BWI Rail Station

From Wikipedia, the free encyclopedia
(Redirected from BWI Rail)
Jump to navigation Jump to search

Template:Short description Script error: No such module "about". Template:Use American English Template:Use mdy dates Template:More citations needed Template:Infobox station

BWI Rail Station (signed as BWI Thurgood Marshall Airport) is an intermodal passenger station in Linthicum, Maryland near Baltimore/Washington International Airport (BWI). It is served by Amtrak Northeast Corridor intercity trains, MARC Penn Line regional rail trains, and several local bus lines.

The station is located just over a mile from the airport's terminal. It was the first intercity rail station in the United States built to service an airport.[1] A free shuttle bus runs between the station and the airport terminal at all hours.[2]

Although Penn Station is the Baltimore area's main intercity station, BWI Airport is a major station in its own right. It is Amtrak's sixth-busiest station in the Mid-Atlantic region (behind New York Penn, Washington, Philadelphia, Baltimore Penn, and Albany-Rensselaer), the third-busiest in the Baltimore-Washington corridor, and the 12th busiest nationwide.

History

File:Bill Norman speaking at BWI Rail Station dedication, October 1980.jpg
Amtrak vice president Bill Norman speaks at the dedication ceremony in October 1980

First proposed in 1964 by Charles Adler, a Baltimore-based inventor of traffic and aircraft safety devices,[3] the station was dedicated on October 23, 1980Template:Sndcoincidentally, mere hours after Adler's deathTemplate:Sndand opened for Amtrak intercity and Conrail (now MARC) commuter trains three days later.[4][5]

The station's building houses a ticketing desk, waiting room, and a concessions area. The adjacent parking garage is used by commuters who ride the train to work in Baltimore or Washington, and also contains the bus stop for shuttles to the BWI terminal. The garage was built in the late 1990s to replace a smaller surface lot. It contains 3,200 parking spaces and typically does not fill to capacity.[6] The Carolinian served the station between 1991 and 2004.

Platform renovations

The Template:Convert high-level platforms were rebuilt and lengthened between 2006 and 2010.[7] The existing structures were replaced with new precast concrete segments, and new signs, lights, shelters, railing, canopies, and benches were installed.[8]

Expansion

File:BWI Rail Station construction, June 2019.jpeg
The new station under construction in June 2019

In 2010, $9.4 million was allocated for design and engineering of a new station building and fourth track, which was then expected to cost $80–100 million.[9][10] MDOT requested $300 million in federal funds for the project in 2011, but the request was denied.[11] The Federal Railroad Administration issued a Finding Of No Significant Impact—a major step in the environmental review process—in February 2016, clearing the way for final design and construction to begin after funding was obtained.[12] The project was then expected to cost $600 million and include Template:Convert of fourth track.[11]

On August 27, 2018, the MTA began a $4.7 million project to rebuild and enlarge the station. A temporary station building was used during construction.[13] The new station opened in October 2019, with a ribbon-cutting ceremony held in December.[14][15] The renovation did not modify the Amtrak-owned footbridge, which has water leakage and cleanliness issues, nor add WiFi service in the MTA-owned waiting area. In response, the MTA said that it does not offer WiFi at any of its stations, but is working with Amtrak to ensure that the footbridge gets needed repairs.[15]

Station layout and services

Northeast Corridor

BWI Rail Station is located on Amtrak's Northeast Corridor, a Template:Convert rail line connecting Washington, D.C., Philadelphia, New York, and Boston. Amtrak's Northeast Regional, Acela Express, Crescent, Vermonter, and Palmetto, as well as the MARC Penn Line commuter rail service, stop at the station. Amtrak long distance trains, as well as some Northeast Regional and Acela Express trains, bypass the station.

The station appears in Amtrak timetables as BWI Thurgood Marshall Airport. Unlike most major stations along the Northeast Corridor, it is not possible to check bags to and from BWI; it is the busiest Amtrak station without checked baggage service.

Public transit services

File:Shuttle bus at BWI Rail Station, June 2007.jpg
An airport shuttle bus at the station

Pedestrian and bicycle access

  • BWI Trail: A walk/bike trail completely encircles the airport grounds parallel to the Airport Loop, and runs adjacent to the station.[17]
  • An elevated walkway connects the station (at the second floor of the southbound platform's stairwell) with office buildings on Corporate Center Drive, including the Maryland Department of Transportation headquarters.

References

Template:Reflist

External links

Template:Sister project Template:Amtrak web

Template:Amtrak Maryland stations Template:BWI Airport Template:MARC Train

  1. ↑ Script error: No such module "citation/CS1".
  2. ↑ Script error: No such module "citation/CS1".
  3. ↑ Script error: No such module "citation/CS1".
  4. ↑ Air-Rail Station To Open Amtrak News September 1, 1980, page 3
  5. ↑ Script error: No such module "citation/CS1".
  6. ↑ Script error: No such module "citation/CS1".
  7. ↑ Script error: No such module "citation/CS1".
  8. ↑ Script error: No such module "citation/CS1".
  9. ↑ Script error: No such module "citation/CS1".
  10. ↑ Script error: No such module "citation/CS1".
  11. ↑ a b Script error: No such module "citation/CS1".
  12. ↑ Script error: No such module "citation/CS1".
  13. ↑ Script error: No such module "citation/CS1".
  14. ↑ Script error: No such module "citation/CS1".
  15. ↑ a b Script error: No such module "citation/CS1".
  16. ↑ Script error: No such module "citation/CS1".
  17. ↑ Script error: No such module "citation/CS1".
Retrieved from "http://debianws.lexgopc.com/wiki143/index.php?title=BWI_Rail_Station&oldid=948432"