Synchronous virtual pipe

From Wikipedia, the free encyclopedia
This is the current revision of this page, as edited by imported>JCW-CleanerBot at 19:26, 22 May 2025 (→top: task, removed: (COMNET)). The present address (URL) is a permanent link to this version.
(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

When realizing pipeline forwarding[1] a predefined schedule for forwarding a pre-allocated amount of bytes during one or more time frames along a path of subsequent switches establishes a synchronous virtual pipe (SVP). The SVP capacity is determined by the total number of bits allocated in every time cycle for the SVP. For example, for a 10 ms time cycle, if 20,000 bits are allocated during each of 2 time frames, the SVP capacity is 4 Mbit/s.

Pipeline forwarding guarantees that reserved traffic, i.e., traveling on an SVP, experiences:

  1. bounded end-to-end delay,
  2. delay jitter lower than two TFs, and
  3. no congestion and resulting losses.

Two implementations of the pipeline forwarding were proposed: time-driven switching (TDS) [2] and time-driven priority (TDP) [3] and can be used to create pipeline forwarding parallel network in the future Internet.[4]

References

<templatestyles src="Reflist/styles.css" />

  1. ↑ Script error: No such module "citation/CS1".Script error: No such module "Unsubst".Template:Cbignore
  2. ↑ Script error: No such module "citation/CS1".
  3. ↑ Script error: No such module "citation/CS1".
  4. ↑ Script error: No such module "citation/CS1".

Script error: No such module "Check for unknown parameters".