View source for Runge–Kutta methods

{{Short description|Family of implicit and explicit iterative methods}}
[[File:Comparison of the Runge-Kutta methods for the differential equation (red is the exact solution).svg|thumb|upright=1.25|Comparison of the Runge-Kutta methods for the differential equation <math>y'=\sin(t)^2 \cdot y</math> (red is the exact solution)]]
{{Differential equations}}

In [[numerical analysis]], the '''Runge–Kutta methods''' ({{IPAc-en|lang|ˈ|r|ʊ|ŋ|ə|ˈ|k|ʊ|t|ɑː|audio=en-us-Runge-Kutta.ogg}} {{Respell|RUUNG|ə|KUUT|tah}}<ref>{{cite web |title=Runge-Kutta method |url=https://www.dictionary.com/browse/runge-kutta-method |website=[[Dictionary.com]] |access-date=4 April 2021 |language=en}}</ref>) are a family of [[Explicit and implicit methods|implicit and explicit]] iterative methods, [[List of Runge–Kutta methods|which include]] the [[Euler method]], used in [[temporal discretization]] for the approximate solutions of [[simultaneous nonlinear equations]].<ref>DEVRIES, Paul L.; HASBUN, Javier E. A first course in computational physics. Second edition. Jones and Bartlett Publishers: 2011. p. 215.</ref> These methods were developed around 1900 by the German mathematicians [[Carl Runge]] and [[Wilhelm Kutta]].

==The Runge–Kutta method==

[[File:Runge-Kutta slopes.svg|thumb|Slopes used by the classical Runge-Kutta method|alt=|300x300px]]
The most widely known member of the Runge–Kutta family is generally referred to as "RK4", the "classic Runge–Kutta method" or simply as "the Runge–Kutta method".

Let an [[initial value problem]] be specified as follows:

:<math> \frac{dy}{dt} = f(t, y), \quad y(t_0) = y_0. </math>

Here <math>y</math> is an unknown function (scalar or vector) of time <math>t</math>, which we would like to approximate; we are told that <math>\frac{dy}{dt}</math>, the rate at which <math>y</math> changes, is a function of <math>t</math> and of <math>y</math> itself. At the initial time <math>t_0</math> the corresponding <math>y</math> value is <math>y_0</math>. The function <math>f</math> and the [[initial conditions]] <math>t_0</math>,  <math>y_0</math> are given.

Now we pick a step-size ''h'' &gt; 0 and define:

:<math>\begin{align}
y_{n+1} &= y_n + \frac{h}{6}\left(k_1 + 2k_2 + 2k_3 + k_4 \right),\\
t_{n+1} &= t_n + h \\
\end{align}</math>

for ''n'' = 0, 1, 2, 3, ..., using<ref>{{harvnb|Press|Teukolsky|Vetterling|Flannery|2007|p=908}}; {{harvnb|Süli|Mayers|2003|p=328}}</ref>
:<math>
\begin{align}
 k_1 &= \ f(t_n, y_n), \\
 k_2 &= \ f\!\left(t_n + \frac{h}{2}, y_n + h \frac{k_1}{2}\right), \\ 
 k_3 &= \ f\!\left(t_n + \frac{h}{2}, y_n + h \frac{k_2}{2}\right), \\
 k_4 &= \ f\!\left(t_n + h, y_n + h k_3\right).
\end{align}
</math>
(''Note: the above equations have different but equivalent definitions in different texts.''<ref name=notation>{{harvtxt|Atkinson|1989|p=423}}, {{harvtxt|Hairer|Nørsett|Wanner|1993|p=134}}, {{harvtxt|Kaw|Kalu|2008|loc=§8.4}} and {{harvtxt|Stoer|Bulirsch|2002|p=476}} leave out the factor ''h'' in the definition of the stages. {{harvtxt|Ascher|Petzold|1998|p=81}}, {{harvtxt|Butcher|2008|p=93}} and {{harvtxt|Iserles|1996|p=38}} use the ''y'' values as stages.</ref>)

Here <math>y_{n+1}</math> is the RK4 approximation of <math>y(t_{n+1})</math>, and the next value (<math>y_{n+1}</math>) is determined by the present value (<math>y_n</math>) plus the [[weighted average]] of four increments, where each increment is the product of the size of the interval, ''h'', and an estimated slope specified by function ''f'' on the right-hand side of the differential equation.
* <math>k_1</math> is the slope at the beginning of the interval, using <math> y </math> ([[Euler's method]]);
* <math>k_2</math> is the slope at the midpoint of the interval, using <math> y </math> and <math> k_1 </math>;
* <math>k_3</math> is again the slope at the midpoint, but now using <math> y </math> and <math> k_2 </math>;
* <math>k_4</math> is the slope at the end of the interval, using <math> y </math> and <math> k_3 </math>.

In averaging the four slopes, greater weight is given to the slopes at the midpoint. If <math>f</math> is independent of <math>y</math>, so that the differential equation is equivalent to a simple integral, then RK4 is [[Simpson's rule]].<ref name="Süli 2003 328">{{harvnb|Süli|Mayers|2003|p=328}}</ref>

The RK4 method is a fourth-order method, meaning that the [[Truncation error (numerical integration)|local truncation error]] is [[Big O notation|on the order of]] <math>O(h^5)</math>, while the  [[Truncation error (numerical integration)|total accumulated error]] is on the order of <math>O(h^4)</math>.

In many practical applications the function <math>f</math> is independent of <math>t</math> (so called [[Autonomous system (mathematics)|autonomous system]], or time-invariant system, especially in physics), and their increments are not computed at all and not passed to function <math>f</math>, with only the final formula for <math>t_{n+1}</math> used.

