Elliptic integral

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

Template:Short description Template:Use American English In integral calculus, an elliptic integral is one of a number of related functions defined as the value of certain integrals, which were first studied by Giulio Fagnano and Leonhard Euler (c.Template:TrimScript error: No such module "Check for unknown parameters".). Their name originates from their connection with the problem of finding the arc length of an ellipse.

Modern mathematics defines an "elliptic integral" as any function fScript error: No such module "Check for unknown parameters". which can be expressed in the form

f(x)=cxR(t,P(t))dt,

where RScript error: No such module "Check for unknown parameters". is a rational function of its two arguments, PScript error: No such module "Check for unknown parameters". is a polynomial of degree 3 or 4 with no repeated roots, and cScript error: No such module "Check for unknown parameters". is a constant.

In general, integrals in this form cannot be expressed in terms of elementary functions. Exceptions to this general rule are when PScript error: No such module "Check for unknown parameters". has repeated roots, when R(x, y)Script error: No such module "Check for unknown parameters". contains no odd powers of yScript error: No such module "Check for unknown parameters"., and when the integral is pseudo-elliptic. However, with the appropriate reduction formula, every elliptic integral can be brought into a form that involves integrals over rational functions and the three Legendre canonical forms, also known as the elliptic integrals of the first, second and third kind.

Besides the Legendre form given below, the elliptic integrals may also be expressed in Carlson symmetric form. Additional insight into the theory of the elliptic integral may be gained through the study of the Schwarz–Christoffel mapping. Historically, elliptic functions were discovered as inverse functions of elliptic integrals.

Argument notation

Incomplete elliptic integrals are functions of two arguments; complete elliptic integrals are functions of a single argument. These arguments are expressed in a variety of different but equivalent ways as they give the same elliptic integral. Most texts adhere to a canonical naming scheme, using the following naming conventions.

For expressing one argument:

  • αScript error: No such module "Check for unknown parameters"., the modular angle
  • k = sin αScript error: No such module "Check for unknown parameters"., the elliptic modulus or eccentricity
  • m = k2 = sin2 αScript error: No such module "Check for unknown parameters"., the parameter

Each of the above three quantities is completely determined by any of the others (given that they are non-negative). Thus, they can be used interchangeably.

The other argument can likewise be expressed as φScript error: No such module "Check for unknown parameters"., the amplitude, or as xScript error: No such module "Check for unknown parameters". or uScript error: No such module "Check for unknown parameters"., where x = sin φ = sn uScript error: No such module "Check for unknown parameters". and snScript error: No such module "Check for unknown parameters". is one of the Jacobian elliptic functions.

Specifying the value of any one of these quantities determines the others. Note that uScript error: No such module "Check for unknown parameters". also depends on mScript error: No such module "Check for unknown parameters".. Some additional relationships involving uScript error: No such module "Check for unknown parameters". include cosφ=cnu,and1msin2φ=dnu.

The latter is sometimes called the delta amplitude and written as Δ(φ) = dn uScript error: No such module "Check for unknown parameters".. Sometimes the literature also refers to the complementary parameter, the complementary modulus, or the complementary modular angle. These are further defined in the article on quarter periods.

In this notation, the use of a vertical bar as delimiter indicates that the argument following it is the "parameter" (as defined above), while the backslash indicates that it is the modular angle. The use of a semicolon implies that the argument preceding it is the sine of the amplitude: F(φ,sinα)=F(φsin2α)=F(φα)=F(sinφ;sinα). This potentially confusing use of different argument delimiters is traditional in elliptic integrals and much of the notation is compatible with that used in the reference book by Abramowitz and Stegun and that used in the integral tables by Gradshteyn and Ryzhik.

There are still other conventions for the notation of elliptic integrals employed in the literature. The notation with interchanged arguments, F(k, φ)Script error: No such module "Check for unknown parameters"., is often encountered; and similarly E(k, φ)Script error: No such module "Check for unknown parameters". for the integral of the second kind. Abramowitz and Stegun substitute the integral of the first kind, F(φ, k)Script error: No such module "Check for unknown parameters"., for the argument Template:Mvar in their definition of the integrals of the second and third kinds, unless this argument is followed by a vertical bar: i.e. E(F(φ, k) | k2)Script error: No such module "Check for unknown parameters". for E(φ | k2)Script error: No such module "Check for unknown parameters".. Moreover, their complete integrals employ the parameter k2Script error: No such module "Check for unknown parameters". as argument in place of the modulus kScript error: No such module "Check for unknown parameters"., i.e. K(k2)Script error: No such module "Check for unknown parameters". rather than K(k)Script error: No such module "Check for unknown parameters".. And the integral of the third kind defined by Gradshteyn and Ryzhik, Π(φ, n, k)Script error: No such module "Check for unknown parameters"., puts the amplitude Template:Mvar first and not the "characteristic" Template:Mvar.

