RAMDAC - Revision history

imported>Kvng: add link

2025-07-24T14:48:31Z

add link

← Previous revision		Revision as of 14:48, 24 July 2025
Line 8:		Line 8:

	== History ==		== History ==
	[[file:IMS G171.jpg\|thumb\|IMS G171 RAMDAC on ~~the~~ VGA ~~board~~]]		[[file:IMS G171.jpg\|thumb\|IMS G171 RAMDAC on a [[VGA adapter]]]]

	The term ''RAMDAC'' did not enter into common PC-terminology until [[IBM]] introduced the IBM [[~~Video Graphics Array~~\|VGA]] ~~display adapter~~ in 1987. The IBM VGA adapter used the [[INMOS]] G171 RAMDAC. The INMOS VGA RAMDAC was a separate chip, featured a 256-color (8-bit CLUT) display from a palette of {{val\|262144\|fmt=commas}} possible values, and supported pixel-rates up to approximately 30{{nbsp}}Mpix/s.<ref>{{cite web \|url=https://www.computer.org/publications/tech-news/chasing-pixels/Famous-Graphics-Chips-IBMs-VGA \|title=Famous Graphics Chips: IBM’s VGA \|access-date=2024-04-13}}</ref>		The term ''RAMDAC'' did not enter into common PC-terminology until [[IBM]] introduced the IBM [[VGA adapter\|VGA display adapter]] in 1987. The IBM VGA adapter used the [[INMOS]] G171 RAMDAC. The INMOS VGA RAMDAC was a separate chip, featured a 256-color (8-bit CLUT) display from a palette of {{val\|262144\|fmt=commas}} possible values, and supported pixel-rates up to approximately 30{{nbsp}}Mpix/s.<ref>{{cite web \|url=https://www.computer.org/publications/tech-news/chasing-pixels/Famous-Graphics-Chips-IBMs-VGA \|title=Famous Graphics Chips: IBM’s VGA \|access-date=2024-04-13}}</ref>

	As clone manufacturers copied IBM VGA hardware, they also copied the INMOS VGA RAMDAC. Advances in semiconductor manufacturing and PC processing power allowed RAMDACs to add ''direct-color'' operation, which is a mode of operation that allows the [[Super Video Graphics Array\|SVGA]]-controller to pass a pixel's color value directly to the DAC-inputs, thereby bypassing the RAM lookup-table. Another innovation was Edsun's CEGDAC, which featured hardware-assisted [[spatial anti-aliasing]] for line/vector draw operations.		As clone manufacturers copied IBM VGA hardware, they also copied the INMOS VGA RAMDAC. Advances in semiconductor manufacturing and PC processing power allowed RAMDACs to add ''direct-color'' operation, which is a mode of operation that allows the [[Super Video Graphics Array\|SVGA]]-controller to pass a pixel's color value directly to the DAC-inputs, thereby bypassing the RAM lookup-table. Another innovation was Edsun's CEGDAC, which featured hardware-assisted [[spatial anti-aliasing]] for line/vector draw operations.

imported>Rentangan: improved wikitext

2025-06-24T22:32:08Z

improved wikitext

← Previous revision		Revision as of 22:32, 24 June 2025
Line 10:		Line 10:
	[[file:IMS G171.jpg\|thumb\|IMS G171 RAMDAC on the VGA board]]		[[file:IMS G171.jpg\|thumb\|IMS G171 RAMDAC on the VGA board]]