==Explicit Runge–Kutta methods==
The family of [[Explicit and implicit methods|explicit]] Runge–Kutta methods is a generalization of the RK4 method mentioned above. It is given by
:<math> y_{n+1} = y_n + h \sum_{i=1}^s b_i k_i, </math>
where<ref>{{harvnb|Press|Teukolsky|Vetterling|Flannery|2007|p=907}}</ref>
:<math>
\begin{align}
 k_1 & = f(t_n, y_n), \\
 k_2 & = f(t_n+c_2h, y_n+(a_{21}k_1)h), \\
 k_3 & = f(t_n+c_3h, y_n+(a_{31}k_1+a_{32}k_2)h), \\
     & \ \ \vdots \\
 k_s & = f(t_n+c_sh, y_n+(a_{s1}k_1+a_{s2}k_2+\cdots+a_{s,s-1}k_{s-1})h).
\end{align}
</math>
:(''Note: the above equations may have different but equivalent definitions in some texts.''<ref name=notation />)

To specify a particular method, one needs to provide the integer ''s'' (the number of stages), and the coefficients ''a<sub>ij</sub>'' (for 1 ≤ ''j'' < ''i'' ≤ ''s''), ''b<sub>i</sub>'' (for ''i'' = 1, 2, ..., ''s'') and ''c<sub>i</sub>'' (for ''i'' = 2, 3, ..., ''s''). The matrix [''a<sub>ij</sub>''] is called the ''Runge–Kutta matrix'', while the ''b<sub>i</sub>'' and ''c<sub>i</sub>'' are known as the ''weights'' and the ''nodes''.<ref>{{harvnb|Iserles|1996|p=38}}</ref> These data are usually arranged in a mnemonic device, known as a ''Butcher tableau'' (after [[John C. Butcher]]):

:{| style="text-align: center" cellspacing="0" cellpadding="3"
| style="border-right:1px solid;" | <math> 0 </math>
|-
| style="border-right:1px solid;" | <math> c_2 </math> || <math> a_{21} </math>
|-
| style="border-right:1px solid;" | <math> c_3 </math> || <math> a_{31} </math> || <math> a_{32} </math>
|-
| style="border-right:1px solid;" | <math> \vdots </math> || <math> \vdots </math> || || <math> \ddots </math>
|-
| style="border-right:1px solid; border-bottom:1px solid;" | <math> c_s </math>
| style="border-bottom:1px solid;" | <math> a_{s1} </math>
| style="border-bottom:1px solid;" | <math> a_{s2} </math>
| style="border-bottom:1px solid;" | <math> \cdots </math>
| style="border-bottom:1px solid;" | <math> a_{s,s-1} </math> || style="border-bottom:1px solid;" |
|-
| style="border-right:1px solid;" | || <math> b_1 </math> || <math> b_2 </math> || <math> \cdots </math> || <math> b_{s-1} </math> || <math> b_s </math>
|}

A [[Taylor series]] expansion shows that the Runge–Kutta method is consistent if and only if
:<math>\sum_{i=1}^{s} b_{i} = 1.</math>
There are also accompanying requirements if one requires the method to have a certain order ''p'', meaning that the local truncation error is O(''h<sup>p</sup>''<sup>+1</sup>). These can be derived from the definition of the truncation error itself. For example, a two-stage method has order 2 if ''b''<sub>1</sub> + ''b''<sub>2</sub> = 1, ''b''<sub>2</sub>''c''<sub>2</sub> = 1/2, and ''b''<sub>2</sub>''a''<sub>21</sub> = 1/2.<ref name="Iserles 1996 39">{{harvnb|Iserles|1996|p=39}}</ref> Note that a popular condition for determining coefficients is <ref name="Iserles 1996 39"/>
:<math>\sum_{j=1}^{i-1} a_{ij} = c_i \text{ for } i=2, \ldots, s.</math>
This condition alone, however, is neither sufficient, nor necessary for consistency.
<ref>
As a counterexample, consider any explicit 2-stage Runge-Kutta scheme with <math>b_{1}=b_{2}=1/2</math> and <math>c_1</math> and <math>a_{21}</math> randomly chosen. This method is consistent and (in general) first-order convergent. On the other hand, the 1-stage method with <math>b_1=1/2</math> is inconsistent and fails to converge, even though it trivially holds that <math>\sum_{j=1}^{i-1} a_{ij} = c_i \text{ for } i=2, \ldots, s.</math>.
</ref>

In general, if an explicit <math>s</math>-stage Runge–Kutta method has order <math>p</math>, then it can be proven that the number of stages must satisfy <math>s \ge p</math> and if <math>p \ge 5</math>, then <math>s \ge p+1</math>.<ref>{{harvnb|Butcher|2008|p=187}}</ref>
However, it is not known whether these bounds are ''sharp'' in all cases. In some cases, it is proven that the bound cannot be achieved. For instance, Butcher proved that for <math>p>6</math>, there is no explicit method with <math>s=p+1</math> stages.<ref name="Butcher 1965 408">{{harvnb|Butcher|1965|p=408}}</ref> Butcher also proved that for <math>p>7</math>, there is no explicit Runge-Kutta method with <math>p+2</math> stages.<ref name="Butcher 1985">{{harvnb|Butcher|1985}}</ref> In general, however, it remains an open problem what the precise minimum number of stages <math>s</math> is for an explicit Runge–Kutta method to have order <math>p</math>. Some values which are known are:<ref>{{harvnb|Butcher|2008|pp=187–196}}</ref>
:<math>
\begin{array}{c|cccccccc}
p & 1 & 2 & 3 & 4 & 5 & 6 & 7 & 8 \\
\hline
\min s & 1 & 2 & 3 & 4 & 6 & 7 & 9 & 11
\end{array} 
</math>
The provable bound above then imply that we can not find methods of orders <math>p=1, 2, \ldots, 6</math> that require fewer stages than the methods we already know for these orders. The work of Butcher also proves that 7th and 8th order methods have a minimum of 9 and 11 stages, respectively.<ref name="Butcher 1965 408"/><ref name="Butcher 1985"/> An example of an explicit method of order 6 with 7 stages can be found in Ref.<ref>{{harvnb|Butcher|1964}}</ref> Explicit methods of order 7 with 9 stages<ref name="Butcher 1965 408"/> and explicit methods of order 8 with 11 stages<ref>{{harvnb|Curtis|1970|p=268}}</ref> are also known. See Refs.<ref>{{harvnb|Hairer|Nørsett|Wanner|1993|p=179}}</ref><ref>{{harvnb|Butcher|1996|p=247}}</ref> for a summary.

