Diamond Peak (Oregon)
Template:Short description Template:Good article Template:Use mdy dates Template:Infobox mountain
Diamond Peak is a volcano in Klamath and Lane counties of central Oregon in the United States. It is a shield volcano, though it might also be considered a modest stratocone. Diamond Peak forms part of the Cascade Volcanic Arc, a segment of the Cascade Range in western North America extending from southern British Columbia through Oregon to Northern California. Reaching an elevation of Script error: No such module "convert"., the mountain is located near Willamette Pass in the Diamond Peak Wilderness within the Deschutes and Willamette national forests. Surrounded by coniferous forest and visible in the skyline from foothills near Eugene, Diamond Peak offers a few climbing routes and can be scrambled. Diamond Peak is one of Oregon's Matterhorns.
The volcano, consisting mostly of basaltic andesite, has relatively steep slopes and an andesitic volcanic cone that contains pyroclastic materials at its core. The mountain has a number of subfeatures including Mount Yoran, Lakeview Mountain, and a number of cinder cones. Diamond Peak was thoroughly eroded by glaciers and has several cirques as a result.
Geography
Located Script error: No such module "convert". north of Mount Bailey and Diamond Lake in the U.S. state of Oregon,Template:Sfn the Diamond Peak volcano represents the predominant feature of the Willamette Pass localityTemplate:Sfn on the border of Klamath and Lane counties,[1][2] reaching an elevation of Script error: No such module "convert".,[3] and can be seen from many summits in western Oregon.[4]
Wilderness
The Diamond Peak Wilderness, located Script error: No such module "convert". southeast of Eugene and Script error: No such module "convert". southwest of Bend, encompasses an area of Script error: No such module "convert"..[5][6][a] Jointly administered by the Willamette National Forest on the west and the Deschutes National Forest on the east, it incorporates Script error: No such module "convert". of the Pacific Crest Trail and Script error: No such module "convert". of additional trails.Template:Sfn The forested landscape below Diamond Peak features several lakes and creeks.Template:Sfn As the wilderness area ranges in elevation from Script error: No such module "convert".,[3]Template:Sfn Diamond Peak is the highest and most predominant peak, though three other mountains within the wilderness reach elevations greater than Script error: No such module "convert".: Mount Yoran, an unnamed 7,138-foot peak near Mount Yoran, and Lakeview Mountain.[7][8] The wilderness area is largely inaccessible by road in the winter season, though its northern side can be reached from Gold Lake Sno-Park on Oregon Route 58.Template:Sfn
Geology
Diamond Peak forms part of the central arc of the Cascade Volcanoes,Template:Sfn and it joins several other volcanoes in the eastern segment of the Cascade Range known as the High Cascades.Template:Sfn Formed towards the end of the Pleistocene epoch, these mountains are underlain by more ancient volcanoes that subsided due to parallel north–south faulting in the surrounding region.Template:Sfn The High Cascades consist mostly of Pleistocene volcanoes constructed on top of upper Cenozoic lava flows and volcanic vents (produced within the last 15 million years), with compositions varying from homogenous, mafic lava flows (rich in magnesium and iron) and pyroclastic rocks to lava more enriched with basalt and rhyodacite.Template:Sfn
Composed of Script error: No such module "convert". of basaltic andesiteTemplate:Sfn and Script error: No such module "convert". of andesite,Template:Sfn Diamond Peak is a shield volcano,[9]Template:Sfn though it might be considered a "modest stratocone".[10]Template:Sfn because of its steep slopes and the pyroclastic materials at its core.Template:Sfn[11] Having produced andesite, Diamond Peak represents one of the few mafic shield volcanoes in the Cascades that are known to grade into andesite, along with Mount Defiance, Mount Bailey, Devils Peak, and Prospect Peak.Template:Sfn It consists of a main cone made of pyroclastic material including palagonitized rock along with basaltic andesite cinders and glassy scoria,Template:Sfn as well as thin layers of basaltic andesite lava flows.Template:Sfn Diamond Peak has two overlapping volcanic cones, with the elder edifice making up its lower northern peak.Template:Sfn The volcano does not show evidence of producing lahars.Template:Sfn
Eruptive activity began at an eruptive vent by Diamond Peak's northern summit, and shortly after, eruptions commenced at a second, slightly higher vent closer to the southern summit.Template:Sfn Though Diamond Peak's eruptions always produced olivine-rich basaltic andesite, they likely grew more rich in silicon dioxide over time, ranging from 55 to 58 percent silicon dioxide. Lava flows from the volcano vary from Script error: No such module "convert". in thickness, rich in porphyritic rocks like olivine, plagioclase, and clinopyroxene; there is no silicic rock (rich in silica) in the Diamond Peak vicinity.Template:Sfn Mazama Ash, including pumice up to Script error: No such module "convert". thick as well as plagioclase, pyroxene, and hornblende crystals, can be found throughout the Diamond Peak wilderness area and represents the newest volcanic rock deposited in the region.Template:Sfn In total, eruptive output probably totaled Script error: No such module "convert". in volume.Template:Sfn