Thus one must be careful with the notation when using these functions, because various reputable references and software packages use different conventions in the definitions of the elliptic functions. For example, Wolfram's Mathematica software and Wolfram Alpha define the complete elliptic integral of the first kind in terms of the parameter mScript error: No such module "Check for unknown parameters"., instead of the elliptic modulus kScript error: No such module "Check for unknown parameters"..

Incomplete elliptic integral of the first kind

The incomplete elliptic integral of the first kind Template:Mvar is defined as

F(φ,k)=F(φk2)=F(sinφ;k)=0φdθ1k2sin2θ.

This is Legendre's trigonometric form of the elliptic integral; substituting t = sin θScript error: No such module "Check for unknown parameters". and x = sin φScript error: No such module "Check for unknown parameters"., one obtains Jacobi's algebraic form:

F(x;k)=0xdt(1t2)(1k2t2).

Equivalently, in terms of the amplitude and modular angle one has: F(φα)=F(φ,sinα)=0φdθ1(sinθsinα)2.

With x = sn(u, k)Script error: No such module "Check for unknown parameters". one has: F(x;k)=u; demonstrating that this Jacobian elliptic function is a simple inverse of the incomplete elliptic integral of the first kind.

The incomplete elliptic integral of the first kind has following addition theoremScript error: No such module "Unsubst".: F[arctan(x),k]+F[arctan(y),k]=F[arctan(xk'2y2+1y2+1)+arctan(yk'2x2+1x2+1),k]

The elliptic modulus can be transformed that way: F[arcsin(x),k]=21+1k2F[arcsin((1+1k2)x1+1k2x2),11k21+1k2]

Incomplete elliptic integral of the second kind

The incomplete elliptic integral of the second kind EScript error: No such module "Check for unknown parameters". in Legendre's trigonometric form is

E(φ,k)=E(φ|k2)=E(sinφ;k)=0φ1k2sin2θdθ.

Substituting t = sin θScript error: No such module "Check for unknown parameters". and x = sin φScript error: No such module "Check for unknown parameters"., one obtains Jacobi's algebraic form:

E(x;k)=0x1k2t21t2dt.

Equivalently, in terms of the amplitude and modular angle: E(φα)=E(φ,sinα)=0φ1(sinθsinα)2dθ.

Relations with the Jacobi elliptic functions include E(sn(u;k);k)=0udn2(w;k)dw=uk20usn2(w;k)dw=(1k2)u+k20ucn2(w;k)dw.

The meridian arc length from the equator to latitude φScript error: No such module "Check for unknown parameters". is written in terms of EScript error: No such module "Check for unknown parameters".: m(φ)=a(E(φ,e)+d2dφ2E(φ,e)), where aScript error: No such module "Check for unknown parameters". is the semi-major axis, and eScript error: No such module "Check for unknown parameters". is the eccentricity.

The incomplete elliptic integral of the second kind has following addition theoremScript error: No such module "Unsubst".: E[arctan(x),k]+E[arctan(y),k]=E[arctan(xk'2y2+1y2+1)+arctan(yk'2x2+1x2+1),k]+k2xyk'2x2y2+x2+y2+1(xk'2y2+1y2+1+yk'2x2+1x2+1)

The elliptic modulus can be transformed that way: E[arcsin(x),k]=(1+1k2)E[arcsin((1+1k2)x1+1k2x2),11k21+1k2]1k2F[arcsin(x),k]+k2x1x21+1k2x2

Incomplete elliptic integral of the third kind

The incomplete elliptic integral of the third kind ΠScript error: No such module "Check for unknown parameters". is Π(n;φα)=0φ11nsin2θdθ1(sinθsinα)2

or

Π(n;φ|m)=0sinφ11nt2dt(1mt2)(1t2).