===Examples===
The RK4 method falls in this framework. Its tableau is<ref name="Süli 2003 352">{{harvnb|Süli|Mayers|2003|p=352}}</ref>

:{| style="text-align: center" cellspacing="0" cellpadding="3"
| style="border-right:1px solid;" | 0
|-
| style="border-right:1px solid;" | 1/2 || 1/2
|-
| style="border-right:1px solid;" | 1/2 || 0 || 1/2
|-
| style="border-right:1px solid; border-bottom:1px solid;" | 1 || style="border-bottom:1px solid;" | 0
| style="border-bottom:1px solid;" | 0 || style="border-bottom:1px solid;" | 1
| style="border-bottom:1px solid;" |
|-
| style="border-right:1px solid;" | || 1/6 || 1/3 || 1/3 || 1/6
|}

A slight variation of "the" Runge–Kutta method is also due to Kutta in 1901 and is called the 3/8-rule.<ref>{{harvtxt|Hairer|Nørsett|Wanner|1993|p=138}} refer to {{harvtxt|Kutta|1901}}.</ref> The primary advantage this method has is that almost all of the error coefficients are smaller than in the popular method, but it requires slightly more FLOPs (floating-point operations) per time step. Its Butcher tableau is

:{| style="text-align: center" cellspacing="0" cellpadding="3"
| style="border-right:1px solid;" | 0
|-
| style="border-right:1px solid;" | 1/3 || 1/3
|-
| style="border-right:1px solid;" | 2/3 || −1/3 || 1
|-
| style="border-right:1px solid; border-bottom:1px solid;" | 1 || style="border-bottom:1px solid;" | 1
| style="border-bottom:1px solid;" | −1 || style="border-bottom:1px solid;" | 1
| style="border-bottom:1px solid;" |
|-
| style="border-right:1px solid;" | || 1/8 || 3/8 || 3/8 || 1/8
|}

However, the simplest Runge–Kutta method is the (forward) [[Euler method]], given by the formula <math> y_{n+1} = y_n + hf(t_n, y_n) </math>. This is the only consistent explicit Runge–Kutta method with one stage. The corresponding tableau is

:{| style="text-align: center" cellspacing="0" cellpadding="3"
| width="10" style="border-right:1px solid; border-bottom:1px solid;" | 0
| width="10" style="border-bottom:1px solid;" |
|-
| style="border-right:1px solid;" | || 1
|}

===Second-order methods with two stages===
An example of a second-order method with two stages is provided by the explicit [[midpoint method]]:
:<math> y_{n+1} = y_n + hf\left(t_n+\frac{1}{2}h, y_n+\frac{1}{2}hf(t_n,\ y_n)\right). </math>
The corresponding tableau is

:{| style="text-align: center" cellspacing="0" cellpadding="3"
| style="border-right:1px solid;" | 0
|-
| style="border-right:1px solid; border-bottom:1px solid;" | 1/2 || style="border-bottom:1px solid;" | 1/2 || style="border-bottom:1px solid;" |
|-
| style="border-right:1px solid;" | || 0 || 1
|}

The midpoint method is not the only second-order Runge–Kutta method with two stages; there is a family of such methods, parameterized by α and given by the formula<ref>{{harvnb|Süli|Mayers|2003|p=327}}</ref>

:<math> y_{n+1} = y_n + h\bigl( (1-\tfrac1{2\alpha}) f(t_n, y_n) + \tfrac1{2\alpha} f(t_n + \alpha h, y_n + \alpha h f(t_n, y_n)) \bigr). </math>

Its Butcher tableau is

:{| style="text-align: center" cellspacing="0" cellpadding="8"
| style="border-right:1px solid;" | 0
|-
| style="border-right:1px solid; border-bottom:1px solid;" | <math>\alpha</math> || style="border-bottom:1px solid; text-align: center;" | <math>\alpha</math> || style="border-bottom:1px solid;" |
|-
| style="border-right:1px solid;" | || <math>(1-\tfrac1{2\alpha})</math> || <math>\tfrac1{2\alpha}</math>
|}

In this family, <math>\alpha=\tfrac12</math> gives the [[midpoint method]], <math>\alpha=1</math> is [[Heun's method]],<ref name="Süli 2003 328"/> and <math>\alpha=\tfrac23</math> is Ralston's method.

==Use==
As an example, consider the two-stage second-order Runge–Kutta method with α = 2/3, also known as [[Heun's method#Runge.E2.80.93Kutta method|Ralston method]]. It is given by the tableau

{| cellspacing="0" cellpadding="3"
| width="20" |  || style="border-right:1px solid;" | 0
|-
||| style="border-right:1px solid; border-bottom:1px solid;" | 2/3 || style="border-bottom:1px solid;" | 2/3
| style="border-bottom:1px solid;" |
|-
||| style="border-right:1px solid;" | || 1/4 || 3/4
|}

with the corresponding equations

:<math> \begin{align}
k_1 &= f(t_n,\ y_n), \\
k_2 &= f(t_n + \tfrac{2}{3}h,\ y_n + \tfrac{2}{3}h k_1), \\
y_{n+1} &= y_n + h\left(\tfrac{1}{4}k_1+\tfrac{3}{4}k_2\right).
\end{align} </math>

This method is used to solve the initial-value problem
:<math> \frac{dy}{dt} = \tan(y)+1,\quad y_0=1,\ t\in [1, 1.1]</math>
with step size ''h'' = 0.025, so the method needs to take four steps.

The method proceeds as follows:

{| cellpadding="8"
|-
| <math>t_0=1 \colon</math> || ||
|-
| || <math>y_0=1</math>
|-
| <math>t_1=1.025 \colon</math>
|-
| || <math>y_0 = 1</math> || <math>k_1=2.557407725</math> || <math>k_2 = f(t_0 + \tfrac23h ,\ y_0 + \tfrac23hk_1) = 2.7138981400</math>
|-
| ||  colspan=3 |<math>y_1=y_0+h(\tfrac14k_1 + \tfrac34k_2)=\underline{1.066869388}</math>
|-
| <math>t_2=1.05 \colon</math>
|-
| || <math>y_1 = 1.066869388</math> || <math>k_1=2.813524695</math> || <math>k_2 = f(t_1 + \tfrac23h ,\ y_1 + \tfrac23hk_1)</math>
|-
| ||  colspan=3 | <math>y_2=y_1+h(\tfrac14k_1 + \tfrac34k_2)=\underline{1.141332181}</math>
|-
| <math>t_3=1.075 \colon</math>
|-
| || <math>y_2 = 1.141332181</math> || <math>k_1=3.183536647</math> || <math>k_2 = f(t_2 + \tfrac23h ,\ y_2 + \tfrac23hk_1)</math>
|-
| ||  colspan=3 | <math>y_3=y_2+h(\tfrac14k_1 + \tfrac34k_2)=\underline{1.227417567}</math>
|-
| <math>t_4=1.1 \colon</math>
|-
| || <math>y_3 = 1.227417567 </math> || <math>k_1=3.796866512</math> || <math>k_2 = f(t_3 + \tfrac23h ,\ y_3 + \tfrac23hk_1)</math>
|-
| ||  colspan=3 | <math>y_4=y_3+h(\tfrac14k_1 + \tfrac34k_2)=\underline{1.335079087}.</math>
|}

The numerical solutions correspond to the underlined values.