The volcano is older than the last glacial period that ended 11,000 years ago, but probably younger than 100,000 years.Template:Sfn Though its lava flows show residual magnetism, the volcano does not display evidence of activity within the past 10,000 years, suggesting that it may now be extinct.Template:Sfn The lavas, intrusive volcanic rocks, and volcanic vents have largely gone unaltered by erosion or other geological processes besides sparse mineralization as a result of volcanic exhalative processes,Template:Sfn though there are tiny amounts of specular hematite and malachite in cracks among lava flows.Template:Sfn
Heavily eroded by glaciers,Template:Sfn which no longer exist on Diamond Peak,[12] the mountain has several cirques from glacial erosion, some of which have talus deposits due to Holocene glacial motion. Glaciers also placed both lateral and ground moraines along the lower to middle elevations of the wilderness area, unlayered pebble deposits interbedded with sand and rock. These deposits have very few weathering rinds, corresponding to their production during the late Pleistocene.Template:Sfn Diamond Peak lies directly on the Cascade Crest and therefore receives a heavy snowpack. Snowfields on the northern side may have been glaciers as recently as 100 years ago.[12]
Subfeatures
Nearby features include Crater Butte, a basaltic andesite cinder cone[13] volcano Script error: No such module "convert". to the southeast, and Redtop Mountain, Script error: No such module "convert". to the east and composed of basalt. Both mountains are likely close to the same age as Diamond Peak,Template:Sfn and are formed by layers of red and black lapilli, scoria, and volcanic bombs. The earliest strata have been converted to palagonite with a yellow-orange color that was derived from volcanic glass.Template:Sfn Emigrant Butte, a basaltic andesite peak Script error: No such module "convert". to the south, has been altered more extensively by glaciers, and therefore is likely older. Mount Yoran is a significantly older mountain made from basaltic andesite lava that has a summit protruding from the northern slope of Diamond Peak. It has been potassium–argon dated to be between 520,000 and 220,000 years old.Template:Sfn A shield volcano,[b] Yoran is often considered one of the subfeatures of Diamond Peak, along with the Diamond Rockpile cinder cone and Crater Butte.[13] Yoran and the nearby stratovolcano Lakeview Mountain have similar compositions to Diamond Peak, with dissected cones made of pyroclastic material with embedded lava flows. Both volcanoes have been invaded with sills fed by dikes that can be traced to nearby volcanic plugs.Template:Sfn
Ecology
The ecology of Diamond Peak is characteristic of the Oregon Cascades. The forests supported by the wilderness area include flora such as lodgepole pine, western white pine, mountain hemlock, noble fir, and silver fir trees. Timberline is at an elevation of about Script error: No such module "convert"..Template:Sfn Along Yoran Lake, there are forests of Engelmann spruce, silver fir, and noble fir, as well as a wet meadow.Template:Sfn
Local fauna include common animals found in the Cascade Arc, such as Roosevelt elk, black-tailed deer, red squirrels, snowshoe hares, and a number of bird species. Predators like the American black bear and cougars are in the area.Template:Sfn Trout species can be found throughout the wilderness lakes, brook trout and rainbow trout appearing the most often. The abundance of water supports mosquito populations, particularly during the early summer.Template:Sfn
Human history
William Macy and John Diamond climbed Diamond Peak in July 1852. These two men were part of a preliminary survey party known as the "Road Viewers." They climbed the peak in order to plan a road that later became known as the Free Emigrant Road. They named the peak for Diamond, who was a pioneer from Eugene. The road was completed in late September 1853, only days before some 1,027 people with 250 wagons arrived at the Deschutes River at what is now Bend. These emigrants, known as the "Lost Wagon Train of 1853," were following Elijah Elliott through the central Oregon high desert on what became known as the Elliott Cutoff. It took time to locate the road because it was Script error: No such module "convert". upstream on the Deschutes. The road led them to Emigrant Pass by Summit Lake and then down the western side of the pass. In mid-October the emigrants were discovered on the Middle Fork Willamette River by the settlers of the upper Willamette Valley, and a large rescue operation was launched to help the emigrants reach the settlements. This emigration doubled the population of Lane County.[14]