	The term ''RAMDAC'' did not enter into common PC-terminology until [[IBM]] introduced the IBM [[Video Graphics Array\|VGA]] display adapter in 1987. The IBM VGA adapter used the [[INMOS]] G171 RAMDAC. The INMOS VGA RAMDAC was a separate chip, featured a 256-color (8-bit CLUT) display from a palette of {{val\|262144\|fmt=commas}} possible values, and supported pixel-rates up to approximately 30{{nbsp}}Mpix/s.<ref>{{cite web \|url=https://www.computer.org/publications/tech-news/chasing-pixels/Famous-Graphics-Chips-IBMs-VGA \|title=Famous Graphics Chips: IBM’s VGA \|access-date=2024-04-13}}</ref>		The term ''RAMDAC'' did not enter into common PC-terminology until [[IBM]] introduced the IBM [[Video Graphics Array\|VGA]] display adapter in 1987. The IBM VGA adapter used the [[INMOS]] G171 RAMDAC. The INMOS VGA RAMDAC was a separate chip, featured a 256-color (8-bit CLUT) display from a palette of {{val\|262144\|fmt=commas}} possible values, and supported pixel-rates up to approximately 30{{nbsp}}Mpix/s.<ref>{{cite web \|url=https://www.computer.org/publications/tech-news/chasing-pixels/Famous-Graphics-Chips-IBMs-VGA \|title=Famous Graphics Chips: IBM’s VGA \|access-date=2024-04-13}}</ref>

	As clone manufacturers copied IBM VGA hardware, they also copied the INMOS VGA RAMDAC. Advances in semiconductor manufacturing and PC processing power allowed RAMDACs to add ''direct-color'' operation, which is a mode of operation that allows the [[Super Video Graphics Array\|SVGA]]-controller to pass a pixel's color value directly to the DAC-inputs, thereby bypassing the RAM lookup-table. Another innovation was Edsun's CEGDAC, which featured hardware-assisted [[spatial anti-aliasing]] for line/vector draw operations.		As clone manufacturers copied IBM VGA hardware, they also copied the INMOS VGA RAMDAC. Advances in semiconductor manufacturing and PC processing power allowed RAMDACs to add ''direct-color'' operation, which is a mode of operation that allows the [[Super Video Graphics Array\|SVGA]]-controller to pass a pixel's color value directly to the DAC-inputs, thereby bypassing the RAM lookup-table. Another innovation was Edsun's CEGDAC, which featured hardware-assisted [[spatial anti-aliasing]] for line/vector draw operations.

	By the early 1990s, the PC chip industry had advanced to the point where RAMDACs were integrated into the [[display controller]] chip, thus reducing the number of discrete chips and the cost of video cards. Consequently, the market for standalone RAMDACs disappeared. The display controller chip itself may be mounted on an add-in-board or integrated into the motherboard core-logic chipset.		By the early 1990s, the PC chip industry had advanced to the point where RAMDACs were integrated into the [[display controller]] chip, thus reducing the number of discrete chips and the cost of video cards. Consequently, the market for standalone RAMDACs disappeared. The display controller chip itself may be mounted on an add-in-board or integrated into the motherboard core-logic chipset.
Line 19:		Line 19:

	== Design ==		== Design ==
	The size of each DAC of the RAMDAC is 6 to 10 [[bit]]s. The SRAM's word length must be at least three times as large as the size of each DAC. The SRAM ~~acts as~~ a [[CLUT\|color lookup table]] (CLUT). It usually has 256 entries (and thus an [[8-bit]] address). If the DAC's word length is also 8 bits, we have a 256{{nbsp}}× [[24-bit color\|24-bit]] SRAM which allows a selection of 256 out of {{val\|16777216\|fmt=commas}} (16.7 million) possible colors for the display.<ref name="FOLDOC" /> The contents of this SRAM can be altered when no pixel needs to be generated for transmission to the display, which occurs during the [[vertical blanking interval]] between every [[Video frame\|frame]].		The size of each DAC of the RAMDAC is 6 to 10 [[bit]]s. The SRAM's word length must be at least three times as large as the size of each DAC. The SRAM holds a [[CLUT\|color lookup table]] (CLUT). It usually has 256 entries (and thus an [[8-bit]] address). If the DAC's word length is also 8 bits, we have a 256{{nbsp}}× [[24-bit color\|24-bit]] SRAM which allows a selection of 256 out of {{val\|16777216\|fmt=commas}} (16.7 million) possible colors for the display.<ref name="FOLDOC" /> The contents of this SRAM can be altered when no pixel needs to be generated for transmission to the display, which occurs during the [[vertical blanking interval]] between every [[Video frame\|frame]].