==Adaptive Runge–Kutta methods==
Adaptive methods are designed to produce an estimate of the local truncation error of a single Runge–Kutta step. This is done by having two methods, one with order <math>p</math> and one with order <math>p - 1</math>. These methods are interwoven, i.e., they have common intermediate steps. Thanks to this, estimating the error has little or negligible computational cost compared to a step with the higher-order method.

During the integration, the step size is adapted such that the estimated error stays below a user-defined threshold: If the error is too high, a step is repeated with a lower step size; if the error is much smaller, the step size is increased to save time. This results in an (almost), optimal step size, which saves computation time. Moreover, the user does not have to spend time on finding an appropriate step size.

The lower-order step is given by
:<math> y^*_{n+1} = y_n + h\sum_{i=1}^s b^*_i k_i, </math>
where <math>k_i</math> are the same as for the higher-order method. Then the error is
:<math> e_{n+1} = y_{n+1} - y^*_{n+1} = h\sum_{i=1}^s (b_i - b^*_i) k_i, </math>
which is <math>O(h^p)</math>. 
The Butcher tableau for this kind of method is extended to give the values of <math>b^*_i</math>:

{| cellspacing="0" cellpadding="3"
| width="20" |  || style="border-right:1px solid;" | 0
|-
||| style="border-right:1px solid;" | <math> c_2 </math> || <math> a_{21} </math>
|-
||| style="border-right:1px solid;" | <math> c_3 </math> || <math> a_{31} </math> || <math> a_{32} </math>
|-
||| style="border-right:1px solid;" | <math> \vdots </math> || <math> \vdots </math> || || <math> \ddots </math>
|-
||| style="border-right:1px solid; border-bottom:1px solid;" | <math> c_s </math>
| style="border-bottom:1px solid;" | <math> a_{s1} </math>
| style="border-bottom:1px solid;" | <math> a_{s2} </math>
| style="border-bottom:1px solid;" | <math> \cdots </math>
| style="border-bottom:1px solid;" | <math> a_{s,s-1} </math> || style="border-bottom:1px solid;" |
|-
||| style="border-right:1px solid;" | || <math> b_1 </math> || <math> b_2 </math> || <math> \cdots </math> || <math> b_{s-1} </math> || <math> b_s </math>
|-
||| style="border-right:1px solid;" | || <math> b^*_1 </math> || <math> b^*_2 </math> || <math> \cdots </math> || <math> b^*_{s-1} </math> || <math> b^*_s </math>
|}

The [[Runge–Kutta–Fehlberg method]] has two methods of orders 5 and 4. Its extended Butcher tableau is:

{| cellspacing="0" cellpadding="3"
| width="20" |  || style="border-right:1px solid;" | 0
|-
||| style="border-right:1px solid;" | 1/4 || 1/4
|-
||| style="border-right:1px solid;" | 3/8 || 3/32 || 9/32
|-
||| style="border-right:1px solid;" | 12/13 || 1932/2197 || −7200/2197 || 7296/2197
|-
||| style="border-right:1px solid;" | 1 || 439/216 || −8 || 3680/513 || -845/4104
|-
||| style="border-right:1px solid; border-bottom:1px solid;" | 1/2 || style="border-bottom:1px solid;" | −8/27 || style="border-bottom:1px solid;" | 2 || style="border-bottom:1px solid;" | −3544/2565 || style="border-bottom:1px solid;" | 1859/4104 || style="border-bottom:1px solid;" | −11/40 || style="border-bottom:1px solid;" |
|-
||| style="border-right:1px solid;" | || 16/135 || 0 || 6656/12825 || 28561/56430 || −9/50 || 2/55
|-
||| style="border-right:1px solid;" | || 25/216 || 0 || 1408/2565 || 2197/4104 || −1/5 || 0
|}

However, the simplest adaptive Runge–Kutta method involves combining [[Heun's method]], which is order 2, with the [[Euler method]], which is order 1. Its extended Butcher tableau is:

{| cellspacing="0" cellpadding="3"
| width="20" |  || style="border-right:1px solid;" | 0
|-
||| style="border-right:1px solid; border-bottom:1px solid;" | 1 || style="border-bottom:1px solid;" | 1 || style="border-bottom:1px solid;" |
|-
||| style="border-right:1px solid;" | || 1/2 || 1/2
|-
||| style="border-right:1px solid;" | || 1 || 0
|}

Other adaptive Runge–Kutta methods are the [[Bogacki–Shampine method]] (orders 3 and 2), the [[Cash–Karp method]] and the [[Dormand–Prince method]] (both with orders 5 and 4).

==Nonconfluent Runge–Kutta methods==
A Runge–Kutta method is said to be ''nonconfluent'' <ref>{{harvnb|Lambert|1991|p=278}}</ref> if all the <math>c_i,\,i=1,2,\ldots,s</math> are distinct.

