1".
  10. ↑ Script error: No such module "citation/CS1".

Script error: No such module "Check for unknown parameters".

External links

Script error: No such module "Coordinates".

Script error: No such module "Navbox". Script error: No such module "Authority control".

Retrieved from "http://debianws.lexgopc.com/wiki143/index.php?title=Adliswil-Felsenegg_cable_car&oldid=8373781"