	The SRAM can usually be bypassed and the DACs can be fed color directly by display data, for [[Color depth#True color (24-bit)\|~~True~~ color]] modes. ~~In fact this has become very much~~ the normal mode of operation ~~of a RAMDAC~~ since the mid-1990s, so the programmable palette is mostly retained only as a legacy feature to ensure compatibility with ~~old~~ software. ~~In many newer~~ graphics cards, the RAMDAC ~~can be clocked~~ much faster in true color modes, when only the DAC part without the SRAM is used.		The SRAM can usually be bypassed and the DACs can be fed color directly by display data, for [[Color depth#True color (24-bit)\|true color]] modes. This became the normal mode of operation since the mid-1990s, so the programmable palette was mostly retained only as a legacy feature to ensure compatibility with older software. Many later [[graphics cards]] could clock the RAMDAC much faster in true color modes, when only the DAC part without the SRAM is used.

	~~A quick estimation on the~~ pixel clock for a given output can be ~~found~~ with:<ref name="vesa"/>		=== Clock rate ===
			The pixel clock rate for a given output can be estimated with:<ref name="vesa"/>

	: Pixels, horizontally, per line × lines, vertically, per display × 1.4 (factor ~~in any~~ blanking) × ~~rate of display updates (~~refresh rate)		: [Pixels, horizontally, per line] × [lines, vertically, per display] × [1.4 factor for blanking] × {{bracket\|[[refresh rate]]}}.

	The ability to drive transitions for sharp edges usually incurs, for the RAMDAC, a significant requirement in excess of the pixel clock.		The ability to drive transitions for sharp edges usually incurs, for the RAMDAC, a significant requirement in excess of the pixel clock.

	As of 2006, the DAC of a ~~modern~~ graphics card ~~runs~~ at a [[clock rate]] of 400{{nbsp}}[[MHz]]. ~~However, [[video card]]s based on the~~ [[XGI Technology\|XGI]] Volari XP10 ~~run~~ at 420 MHz DAC. The highest documented DAC frequency ever achieved on a production video card for the PC platform is 550 MHz, set by BarcoMed 5MP2 Aura 76Hz by [[Barco (manufacturer)\|Barco]].<ref name="barco"/>		As of 2006, the DAC of a graphics card ran at a [[clock rate]] of 400 [[MHz]]. The [[XGI Technology\|XGI]] Volari XP10 from 2006 ran at 420 MHz DAC. The highest documented DAC frequency ever achieved on a production video card for the PC platform is 550 MHz, set by BarcoMed 5MP2 Aura 76Hz by [[Barco (manufacturer)\|Barco]].<ref name="barco"/>

	== References ==		== References ==

imported>Em3rgent0rdr: /* History */ "Modern" is dated. Nowadays almost all display interfaces are digital, and it is rare to even have an analog video output. So adding that is obsolete. Hardware overlay is tangential and off topic, so deleting.

2025-06-20T06:26:33Z

History: "Modern" is dated. Nowadays almost all display interfaces are digital, and it is rare to even have an analog video output. So adding that is obsolete. Hardware overlay is tangential and off topic, so deleting.

← Previous revision		Revision as of 06:26, 20 June 2025
Line 14:		Line 14:
	As clone manufacturers copied IBM VGA hardware, they also copied the INMOS VGA RAMDAC. Advances in semiconductor manufacturing and PC processing power allowed RAMDACs to add ''direct-color'' operation, which is a mode of operation that allows the [[Super Video Graphics Array\|SVGA]]-controller to pass a pixel's color value directly to the DAC-inputs, thereby bypassing the RAM lookup-table. Another innovation was Edsun's CEGDAC, which featured hardware-assisted [[spatial anti-aliasing]] for line/vector draw operations.		As clone manufacturers copied IBM VGA hardware, they also copied the INMOS VGA RAMDAC. Advances in semiconductor manufacturing and PC processing power allowed RAMDACs to add ''direct-color'' operation, which is a mode of operation that allows the [[Super Video Graphics Array\|SVGA]]-controller to pass a pixel's color value directly to the DAC-inputs, thereby bypassing the RAM lookup-table. Another innovation was Edsun's CEGDAC, which featured hardware-assisted [[spatial anti-aliasing]] for line/vector draw operations.