==Runge–Kutta–Nyström methods==

Runge–Kutta–Nyström methods are specialized Runge–Kutta methods that are optimized for second-order differential equations.<ref>{{cite journal |last1=Dormand |first1=J. R. |last2=Prince |first2=P. J. |title=New Runge–Kutta Algorithms for Numerical Simulation in Dynamical Astronomy |journal=Celestial Mechanics |date=October 1978 |volume=18 |issue=3 |pages=223–232|doi=10.1007/BF01230162 |bibcode=1978CeMec..18..223D |s2cid=120974351 }}</ref><ref>{{cite report | last=Fehlberg | first=E. | date = October 1974 | title = Classical seventh-, sixth-, and fifth-order Runge–Kutta–Nyström formulas with stepsize control for general second-order differential equations | publisher   = National Aeronautics and Space Administration | edition =NASA TR R-432 | location    =Marshall Space Flight Center, AL
}}</ref> A general Runge–Kutta–Nyström method for a second-order ODE system

<math display=block>
\ddot y_i = f_i (y_1, y_2, \ldots, y_n )
</math>

with order <math>s</math> is with the form 

<math display=block>\begin{cases}
g_i = y_m + c_i h {\dot y}_m + h^2 \sum_{j=1}^s a_{ij} f(g_j), & i=1,2,\ldots, s\\
y_{m+1} = y_{m} + h {\dot y}_m + h^2 \sum_{j=1}^s \bar{b}_j f(g_j) \\
{\dot y}_{m+1} = {\dot y}_m + h \sum_{j=1}^s b_j f(g_j)
\end{cases}</math>

which forms a Butcher table with the form

<math display=block>
\begin{array}{c|cccc}
c_1    & a_{11} & a_{12}& \dots & a_{1s}\\
c_2    & a_{21} & a_{22}& \dots & a_{2s}\\
\vdots & \vdots & \vdots& \ddots& \vdots\\
c_s    & a_{s1} & a_{s2}& \dots & a_{ss} \\
\hline
       & {\bar b}_1    & {\bar b}_2   & \dots & {\bar b}_s\\
       & b_1  & b_2 & \dots & b_s
\end{array} =
\begin{array}{c|c}
\mathbf{c}& \mathbf{A}\\
\hline
          & \mathbf{{\bar b}}^\top \\
          & \mathbf{b}^\top
\end{array}
</math>

Two fourth-order explicit RKN methods are given by the following Butcher tables:

<math display=block>
\begin{array}{c|ccc}
c_i & & a_{ij}  & \\
\frac{3+\sqrt{3}}{6} & 0 & 0 & 0 \\
\frac{3-\sqrt{3}}{6} & \frac{2-\sqrt{3}}{12} & 0 & 0 \\
\frac{3+\sqrt{3}}{6} & 0 & \frac{\sqrt{3}}{6} & 0 \\
\hline
\overline{b_i} & \frac{5-3 \sqrt{3}}{24} & \frac{3+\sqrt{3}}{12} & \frac{1+\sqrt{3}}{24} \\
\hline
b_i & \frac{3-2 \sqrt{3}}{12} & \frac{1}{2} & \frac{3+2 \sqrt{3}}{12}
\end{array}
</math>
<math display=block>
\begin{array}{c|ccc}
c_i & & a_{ij}  & \\
\frac{3-\sqrt{3}}{6} & 0 & 0 & 0 \\
\frac{3+\sqrt{3}}{6} & \frac{2+\sqrt{3}}{12} & 0 & 0 \\
\frac{3-\sqrt{3}}{6} & 0 & -\frac{\sqrt{3}}{6} & 0 \\
\hline
\overline{b_i} & \frac{5+3 \sqrt{3}}{24} & \frac{3-\sqrt{3}}{12} & \frac{1-\sqrt{3}}{24} \\
\hline
b_i & \frac{3+2 \sqrt{3}}{12} & \frac{1}{2} & \frac{3-2 \sqrt{3}}{12}
\end{array}
</math>

These two schemes also have the symplectic-preserving properties when the original equation is derived from a conservative classical mechanical system, i.e. when 

<math display=block>
f_i(x_1, \ldots, x_n ) = \frac{\partial V}{\partial x_i} (x_1, \ldots, x_n )
</math>

for some scalar function <math> V </math>. <ref>{{Cite journal |last1=Qin |first1=Meng-Zhao |last2=Zhu |first2=Wen-Jie |date=1991-01-01 |title=Canonical Runge-Kutta-Nyström (RKN) methods for second order ordinary differential equations |url=https://dx.doi.org/10.1016/0898-1221%2891%2990209-M |journal=Computers & Mathematics with Applications |volume=22 |issue=9 |pages=85–95 |doi=10.1016/0898-1221(91)90209-M |issn=0898-1221}}</ref>

==Implicit Runge–Kutta methods==
All Runge–Kutta methods mentioned up to now are [[explicit and implicit methods|explicit methods]]. Explicit Runge–Kutta methods are generally unsuitable for the solution of [[stiff equation]]s because their region of absolute stability is small; in particular, it is bounded.<ref>{{harvnb|Süli|Mayers|2003|pp=349–351}}</ref>
This issue is especially important in the solution of [[Numerical partial differential equations|partial differential equations]].

The instability of explicit Runge–Kutta methods motivates the development of implicit methods. An implicit Runge–Kutta method has the form

:<math> y_{n+1} = y_n + h \sum_{i=1}^s b_i k_i, </math>
where
:<math> k_i = f\left( t_n + c_i h,\ y_{n} + h \sum_{j=1}^s a_{ij} k_j \right), \quad i = 1, \ldots, s.</math> <ref>{{harvnb|Iserles|1996|p=41}}; {{harvnb|Süli|Mayers|2003|pp=351–352}}</ref>

The difference with an explicit method is that in an explicit method, the sum over ''j'' only goes up to ''i'' − 1. This also shows up in the Butcher tableau: the coefficient matrix <math>a_{ij}</math> of an explicit method is lower triangular. In an implicit method, the sum over ''j'' goes up to ''s'' and the coefficient matrix is not triangular, yielding a Butcher tableau of the form<ref name="Süli 2003 352"/>

:<math>
\begin{array}{c|cccc}
c_1    & a_{11} & a_{12}& \dots & a_{1s}\\
c_2    & a_{21} & a_{22}& \dots & a_{2s}\\
\vdots & \vdots & \vdots& \ddots& \vdots\\
c_s    & a_{s1} & a_{s2}& \dots & a_{ss} \\
\hline
       & b_1    & b_2   & \dots & b_s\\
       & b^*_1  & b^*_2 & \dots & b^*_s\\
\end{array} =

\begin{array}{c|c}
\mathbf{c}& A\\
\hline
          & \mathbf{b^T} \\
\end{array}
</math>
See [[#Adaptive Runge–Kutta methods|Adaptive Runge-Kutta methods above]] for the explanation of the <math>b^*</math> row.

