CX (noise reduction)

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

Template:Short description Template:Use dmy dates Template:Use list-defined references

File:CX logo.svg
The CX logo, present on LPs and laserdiscs utilizing CX noise reduction

CX is a noise reduction system for recorded analog audio. It was developed by CBS Laboratories (a division of CBS) in the late 1970s as a low-cost competitor to other noise reduction (NR) systems such as dbx disc and High-Com II, and was officially introduced in 1981.[1][2][3][4] The name CX was derived from "Compatible eXpansion", a feature of the technique.[4]

Use on vinyl LP records

CX was originally designed by CBS as a noise-reduction technology for vinyl LP records,[5][4] similar to the earlier dbx disc (based on dbx II) and High-Com II systems, but, like the later UC system, it aimed at the lower-cost consumer mass market rather than high-end audiophile niche markets only. CX-encoded records required a special CX expander connected to a stereo system, in order to fully reproduce the CX encoded sound on the LP. However, in contrast to dbx disc and High-Com II, CX-encoded records, like UC-encoded records, could also be played without a decoder with a resulting (claimed acceptable) amount of dynamic range compression.[6][4] CX being a 2:1:2 compander system, a noise reduction of 20 dB(A) was achieved for a resulting maximum dynamic range of typically 80 to 85 dB(A) (other sources claiming up to 95 dB(A)[7] or even 107 dB[8]).[6] The theory of operation is described in U.S. patent 4376916.[9]

The project was led by CBS Records group vice president Bob Jamieson and carried out by a team led by Daniel W. Gravereaux[2][6] and Louis A. Abbagnaro.[6] The label predicted that CX encoding would become standard on all new LP releases, but this did not happen. CBS struggled to gain support for the system from other record companies. The process was controversial among CBS executives[4] and unpopular with some artists. Classical guitarist Liona Boyd demanded that the CX encoded version of one of her albums be withdrawn because of perceived shortcomings, even though Jamieson claimed that CBS had the technical means to overcome such objections.[10]

Based on an UREI reference design published by CBS,[11] many third-party builders of CX decoders used a dual operational transconductance amplifier 13700D made by JRC (today NJR),[12][13][14][15][16][11] coupled with a pair of quadruple JFET operational amplifier chips TL084 in their designs. Among them were Telefunken with their RN 100 CX, RS 120 CX[16] and RS 220 CX. The documented playback time constants of the decoders were slightly changed by CBS in 1981/1982.[11]

Script error: No such module "anchor".In 1982, the CX integrated circuit U2141B was developed by AEG-Telefunken, Germany, by Ernst F. Schröder, Dietrich Höppner and Kurt Hintzmann,[2] the same team who previously designed the High Com noise reduction system,[2][17] a broadband compander with up to 20 dB of noise reduction.[18][6] Hitachi also offered dedicated CX chips named HA12043 (for CX 14) and HA12044 (for CX 20) in 1983.[17][18][19]

Approximately 70 CX encoded LP titles were released by CBS up to 1983 in the United States.[4] Gasparo also released a number of CX encoded records.[4] In Europe, many CX discs were manufactured in the Netherlands with the catalog number prefix "CBSCX". The albums in this series also came in standard, non-CX encoded versions. A total of about 150 CX encoded titles exist.

The implementation of a software decoder for CX is under consideration.[20]

Use on LaserDisc and CED VideoDisc

File:Laserdisc back sleeve with CX logo.jpg
Back of a Laserdisc sleeve, noting the use of CX noise reduction.

While the implementation of CX with LPs was quite unsuccessful and short-lived, CX would later see success as the noise reduction used for the stereo analog audio tracks on the LaserDisc (LD) format. It was also used for the audio tracks on discs of the RCA SelectaVision CED Videodisc system.Template:Fact

All LaserDisc (and stereophonic CED) players manufactured since 1981, when the CX equipped LD-1100 was introduced, had CX noise reduction capability as a standard feature. Pioneer also released a stand-alone CX adapter R-1000[21] for use with their VP-1000, Magnavox's VH-8000/8005 and the industrial players that were all released before CX was adopted. The first CX encoded LaserDisc was Olivia Newton-John's Olivia Physical, released by MCA Videodisc.Template:Fact