The number nScript error: No such module "Check for unknown parameters". is called the characteristic and can take on any value, independently of the other arguments. Note though that the value Π(1; Template:Sfrac | m)Script error: No such module "Check for unknown parameters". is infinite, for any mScript error: No such module "Check for unknown parameters"..

A relation with the Jacobian elliptic functions is Π(n;am(u;k);k)=0udw1nsn2(w;k).

The meridian arc length from the equator to latitude φScript error: No such module "Check for unknown parameters". is also related to a special case of ΠScript error: No such module "Check for unknown parameters".:

m(φ)=a(1e2)Π(e2;φ|e2).

Complete elliptic integral of the first kind

File:Mplwp complete ellipticKk.svg
Plot of the complete elliptic integral of the first kind K(k)Script error: No such module "Check for unknown parameters".

Elliptic Integrals are said to be 'complete' when the amplitude φ = Template:SfracScript error: No such module "Check for unknown parameters". and therefore x = 1Script error: No such module "Check for unknown parameters".. The complete elliptic integral of the first kind KScript error: No such module "Check for unknown parameters". may thus be defined as K(k)=0π2dθ1k2sin2θ=01dt(1t2)(1k2t2), or more compactly in terms of the incomplete integral of the first kind as K(k)=F(π2,k)=F(π2|k2)=F(1;k).

It can be expressed as a power series K(k)=π2n=0((2n)!22n(n!)2)2k2n=π2n=0(P2n(0))2k2n,

where PnScript error: No such module "Check for unknown parameters". is the Legendre polynomials, which is equivalent to

K(k)=π2(1+(12)2k2+(1324)2k4++((2n1)!!(2n)!!)2k2n+),

where n!!Script error: No such module "Check for unknown parameters". denotes the double factorial. In terms of the Gauss hypergeometric function, the complete elliptic integral of the first kind can be expressed as

K(k)=π22F1(12,12;1;k2).

The complete elliptic integral of the first kind is sometimes called the quarter period. It can be computed very efficiently in terms of the arithmetic–geometric mean:Template:Sfn K(k)=π2agm(1,1k2).

Therefore, the modulus can be transformed as:

K(k)=π2agm(1,1k2)=π2agm(12+1k22,1k24)=π(1+1k2)agm(1,21k24(1+1k2))=21+1k2K(11k21+1k2)

This expression is valid for all n and 0 ≤ k ≤ 1Script error: No such module "Check for unknown parameters".:

K(k)=n[a=1ndn(2anK(k);k)]1K[kna=1nsn(2a1nK(k);k)2]

Relation to the gamma function

If k2 = λ(i

  1. REDIRECT Template:Radic

Template:Rcat shell)Script error: No such module "Check for unknown parameters". and r+ (where Template:Mvar is the modular lambda function), then K(k)Script error: No such module "Check for unknown parameters". is expressible in closed form in terms of the gamma function.[1] For example, r = 2Script error: No such module "Check for unknown parameters"., r = 3Script error: No such module "Check for unknown parameters". and r = 7Script error: No such module "Check for unknown parameters". give, respectively,[2]

K(21)=Γ(18)Γ(38)2+1824π,

and

K(3122)=18π3443Γ(13)3

and

K(3742)=Γ(17)Γ(27)Γ(47)474π.

More generally, the condition that iKK=iK(1k2)K(k) be in an imaginary quadratic field[note 1] is sufficient.[3][4] For instance, if k = e5πi/6Script error: No such module "Check for unknown parameters"., then Template:Sfrac = e2πi/3Script error: No such module "Check for unknown parameters". and[5]

K(e5πi/6)=eπi/12Γ3(13)34423π.

Asymptotic expressions

K(k)π2+π8k21k2π16k41k2 This approximation has a relative precision better than Script error: No such module "val". for k < Template:SfracScript error: No such module "Check for unknown parameters".. Keeping only the first two terms is correct to 0.01 precision for k < Template:SfracScript error: No such module "Check for unknown parameters"..Script error: No such module "Unsubst".

Differential equation

The differential equation for the elliptic integral of the first kind is ddk(k(1k2)dK(k)dk)=kK(k)

A second solution to this equation is K(1k2). This solution satisfies the relation ddkK(k)=E(k)k(1k2)K(k)k.