The consequence of this difference is that at every step, a system of algebraic equations has to be solved. This increases the computational cost considerably. If a method with ''s'' stages is used to solve a differential equation with ''m'' components, then the system of algebraic equations has ''ms'' components. This can be contrasted with implicit [[linear multistep method]]s (the other big family of methods for ODEs): an implicit ''s''-step linear multistep method needs to solve a system of algebraic equations with only ''m'' components, so the size of the system does not increase as the number of steps increases.<ref name="Süli 2003 353">{{harvnb|Süli|Mayers|2003|p=353}}</ref>

===Examples===
The simplest example of an implicit Runge–Kutta method is the [[backward Euler method]]:

:<math>y_{n + 1} = y_n + h f(t_n + h,\ y_{n + 1}). \,</math>

The Butcher tableau for this is simply:

:<math>
\begin{array}{c|c}
1 & 1 \\
\hline
  & 1 \\
\end{array}
</math>

This Butcher tableau corresponds to the formulae

:<math> k_1 = f(t_n + h,\ y_n + h k_1) \quad\text{and}\quad y_{n+1} = y_n + h k_1, </math>

which can be re-arranged to get the formula for the backward Euler method listed above.

Another example for an implicit Runge–Kutta method is the [[trapezoidal rule (differential equations)|trapezoidal rule]]. Its Butcher tableau is:

:<math>
\begin{array}{c|cc}
0 & 0& 0\\
1 & \frac{1}{2}& \frac{1}{2}\\
\hline
  &  \frac{1}{2}&\frac{1}{2}\\
  & 1 & 0 \\
\end{array}
</math>

The trapezoidal rule is a [[collocation method]] (as discussed in that article). All collocation methods are implicit Runge–Kutta methods, but not all implicit Runge–Kutta methods are collocation methods.<ref>{{harvnb|Iserles|1996|pp=43–44}}</ref>

The [[Gauss–Legendre method]]s form a family of collocation methods based on [[Gauss quadrature]]. A Gauss–Legendre method with ''s'' stages has order 2''s'' (thus, methods with arbitrarily high order can be constructed).<ref>{{harvnb|Iserles|1996|p=47}}</ref> The method with two stages (and thus order four) has Butcher tableau:

:<math>
\begin{array}{c|cc}
\frac12 - \frac16 \sqrt3 & \frac14                  & \frac14 - \frac16 \sqrt3 \\
\frac12 + \frac16 \sqrt3 & \frac14 + \frac16 \sqrt3 & \frac14 \\
\hline
                         & \frac12                  & \frac12 \\
                         & \frac12+\frac12 \sqrt3   & \frac12-\frac12 \sqrt3
\end{array}
</math> <ref name="Süli 2003 353"/>

===Stability===
The advantage of implicit Runge–Kutta methods over explicit ones is their greater stability, especially when applied to [[stiff equation]]s. Consider the linear test equation <math> y' = \lambda y </math>. A Runge–Kutta method applied to this equation reduces to the iteration <math> y_{n+1} = r(h\lambda) \, y_n </math>, with ''r'' given by

:<math> r(z) = 1 + z b^T (I-zA)^{-1} e = \frac{\det(I-zA+zeb^T)}{\det(I-zA)}, </math> <ref>{{harvnb|Hairer|Wanner|1996|pp=40–41}}</ref>

where ''e'' stands for the vector of ones. The function ''r'' is called the ''stability function''.<ref>{{harvnb|Hairer|Wanner|1996|p=40}}</ref> It follows from the formula that ''r'' is the quotient of two polynomials of degree ''s'' if the method has ''s'' stages. Explicit methods have a strictly lower triangular matrix ''A'', which implies that det(''I'' − ''zA'') = 1 and that the stability function is a polynomial.<ref name="Iserles 1996 60">{{harvnb|Iserles|1996|p=60}}</ref>

The numerical solution to the linear test equation decays to zero if | ''r''(''z'') | < 1 with ''z'' = ''h''λ. The set of such ''z'' is called the ''domain of absolute stability''. In particular, the method is said to be [[Stiff equation#A-stability|absolute stable]] if all ''z'' with Re(''z'') < 0 are in the domain of absolute stability. The stability function of an explicit Runge–Kutta method is a polynomial, so explicit Runge–Kutta methods can never be A-stable.<ref name="Iserles 1996 60"/>

If the method has order ''p'', then the stability function satisfies <math> r(z) = \textrm{e}^z + O(z^{p+1}) </math> as <math> z \to 0 </math>. Thus, it is of interest to study quotients of polynomials of given degrees that approximate the exponential function the best. These are known as [[Padé approximant]]s. A Padé approximant with numerator of degree ''m'' and denominator of degree ''n'' is A-stable if and only if ''m'' ≤ ''n'' ≤ ''m'' + 2.<ref>{{harvnb|Iserles|1996|pp=62–63}}</ref>

The Gauss–Legendre method with ''s'' stages has order 2''s'', so its stability function is the Padé approximant with ''m'' = ''n'' = ''s''. It follows that the method is A-stable.<ref>{{harvnb|Iserles|1996|p=63}}</ref> This shows that A-stable Runge–Kutta can have arbitrarily high order. In contrast, the order of A-stable [[linear multistep method]]s cannot exceed two.<ref>This result is due to {{harvtxt|Dahlquist|1963}}.</ref>

==B-stability==
The ''A-stability'' concept for the solution of differential equations is related to the linear autonomous equation <math>y'=\lambda y</math>. {{harvtxt|Dahlquist|1963}} proposed the investigation of stability of numerical schemes when applied to nonlinear systems that satisfy a monotonicity condition. The corresponding concepts were defined as ''G-stability'' for multistep methods (and the related one-leg methods) and ''B-stability'' (Butcher, 1975) for Runge–Kutta methods. A Runge–Kutta method applied to the non-linear system <math>y'=f(y)</math>, which verifies <math>\langle f(y)-f(z),\ y-z \rangle\leq 0</math>, is called ''B-stable'', if this condition implies <math>\|y_{n+1}-z_{n+1}\|\leq\|y_{n}-z_{n}\|</math> for two numerical solutions.

Let <math>B</math>, <math>M</math> and <math>Q</math> be three <math>s\times s</math> matrices defined by
<math display=block>
\begin{align}
B & =\operatorname{diag}(b_1,b_2,\ldots,b_s), \\[4pt]
M & =BA+A^TB-bb^T, \\[4pt]
Q & =BA^{-1}+A^{-T}B-A^{-T}bb^TA^{-1}.
\end{align}
</math>
A Runge–Kutta method is said to be ''algebraically stable''<ref>{{harvnb|Lambert|1991|p=275}}</ref> if the matrices <math>B</math> and <math>M</math> are both non-negative definite. A sufficient condition for ''B-stability''<ref>{{harvnb|Lambert|1991|p=274}}</ref> is: <math>B</math> and <math>Q</math> are non-negative definite.