Diamond Peak and the surrounding wilderness area have not been the subject of any major mining operations. Besides old placers (accumulations of valuable minerals formed by gravity separation during sedimentary processes) that can be found along the Crescent Creek to the east of the Diamond Peak Wilderness, no mineral resources of interest have been identified in the local area. While cinder from the Red Mountain and Crater Butte cinder cones, estimated at a volume of Script error: No such module "convert".,Template:Sfn might be useful for construction materials for road building, there is plenty of cinder and rock outside of the immediate vicinity of Diamond Peak.Template:Sfn The closest mining operations took place in the Bohemia district, which lies Script error: No such module "convert". to the west of Diamond Peak. Moreover, the volcano has little potential as a geothermal energy resource,Template:Sfn since the surrounding area lacks hot springs.Template:Sfn Therefore, in the 1980s, surveyors determined that there is little future potential for mineral deposits or geothermal energy resources for Diamond Peak or the wilderness area.Template:Sfn
Recreation
Though Diamond Peak cannot be accessed by paved roads, it lies adjacent on its eastern side to the Pacific Crest Trail. Although the mountain lacks a clearly denoted trail to the top,Template:Sfn and itself has multiple peaks, which can make identification of the summit difficult, summitting Diamond Peak is not a technical climb. Instead, it is a physically demanding hike and scramble that climbs Script error: No such module "convert". and runs for Script error: No such module "convert"., lasting between six and eight hours. Climbers can access Diamond Peak from two major trailheads at Rockpile and Summit Lake to the southeast of Oakridge and Eugene. The two major routes to the southern summit offer views of Summit Lake and Mount Thielsen.[4]
Another route for climbing Diamond Peak begins from Corrigan Lake, which can be reached by forest roads about Script error: No such module "convert". past Hills Creek Reservoir near Oakridge.Template:Sfn The Corrigan Lake Trailhead starts at an elevation of Script error: No such module "convert"., following a forested trail toward Diamond Peak's western flank.Template:Sfn A challenging trip, it may demand the use of crampons (traction devices attached to footwear to improve mobility on snow and ice)Template:Sfn and an ice axe if conditions dictate.Template:Sfn Because of avalanche hazards on the western side of Diamond Peak, the route can be dangerous.Template:Sfn The climb runs about Script error: No such module "convert". for the round trip, achieving the peak's elevation of Script error: No such module "convert"..[3]Template:Sfn
Notes
- [a] <templatestyles src="Citation/styles.css"/>^ This is the acreage given by the United States Forest Service websites; Wuerthner (2003) lists the acreage as Script error: No such module "convert"..Template:Sfn
- [b] <templatestyles src="Citation/styles.css"/>^ Sherrod et al. (1983) list Mount Yoran as a stratovolcano.Template:Sfn
References
<templatestyles src="Reflist/styles.css" />
- ↑ Cite error: Script error: No such module "Namespace detect".Script error: No such module "Namespace detect".
- ↑ Script error: No such module "Template wrapper".
- ↑ a b c Cite error: Script error: No such module "Namespace detect".Script error: No such module "Namespace detect".
- ↑ a b Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "Citation/CS1".
- ↑ Script error: No such module "Citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Cite error: Script error: No such module "Namespace detect".Script error: No such module "Namespace detect".
- ↑ Script error: No such module "citation/CS1".
- ↑ a b Script error: No such module "citation/CS1".
- ↑ a b Template:Cite gvp
- ↑ Script error: No such module "citation/CS1".
Script error: No such module "Check for unknown parameters".
Sources
- Script error: No such module "citation/CS1".
- Script error: No such module "citation/CS1".
- Script error: No such module "citation/CS1".
- Script error: No such module "citation/CS1".
- Script error: No such module "citation/CS1".
- Script error: No such module "citation/CS1".
- Script error: No such module "citation/CS1".
- Script error: No such module "citation/CS1".
External links
Template:Sister project
- Script error: No such module "citation/CS1".
- Script error: No such module "citation/CS1".
- Script error: No such module "Template wrapper".
- Template:Cite summitpost
Script error: No such module "Navbox". Script error: No such module "Navbox".
- Pages with script errors
- Pages with reference errors
- Pages with broken file links
- Cascade Volcanoes
- Landforms of Lane County, Oregon
- Mountains of Klamath County, Oregon
- Mountains of Lane County, Oregon
- Mountains of Oregon
- Pleistocene shield volcanoes
- Shield volcanoes of the United States
- Subduction volcanoes
- Volcanoes of Klamath County, Oregon
- Stratovolcanoes of Oregon
- Stratovolcanoes with shield volcano characteristics