Continued fraction

A continued fraction expansion is:[6] K(k)2π=14+n=0qn1+q2n=14+11q+(1q)21q3+q(1q2)21q5+q2(1q3)21q7+q3(1q4)21q9+, where the nome is q=q(k)=exp[πK(k)/K(k)] in its definition.

Inverting the period ratio

Here, we use the complete elliptic integral of the first kind with the parameter m instead, because the squaring function introduces problems when inverting in the complex plane. So let

K[m]=0π/2dθ1msin2θ

and let

θ2(τ)=2eπiτ/4n=0qn(n+1),q=eπiτ,Imτ>0,
θ3(τ)=1+2n=1qn2,q=eπiτ,Imτ>0

be the theta functions.

The equation

τ=iK[1m]K[m]

can then be solved (provided that a solution m exists) by

m=θ2(τ)4θ3(τ)4

which is in fact the modular lambda function.

For the purposes of computation, the error analysis is given by[7]

|eπiτ/4θ2(τ)2n=0N1qn(n+1)|{2|q|N(N+1)1|q|2N+1,|q|2N+1<1,otherwise
|θ3(τ)(1+2n=1N1qn2)|{2|q|N21|q|2N+1,|q|2N+1<1,otherwise

where N1 and Imτ>0.

Also

K[m]=π2θ3(τ)2,τ=iK[1m]K[m]

where m{0,1}.

Complete elliptic integral of the second kind

File:Mplwp complete ellipticEk.svg
Plot of the complete elliptic integral of the second kind E(k)Script error: No such module "Check for unknown parameters".

The complete elliptic integral of the second kind EScript error: No such module "Check for unknown parameters". is defined as

E(k)=0π21k2sin2θdθ=011k2t21t2dt,

or more compactly in terms of the incomplete integral of the second kind E(φ,k)Script error: No such module "Check for unknown parameters". as

E(k)=E(π2,k)=E(1;k).

For an ellipse with semi-major axis aScript error: No such module "Check for unknown parameters". and semi-minor axis bScript error: No such module "Check for unknown parameters". and eccentricity e =

  1. REDIRECT Template:Radic

Template:Rcat shellScript error: No such module "Check for unknown parameters"., the complete elliptic integral of the second kind E(e)Script error: No such module "Check for unknown parameters". is equal to one quarter of the circumference CScript error: No such module "Check for unknown parameters". of the ellipse measured in units of the semi-major axis aScript error: No such module "Check for unknown parameters".. In other words:

C=4aE(e).

The complete elliptic integral of the second kind can be expressed as a power series[8]

E(k)=π2n=0((2n)!22n(n!)2)2k2n12n,

which is equivalent to

E(k)=π2(1(12)2k21(1324)2k43((2n1)!!(2n)!!)2k2n2n1).

In terms of the Gauss hypergeometric function, the complete elliptic integral of the second kind can be expressed as

E(k)=π22F1(12,12;1;k2).

The modulus can be transformed that way: E(k)=(1+1k2)E(11k21+1k2)1k2K(k)

Computation

Like the integral of the first kind, the complete elliptic integral of the second kind can be computed very efficiently using the arithmetic–geometric mean.Template:Sfn

Define sequences Template:Mvar and Template:Mvar, where a0 = 1Script error: No such module "Check for unknown parameters"., g0 =

  1. REDIRECT Template:Radic

Template:Rcat shell = kTemplate:PrimeScript error: No such module "Check for unknown parameters". and the recurrence relations an + 1 = Template:SfracScript error: No such module "Check for unknown parameters"., gn + 1 =

  1. REDIRECT Template:Radic

Template:Rcat shellScript error: No such module "Check for unknown parameters". hold. Furthermore, define cn=|an2gn2|.

By definition,

a=limnan=limngn=agm(1,1k2).

Also

limncn=0.

Then

E(k)=π2a(1n=02n1cn2).

In practice, the arithmetic-geometric mean would simply be computed up to some limit. This formula converges quadratically for all Template:Abs ≤ 1Script error: No such module "Check for unknown parameters".. To speed up computation further, the relation cn + 1 = Template:SfracScript error: No such module "Check for unknown parameters". can be used.