==Derivation of the Runge–Kutta fourth-order method==
In general a Runge–Kutta method of order <math>s</math> can be written as:
:<math>y_{t + h} = y_t + h \cdot \sum_{i=1}^s a_i k_i +\mathcal{O}(h^{s+1}),</math>
where:
:<math>k_i =\sum_{j = 1}^s \beta_{ij} f(k_j,\ t_n + \alpha_i h)</math>
are increments obtained evaluating the derivatives of <math>y_t</math> at the <math>i</math>-th order.

We develop the derivation<ref>{{cite web |last1=Lyu |first1=Ling-Hsiao |title=Appendix C. Derivation of the Numerical Integration Formulae |url=http://www.ss.ncu.edu.tw/~lyu/lecture_files_en/lyu_NSSP_Notes/Lyu_NSSP_AppendixC.pdf |website=Numerical Simulation of Space Plasmas (I) Lecture Notes |publisher=Institute of Space Science, National Central University |access-date=17 April 2022 |date=August 2016}}</ref> for the Runge–Kutta fourth-order method using the general formula with <math>s=4</math> evaluated, as explained above, at the starting point, the midpoint and the end point of any interval <math>(t,\ t +h)</math>; thus, we choose:

: <math>
\begin{align}
&\alpha_i & &\beta_{ij} \\
\alpha_1 &= 0 & \beta_{21} &= \frac{1}{2} \\
\alpha_2 &= \frac{1}{2} &  \beta_{32} &= \frac{1}{2} \\
\alpha_3 &= \frac{1}{2} &  \beta_{43} &= 1 \\
\alpha_4 &= 1 & &\\
\end{align}
</math>

and <math>\beta_{ij} = 0</math> otherwise. We begin by defining the following quantities:
:<math>\begin{align}
y^1_{t+h} &= y_t + hf\left(y_t,\ t\right) \\
y^2_{t+h} &= y_t + hf\left(y^1_{t+h/2},\ t+\frac{h}{2}\right) \\
y^3_{t+h} &= y_t + hf\left(y^2_{t+h/2},\ t+\frac{h}{2}\right)
\end{align}</math>
where <math>y^1_{t+h/2} = \dfrac{y_t + y^1_{t+h}}{2}</math> and <math>y^2_{t+h/2} = \dfrac{y_t + y^2_{t+h}}{2}. </math>
If we define:
:<math>\begin{align}
k_1 &= f(y_t,\ t) \\
k_2 &= f\left(y^1_{t+h/2},\ t + \frac{h}{2}\right) = f\left(y_t + \frac{h}{2} k_1,\ t + \frac{h}{2}\right) \\
k_3 &= f\left(y^2_{t+h/2},\ t + \frac{h}{2}\right) = f\left(y_t + \frac{h}{2} k_2,\ t + \frac{h}{2}\right) \\
k_4 &= f\left(y^3_{t+h},\ t + h\right) = f\left(y_t + h k_3,\ t + h\right)
\end{align}</math>
and for the previous relations we can show that the following equalities hold up to <math>\mathcal{O}(h^2)</math>:<math display=block>\begin{align}
k_2 &= f\left(y^1_{t+h/2},\ t + \frac{h}{2}\right) = f\left(y_t + \frac{h}{2} k_1,\ t + \frac{h}{2}\right) \\
&= f\left(y_t,\ t\right) + \frac{h}{2} \frac{d}{dt}f\left(y_t,\ t\right) \\
k_3 &= f\left(y^2_{t+h/2},\ t + \frac{h}{2}\right) = f\left(y_t + \frac{h}{2} f\left(y_t + \frac{h}{2} k_1,\ t + \frac{h}{2}\right),\ t + \frac{h}{2}\right) \\
&= f\left(y_t,\ t\right) + \frac{h}{2} \frac{d}{dt} \left[ f\left(y_t,\ t\right) + \frac{h}{2} \frac{d}{dt}f\left(y_t,\ t\right) \right] \\
k_4 &= f\left(y^3_{t+h},\ t + h\right) = f\left(y_t + h f\left(y_t + \frac{h}{2} k_2,\ t + \frac{h}{2}\right),\ t + h\right) \\
&= f\left(y_t + h f\left(y_t + \frac{h}{2} f\left(y_t + \frac{h}{2} f\left(y_t,\ t\right),\ t + \frac{h}{2}\right),\ t + \frac{h}{2}\right),\ t + h\right)  \\
&= f\left(y_t,\ t\right) + h \frac{d}{dt} \left[ f\left(y_t,\ t\right) + \frac{h}{2} \frac{d}{dt}\left[ f\left(y_t,\ t\right) + \frac{h}{2} \frac{d}{dt}f\left(y_t,\ t\right) \right]\right]
\end{align}</math>
where:<math display=block>\frac{d}{dt} f(y_t,\ t) = \frac{\partial}{\partial y} f(y_t,\ t) \dot y_t + \frac{\partial}{\partial t} f(y_t,\ t) = f_y(y_t,\ t) \dot y_t + f_t(y_t,\ t) := \ddot y_t</math>
is the total derivative of <math>f</math> with respect to time.

If we now express the general formula using what we just derived we obtain:<math display=block>\begin{align}
y_{t+h} = {} & y_t + h  \left\lbrace a \cdot f(y_t,\ t) + b \cdot \left[ f(y_t,\ t) + \frac{h}{2} \frac{d}{dt}f(y_t,\ t) \right] \right.+ \\
& {}+ c \cdot \left[ f(y_t,\ t) + \frac{h}{2} \frac{d}{dt} \left[ f\left(y_t,\ t\right) + \frac{h}{2} \frac{d}{dt}f(y_t,\ t) \right] \right] + \\
&{}+ d \cdot \left[f(y_t,\ t) + h \frac{d}{dt} \left[ f(y_t,\ t) + \frac{h}{2} \frac{d}{dt}\left[ f(y_t,\ t)
+ \left. \frac{h}{2} \frac{d}{dt}f(y_t,\ t) \right]\right]\right]\right\rbrace + \mathcal{O}(h^5) \\
= {} & y_t + a \cdot h f_t + b \cdot h f_t + b \cdot \frac{h^2}{2} \frac{df_t}{dt}   + c \cdot h f_t+ c \cdot \frac{h^2}{2} \frac{df_t}{dt} + \\
&{}+ c \cdot \frac{h^3}{4} \frac{d^2f_t}{dt^2} + d \cdot h f_t + d \cdot h^2 \frac{df_t}{dt} + d \cdot \frac{h^3}{2} \frac{d^2f_t}{dt^2} + d \cdot \frac{h^4}{4} \frac{d^3f_t}{dt^3} + \mathcal{O}(h^5)
\end{align}</math>