	By the early 1990s, the PC chip industry had advanced to the point where RAMDACs were integrated into the display controller chip, thus reducing the number of discrete chips and the cost of video cards. Consequently, the market for standalone RAMDACs disappeared.		By the early 1990s, the PC chip industry had advanced to the point where RAMDACs were integrated into the [[display controller]] chip, thus reducing the number of discrete chips and the cost of video cards. Consequently, the market for standalone RAMDACs disappeared. The display controller chip itself may be mounted on an add-in-board or integrated into the motherboard core-logic chipset.

	~~In modern PCs, the RAMDAC(s) are integrated into the display controller chip, which itself may be mounted on an add-in-board or integrated into the motherboard core-logic chipset.~~ The original purpose of the RAMDAC, to provide a [[CLUT]]-based display mode, ~~is rarely used, having been~~ supplanted by True Color display modes. ~~However~~, ~~many [[Computer-aided design\|CAD]] and video editing applications use [[hardware overlay]]~~, ~~combined with~~ the ~~programmable palette, to ensure the user interface does not disrupt the rendering of the editing window~~.		The original purpose of the RAMDAC, to provide a [[CLUT]]-based display mode, was supplanted by True Color display modes. Eventually, as digital display interfaces became mainstream, the RAMDAC became obsolete.

	== Design ==		== Design ==

imported>Kvng: rv non-improvements. rm dated and unsourced.

2025-04-01T21:16:04Z

rv non-improvements. rm dated and unsourced.

New page

{{Short description|Color to analog voltage table}}
{{More citations needed|date=April 2024}}
[[file:HP-HP9000-EnvizeX-Terminal-SystemBoard-C2729-66501 06 (cropped) BT458LPJ135.jpg|thumb|A [[Brooktree]] RAMDAC]]

A '''RAMDAC''' ('''random-access memory digital-to-analog converter''') is a combination of three fast [[digital-to-analog converter]]s (DACs) with a small [[static random-access memory]] (SRAM) used in computer graphics [[display controller]]s or [[video cards]] to store the [[Palette (computing)|color palette]] and to generate the analog signals (usually a voltage amplitude) to drive a color [[Computer display|monitor]].<ref name="shen"/> The logical color number from the display memory is fed into the address inputs of the SRAM to select a palette entry to appear on the data output of the SRAM. This entry is composed of three separate values corresponding to the three components (red, green, and blue) of the desired physical color. Each component value is fed to a separate DAC, whose analog output goes to the monitor, and ultimately to one of its three [[electron gun]]s (or equivalent in non-[[CRT display]]s).<ref name="FOLDOC">{{foldoc|Random+Access+Memory+Digital-to-Analog+Converter}}</ref>

RAMDACs became [[obsolete]] as [[Digital Visual Interface|DVI]], [[High-Definition Multimedia Interface|HDMI]], [[DisplayPort]] and other digital interface technology became mainstream, which transfer video data digitally (via [[transition-minimized differential signaling]] or [[low-voltage differential signaling]]) and defer digital-to-analog conversion until the monitor's pixels are actuated.

== History ==
[[file:IMS G171.jpg|thumb|IMS G171 RAMDAC on the VGA board]]

The term ''RAMDAC'' did not enter into common PC-terminology until [[IBM]] introduced the IBM [[Video Graphics Array|VGA]] display adapter in 1987. The IBM VGA adapter used the [[INMOS]] G171 RAMDAC. The INMOS VGA RAMDAC was a separate chip, featured a 256-color (8-bit CLUT) display from a palette of {{val|262144|fmt=commas}} possible values, and supported pixel-rates up to approximately 30{{nbsp}}Mpix/s.<ref>{{cite web |url=https://www.computer.org/publications/tech-news/chasing-pixels/Famous-Graphics-Chips-IBMs-VGA |title=Famous Graphics Chips: IBM’s VGA |access-date=2024-04-13}}</ref>

As clone manufacturers copied IBM VGA hardware, they also copied the INMOS VGA RAMDAC. Advances in semiconductor manufacturing and PC processing power allowed RAMDACs to add ''direct-color'' operation, which is a mode of operation that allows the [[Super Video Graphics Array|SVGA]]-controller to pass a pixel's color value directly to the DAC-inputs, thereby bypassing the RAM lookup-table. Another innovation was Edsun's CEGDAC, which featured hardware-assisted [[spatial anti-aliasing]] for line/vector draw operations.