Furthermore, if k2 = λ(i

  1. REDIRECT Template:Radic

Template:Rcat shell)Script error: No such module "Check for unknown parameters". and r+ (where Template:Mvar is the modular lambda function), then E(k)Script error: No such module "Check for unknown parameters". is expressible in closed form in terms of K(k)=π2agm(1,1k2) and hence can be computed without the need for the infinite summation term. For example, r = 1Script error: No such module "Check for unknown parameters"., r = 3Script error: No such module "Check for unknown parameters". and r = 7Script error: No such module "Check for unknown parameters". give, respectively,[9]

E(12)=12K(12)+π4K(12),

and

E(3122)=3+36K(3122)+π312K(3122),

and

E(3742)=7+2714K(3742)+π728K(3742).

Derivative and differential equation

dE(k)dk=E(k)K(k)k (k21)ddk(kdE(k)dk)=kE(k)

A second solution to this equation is E(

  1. REDIRECT Template:Radic

Template:Rcat shell) − K(

  1. REDIRECT Template:Radic

Template:Rcat shell)Script error: No such module "Check for unknown parameters"..

Complete elliptic integral of the third kind

File:Mplwp complete ellipticPi nfixed k.svg
Plot of the complete elliptic integral of the third kind Π(n,k)Script error: No such module "Check for unknown parameters". with several fixed values of Template:Mvar

The complete elliptic integral of the third kind ΠScript error: No such module "Check for unknown parameters". can be defined as

Π(n,k)=0π2dθ(1nsin2θ)1k2sin2θ.

Note that sometimes the elliptic integral of the third kind is defined with an inverse sign for the characteristic nScript error: No such module "Check for unknown parameters"., Π(n,k)=0π2dθ(1+nsin2θ)1k2sin2θ.

Just like the complete elliptic integrals of the first and second kind, the complete elliptic integral of the third kind can be computed very efficiently using the arithmetic-geometric mean.Template:Sfn

Partial derivatives

Π(n,k)n=12(k2n)(n1)(E(k)+1n(k2n)K(k)+1n(n2k2)Π(n,k))Π(n,k)k=knk2(E(k)k21+Π(n,k))

Jacobi zeta function

In 1829, Jacobi defined the Jacobi zeta function: Z(φ,k)=E(φ,k)E(k)K(k)F(φ,k). It is periodic in φ with minimal period π. It is related to the Jacobi zn function by Z(φ,k)=zn(F(φ,k),k). In the literature (e.g. Whittaker and Watson (1927)), sometimes Z means Wikipedia's zn. Some authors (e.g. King (1924)) use Z for both Wikipedia's Z and zn.

Legendre's relation

The Legendre's relation or Legendre Identity shows the relation of the integrals K and E of an elliptic modulus and its anti-related counterpart[10][11] in an integral equation of second degree:

For two modules that are Pythagorean counterparts to each other, this relation is valid:

K(ε)E(1ε2)+E(ε)K(1ε2)K(ε)K(1ε2)=π2

For example:

K(35)E(45)+E(35)K(45)K(35)K(45)=12π

And for two modules that are tangential counterparts to each other, the following relationship is valid:

(1+ε)K(ε)E(1ε1+ε)+21+εE(ε)K(1ε1+ε)2K(ε)K(1ε1+ε)=12π

For example:

43K(13)E(12)+32E(13)K(12)2K(13)K(12)=12π

The Legendre's relation for tangential modular counterparts results directly from the Legendre's identity for Pythagorean modular counterparts by using the Landen modular transformation on the Pythagorean counter modulus.

Special identity for the lemniscatic case

For the lemniscatic case, the elliptic modulus or specific eccentricity ε is equal to half the square root of two. Legendre's identity for the lemniscatic case can be proved as follows:

According to the Chain rule these derivatives hold:

ddyK(122)F[arccos(xy);122]=2x1x4y4
ddy2E(122)K(122)2E[arccos(xy);122]+F[arccos(xy);122]=2x3y21x4y4

By using the Fundamental theorem of calculus these formulas can be generated:

K(122)F[arccos(x);122]=012x1x4y4dy
2E(122)K(122)2E[arccos(x);122]+F[arccos(x);122]=012x3y21x4y4dy

The Linear combination of the two now mentioned integrals leads to the following formula:

21x4{2E(122)K(122)2E[arccos(x);122]+F[arccos(x);122]}+
+2x21x4{K(122)F[arccos(x);122]}=012x3(y2+1)(1x4)(1x4y4)dy