CX decoders made for LPs could not be used with LDs because the CX companding specifications for LaserDisc were changed, from 20 dB of noise reduction to 14 dB, along with moving the 'threshold' where compression/expansion changes from 2:1 to 1:1 from −40 dB to −28 dB - other minor changes to the decoding time constants were made as well.[22] In addition, some of the LaserDisc's FM audio encoding specifications were modified too, allowing more headroom and better high frequency response at high levels. These changes were made because, at the time of CX's adoption on LaserDisc (1981), the vast majority of program sources used for mastering, such as 35 mm optical and magnetic film soundtracks, as well as the 2-inch IVC-9000 and the 1-inch C-Type videotape formats used for LaserDisc mastering, had signal-to-noise ratios low enough that undecoded playback would accentuate their noise to unacceptable levels.Template:Fact

By reducing the total amount of noise reduction and modifying other aspects of the CX system to better match LD's FM audio shortcomings, undecoded playback sound quality was maintained and vastly improved decoded sound was achieved at the same time. The possibility of audible pumping or breathing artifacts during CX decoded playback were reduced as well.[23]

While CX greatly improved the audio quality of LaserDisc's FM audio tracks, its primary reason for adoption was to decrease the amount of interference between the right channel's FM audio carrier and the video carrier's first chroma sideband. Without CX, strict filtering during mastering and playback as well as keeping color saturation below 75% on the master were required to keep any interference below −35 dB, which ensured that no beats or other artifacts were visible in the demodulated image. Although CX improved the picture quality, it was not normally used on discs with mono audio. Pioneer Video, the main manufacturer of LDs at the time, required the studios to request CX and, since most did not know that CX improved the video quality of the finished discs or the audio of mono titles, CX was rarely requested. Due to this lack of knowledge about CX at the studios, there were many stereo titles released without CX encoding and, in fact, CX didn't become standard on all LaserDisc titles until the late 1980s. A look at Pioneer's catalogs as late as 1987 shows that the majority of titles did not have CX encoded analog sound - most were not digital either.Script error: No such module "Unsubst".

For the CED VideoDisc, since stereo was not added to the format until its second year on the market, RCA made CX a mandatory part of CED's stereo system - a disc could not be released in stereo without CX encoding - and the companding specifications were unchanged from those of the LP system due to the CED system's much higher noise levels than the LaserDisc format. Although RCA improved the plastic/carbon formulation used to make discs, which lowered disc noise levels by 3 dB, and modified the mastering system, the CED format still required the full 20 dB of noise reduction that was achieved with the unmodified LP system.Script error: No such module "Unsubst".

Script error: No such module "anchor".The names given by CBS to the two different versions of CX were CX-20 and CX-14.[23][24]

Use in FM radio broadcasting

CX was used in FMX, a commercially unsuccessful noise reduction system developed in the 1980s for FM broadcasting in the United States. FMX was intended to improve fringe area reception of FM stereo by adding a CX-encoded version of the L−R (left-minus-right, or difference) signal modulated in quadrature with the conventional stereo subcarrier. About 50 stations utilized the system, but few FMX-equipped receivers were manufactured, and after FMX was accused in 1989 of actually degrading reception rather than improving it, support dried up and the system was abandoned.

CX enabled equipment

These devices are known to support CX:

  • Script error: No such module "anchor".Backes & Müller CX Decoder[6]
  • Script error: No such module "anchor".CBS CX Expander Model E-1016[3]
  • Script error: No such module "anchor".CBS Technology Center CX Compandor Model 9101
  • Script error: No such module "anchor".cm labs cm678 CX decoder[6]
  • Script error: No such module "anchor".Elektor CX decoders (DIY projects[25][26] based on the LM13700D/NE5517N[27][28][29] and HA12044[19])
  • Script error: No such module "anchor".Kort Elektronik Dynamik Expander + CX Decoder SR[30][6]
  • Script error: No such module "anchor".phase linear / aie CX Decoder Model 220[31]
  • Script error: No such module "anchor".Pioneer CX Decoder R-1000 (external CX 14 expander for LDs)[21]
  • Script error: No such module "anchor".Popular Electronics / Phoenix Systems CX decoder by John Roberts (DIY project based on the CA3280)[32][11][33]
  • Script error: No such module "anchor".Radio-Electronics CX decoder by Joel Cohen (DIY project based on the LM13700)[34]
  • Script error: No such module "anchor".Soundcraftsmen Preamplifier Model CX4000
  • Script error: No such module "anchor".Soundcraftsmen Differential/Comparator Preamp-Equalizer Model CX4100
  • Script error: No such module "anchor".Soundcraftsmen Differential/Comparator Preamp/Equalizer Model CX4200
  • Script error: No such module "anchor".Telefunken RN 100 CX (external phono preamp with CX decoder based on LM13700)[35][6][36]
  • Script error: No such module "anchor".Telefunken RS 120 CX (belt-drive record player with built-in preamp and CX decoder based on the NJM13700D)[16][6]
  • Script error: No such module "anchor".Telefunken RS 220 CX (direct drive record player with built-in preamp and CX decoder)[16][6]
  • Script error: No such module "anchor".Thorens PCX 975 by Heribert Heise (external phone preamp with CX decoder, claiming a dynamic range of up to 107 dB)[8][6]
  • Script error: No such module "anchor".UREI CX Mastering Encoder/Decoder Model 1181 (switchable compander for CX 14 and CX 20 with half-speed mastering option based on Allison Research EGC-101, claiming a dynamic range of up to 95 dB(A))[7][37]
  • CX decoder by Markus Holtwiesche (DIY project based on the HA12044)[38][39]