By the early 1990s, the PC chip industry had advanced to the point where RAMDACs were integrated into the display controller chip, thus reducing the number of discrete chips and the cost of video cards. Consequently, the market for standalone RAMDACs disappeared.

In modern PCs, the RAMDAC(s) are integrated into the display controller chip, which itself may be mounted on an add-in-board or integrated into the motherboard core-logic chipset. The original purpose of the RAMDAC, to provide a [[CLUT]]-based display mode, is rarely used, having been supplanted by True Color display modes. However, many [[Computer-aided design|CAD]] and video editing applications use [[hardware overlay]], combined with the programmable palette, to ensure the user interface does not disrupt the rendering of the editing window.

== Design ==
The size of each DAC of the RAMDAC is 6 to 10 [[bit]]s. The SRAM's word length must be at least three times as large as the size of each DAC. The SRAM acts as a [[CLUT|color lookup table]] (CLUT). It usually has 256 entries (and thus an [[8-bit]] address). If the DAC's word length is also 8 bits, we have a 256{{nbsp}}× [[24-bit color|24-bit]] SRAM which allows a selection of 256 out of {{val|16777216|fmt=commas}} (16.7 million) possible colors for the display.<ref name="FOLDOC" /> The contents of this SRAM can be altered when no pixel needs to be generated for transmission to the display, which occurs during the [[vertical blanking interval]] between every [[Video frame|frame]].

The SRAM can usually be bypassed and the DACs can be fed color directly by display data, for [[Color depth#True color (24-bit)|True color]] modes. In fact this has become very much the normal mode of operation of a RAMDAC since the mid-1990s, so the programmable palette is mostly retained only as a legacy feature to ensure compatibility with old software. In many newer graphics cards, the RAMDAC can be clocked much faster in true color modes, when only the DAC part without the SRAM is used.

A quick estimation on the pixel clock for a given output can be found with:<ref name="vesa"/>

: Pixels, horizontally, per line × lines, vertically, per display × 1.4 (factor in any blanking) × rate of display updates (refresh rate)

The ability to drive transitions for sharp edges usually incurs, for the RAMDAC, a significant requirement in excess of the pixel clock.

As of 2006, the DAC of a modern graphics card runs at a [[clock rate]] of 400{{nbsp}}[[MHz]]. However, [[video card]]s based on the [[XGI Technology|XGI]] Volari XP10 run at 420 MHz DAC. The highest documented DAC frequency ever achieved on a production video card for the PC platform is 550 MHz, set by BarcoMed 5MP2 Aura 76Hz by [[Barco (manufacturer)|Barco]].<ref name="barco"/>

== References ==
{{refs|refs=
<ref name="shen">{{Cite book|title=Modern processor design : fundamentals of superscalar processors|last=Shen|first=John Paul|last2=H. Lipasti|first2=Mikko|publisher=Waveland Press|year=2013|isbn=978-1478607830|location=Long Grove|pages=154|language=en|chapter=3|oclc=883168030}}</ref>
<ref name="vesa">[http://www.cs.unc.edu/Research/ootf/FAQs/Video/GTF_V1R1.xls VESA's GTF calculation sheet]</ref>
<ref name="barco">https://web.archive.org/web/20070527140116/http://www.barco.com/corporate/en/products/product_specs.asp?element=2600 </ref>
}}

== External links ==
* [http://whatis.techtarget.com/definition/RAMDAC-random-access-memory-digital-to-analog-converter RAMDAC (random access memory digital-to-analog converter)] / TechTarget, 2005
* [http://www.pcguide.com/ref/video/overRAMDAC-c.html The RAMDAC] / The PC Guide, 2001

[[Category:Graphics chips]]
[[Category:Graphics cards]]