By forming the original antiderivative related to x from the function now shown using the Product rule this formula results:

{K(122)F[arccos(x);122]}{2E(122)K(122)2E[arccos(x);122]+F[arccos(x);122]}=
=011y2(y2+1)[artanh(y2)artanh(1x4y21x4y4)]dy

If the value x=1 is inserted in this integral identity, then the following identity emerges:

K(122)[2E(122)K(122)]=011y2(y2+1)artanh(y2)dy=
=[2arctan(y)1y(1y2)artanh(y2)]y=0y=1=2arctan(1)=π2

This is how this lemniscatic excerpt from Legendre's identity appears:

2E(122)K(122)K(122)2=π2

Generalization for the overall case

Now the modular general case[12][13] is worked out. For this purpose, the derivatives of the complete elliptic integrals are derived after the modulus ε and then they are combined. And then the Legendre's identity balance is determined.

Because the derivative of the circle function is the negative product of the identical mapping function and the reciprocal of the circle function:

ddε1ε2=ε1ε2

These are the derivatives of K and E shown in this article in the sections above:

ddεK(ε)=1ε(1ε2)[E(ε)(1ε2)K(ε)]
ddεE(ε)=1ε[K(ε)E(ε)]

In combination with the derivative of the circle function these derivatives are valid then:

ddεK(1ε2)=1ε(1ε2)[ε2K(1ε2)E(1ε2)]
ddεE(1ε2)=ε1ε2[K(1ε2)E(1ε2)]

Legendre's identity includes products of any two complete elliptic integrals. For the derivation of the function side from the equation scale of Legendre's identity, the Product rule is now applied in the following:

ddεK(ε)E(1ε2)=1ε(1ε2)[E(ε)E(1ε2)K(ε)E(1ε2)+ε2K(ε)K(1ε2)]
ddεE(ε)K(1ε2)=1ε(1ε2)[E(ε)E(1ε2)+E(ε)K(1ε2)(1ε2)K(ε)K(1ε2)]
ddεK(ε)K(1ε2)=1ε(1ε2)[E(ε)K(1ε2)K(ε)E(1ε2)(12ε2)K(ε)K(1ε2)]

Of these three equations, adding the top two equations and subtracting the bottom equation gives this result:

ddε[K(ε)E(1ε2)+E(ε)K(1ε2)K(ε)K(1ε2)]=0

In relation to the ε the equation balance constantly gives the value zero.

The previously determined result shall be combined with the Legendre equation to the modulus ε=1/2 that is worked out in the section before:

2E(122)K(122)K(122)2=π2

The combination of the last two formulas gives the following result:

K(ε)E(1ε2)+E(ε)K(1ε2)K(ε)K(1ε2)=12π

Because if the derivative of a continuous function constantly takes the value zero, then the concerned function is a constant function. This means that this function results in the same function value for each abscissa value ε and the associated function graph is therefore a horizontal straight line.

See also

Script error: No such module "Portal".

<templatestyles src="Div col/styles.css"/>

References

Notes

<templatestyles src="Reflist/styles.css" />

Script error: No such module "Check for unknown parameters".

References

<templatestyles src="Reflist/styles.css" />

  1. Script error: No such module "citation/CS1". p. 296
  2. Script error: No such module "citation/CS1". p. 298
  3. Script error: No such module "Citation/CS1".
  4. Script error: No such module "Citation/CS1".
  5. Script error: No such module "citation/CS1".
  6. N.Bagis,L.Glasser.(2015)"Evaluations of a Continued fraction of Ramanujan". Rend.Sem.Mat.Univ.Padova, Vol.133 pp 1-10
  7. Script error: No such module "citation/CS1".
  8. Script error: No such module "citation/CS1".
  9. Script error: No such module "citation/CS1". p. 26, 161
  10. Script error: No such module "citation/CS1".
  11. Script error: No such module "citation/CS1".
  12. Script error: No such module "citation/CS1".
  13. Script error: No such module "citation/CS1".

Script error: No such module "Check for unknown parameters".

Sources

<templatestyles src="Refbegin/styles.css" />

  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1".
  • Script error: No such module "Citation/CS1".
  • Script error: No such module "citation/CS1"..
  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1".

External links

Template:Sister project

Template:Nonelementary Integral Template:Algebraic curves navbox Template:Authority control