CX encoded vinyl records

The following vinyl records are known to have been produced in CX encoded editions:[6]

See also

References

<templatestyles src="Reflist/styles.css" />

  1. ↑ Script error: No such module "citation/CS1".
  2. ↑ a b c d Script error: No such module "citation/CS1". [1]
  3. ↑ a b Script error: No such module "citation/CS1".
  4. ↑ a b c d e f g Script error: No such module "citation/CS1". (NB. Strongly biased from a British perspective, but nevertheless very knowledgeable.)
  5. ↑ Script error: No such module "Citation/CS1".
  6. ↑ a b c d e f g h i j k l m Script error: No such module "Citation/CS1".
  7. ↑ a b Script error: No such module "citation/CS1". [2][3] (23 pages) (NB. Includes circuit diagram of the UREI CX Mastering Encoder/Decoder Model 1181 including half-speed modification.)
  8. ↑ a b Script error: No such module "citation/CS1".
  9. ↑ Script error: No such module "citation/CS1". [4]
  10. ↑ Script error: No such module "Citation/CS1".
  11. ↑ a b c d Script error: No such module "citation/CS1".
  12. ↑ Script error: No such module "citation/CS1". (6+1 page)
  13. ↑ Script error: No such module "citation/CS1". (26 pages)
  14. ↑ Script error: No such module "citation/CS1". (29+1 pages)
  15. ↑ Script error: No such module "citation/CS1". (37 pages)
  16. ↑ a b c d Script error: No such module "citation/CS1".Template:Cbignore
  17. ↑ a b Script error: No such module "Citation/CS1".
  18. ↑ a b Script error: No such module "citation/CS1".
  19. ↑ a b Script error: No such module "Citation/CS1". (NB. This article describes a do-it-yourself CX decoder based on the Hitachi HD12044 chip.)
  20. ↑ Script error: No such module "citation/CS1". (23 pages)
  21. ↑ a b Script error: No such module "citation/CS1".
  22. ↑ Script error: No such module "citation/CS1". (8 pages)
  23. ↑ a b Script error: No such module "Citation/CS1".
  24. ↑ Script error: No such module "Citation/CS1".
  25. ↑ Script error: No such module "Citation/CS1".
  26. ↑ Script error: No such module "Citation/CS1". (NB. Includes circuit diagram.)
  27. ↑ Script error: No such module "citation/CS1".
  28. ↑ Script error: No such module "Citation/CS1". (NB. Includes circuit diagram.)
  29. ↑ Script error: No such module "citation/CS1". (10 pages)
  30. ↑ Script error: No such module "Citation/CS1".
  31. ↑ Script error: No such module "citation/CS1". (NB. New-old stock CX encoders originally manufactured in the 1980s in the US by Phase Linear, refurbished with new capacitors, an improved power supply and other tuning by Altmann Industrieelektronik GmbH (aie), Germany.)
  32. ↑ Script error: No such module "Citation/CS1". [5] (6 pages) (NB. Includes circuit diagram.)
  33. ↑ Script error: No such module "citation/CS1". (16 pages)
  34. ↑ Script error: No such module "Citation/CS1". [6]
  35. ↑ Script error: No such module "citation/CS1".
  36. ↑ Script error: No such module "citation/CS1".
  37. ↑ Script error: No such module "citation/CS1". (13 pages)
  38. ↑ Script error: No such module "citation/CS1".
  39. ↑ Script error: No such module "citation/CS1".

Script error: No such module "Check for unknown parameters".

Further reading

  • Script error: No such module "citation/CS1".
  • Script error: No such module "citation/CS1". [7]
  • Script error: No such module "citation/CS1". (NB. 17 cm record.) Script error: No such module "citation/CS1".

External links

  • Script error: No such module "citation/CS1".
Retrieved from "http://debianws.lexgopc.com/wiki143/index.php?title=CX_(noise_reduction)&oldid=2006083"