and comparing this with the [[Taylor series]] of <math>y_{t+h}</math> around <math>t</math>:<math display=block>\begin{align}
 y_{t+h} &= y_t + h \dot y_t + \frac{h^2}{2} \ddot y_t + \frac{h^3}{6} y^{(3)}_t + \frac{h^4}{24} y^{(4)}_t + \mathcal{O}(h^5) = \\
&= y_t + h f(y_t,\ t) + \frac{h^2}{2} \frac{d}{dt}f(y_t,\ t) + \frac{h^3}{6} \frac{d^2}{dt^2}f(y_t,\ t) + \frac{h^4}{24} \frac{d^3}{dt^3}f(y_t,\ t)
\end{align}</math>

we obtain a system of constraints on the coefficients:

:<math>
 \begin{cases}
 & a + b + c + d = 1 \\[6pt]
 & \frac{1}{2} b + \frac{1}{2} c  + d = \frac{1}{2} \\[6pt]
 & \frac{1}{4} c + \frac{1}{2} d = \frac{1}{6} \\[6pt]
 & \frac{1}{4} d = \frac{1}{24}
 \end{cases}</math>
which when solved gives <math>a = \frac{1}{6}, b = \frac{1}{3}, c = \frac{1}{3}, d = \frac{1}{6}</math> as stated above.

==See also==
* [[Euler's method]]
* [[List of Runge–Kutta methods]]
* [[Numerical ordinary differential equations|Numerical methods for ordinary differential equations]]
* [[Runge–Kutta method (SDE)]]
* [[General linear methods]]
* [[Lie group integrator]]

==Notes==
{{reflist|2}}

==References==
* {{Citation | last1=Runge | first1=Carl David Tolmé | author1-link=Carl David Tolmé Runge | title=Über die numerische Auflösung von Differentialgleichungen | publisher=[[Springer Science+Business Media|Springer]] | journal=Mathematische Annalen | volume=46 | number=2 | pages=167–178 | year=1895 |doi=10.1007/BF01446807| s2cid=119924854 | url=https://zenodo.org/record/2178704 }}.
* {{Citation | last1=Kutta | first1=Wilhelm | title=Beitrag zur näherungsweisen Integration totaler Differentialgleichungen | journal=Zeitschrift für Mathematik und Physik | volume=46 | pages=435–453 | year=1901|url=https://archive.org/details/zeitschriftfrma12runggoog/page/434/}}.
* {{Citation | last1=Ascher | first1=Uri M. | last2=Petzold | first2=Linda R.|author2-link=Linda Petzold | title=Computer Methods for Ordinary Differential Equations and Differential-Algebraic Equations | publisher=[[Society for Industrial and Applied Mathematics]] | location=Philadelphia | isbn=978-0-89871-412-8 | year=1998}}.
* {{Citation | last1=Atkinson | first1=Kendall A. | title=An Introduction to Numerical Analysis | publisher=[[John Wiley & Sons]] | location=New York | edition=2nd | isbn=978-0-471-50023-0 | year=1989}}.
* {{Citation| last1 = Butcher | first1 = John C. | author1-link=John C. Butcher | title=Coefficients for the study of Runge-Kutta integration processes | journal = Journal of the Australian Mathematical Society | doi=10.1017/S1446788700027932 | volume=3 | issue=2 |date=May 1963 | pages=185–201| doi-access=free }}.
* {{Citation| last1 = Butcher | first1 = John C. | author1-link=John C. Butcher | title=On Runge-Kutta processes of high order| journal = Journal of the Australian Mathematical Society | doi=10.1017/S1446788700023387| volume=4 | issue=2 |date=May 1964 | pages=179–194| doi-access=free }}
* {{Citation | last1=Butcher | first1=John C. | author1-link=John C. Butcher | title= A stability property of implicit Runge-Kutta methods| year=1975 |journal= BIT| volume= 15 | issue=4 |pages= 358–361 | doi=10.1007/bf01931672| s2cid=120854166 }}.
* {{Citation | last1=Butcher | first1=John C. | author1-link=John C. Butcher | title= Numerical methods for ordinary differential equations in the 20th century| year=2000 |journal= J. Comput. Appl. Math.| volume= 125 | issue=1–2 |pages= 1–29 | doi=10.1016/S0377-0427(00)00455-6 | bibcode=2000JCoAM.125....1B | doi-access=free }}.
* {{Citation | last1=Butcher | first1=John C. | author1-link=John C. Butcher | title=Numerical Methods for Ordinary Differential Equations | publisher=[[John Wiley & Sons]] | location=New York | isbn=978-0-470-72335-7 | year=2008}}.
* {{Citation | last1=Cellier | first1=F. | last2=Kofman | first2=E. | title=Continuous System Simulation | publisher=[[Springer Verlag]] | isbn=0-387-26102-8 | year=2006}}.
* {{Citation | last1=Dahlquist | first1=Germund | author1-link=Germund Dahlquist | title=A special stability problem for linear multistep methods | doi=10.1007/BF01963532 | year=1963 | journal=BIT | issn=0006-3835 | volume=3 | pages=27–43| hdl=10338.dmlcz/103497 | s2cid=120241743 | hdl-access=free }}.
* {{Citation | last1=Forsythe | first1=George E. | last2=Malcolm | first2=Michael A. | last3=Moler | first3=Cleve B. | title=Computer Methods for Mathematical Computations | publisher=[[Prentice-Hall]] | year = 1977}} (see Chapter 6).
* {{Citation | last1=Hairer | first1=Ernst | last2=Nørsett | first2=Syvert Paul | last3=Wanner | first3=Gerhard | title=Solving ordinary differential equations I: Nonstiff problems | publisher=[[Springer-Verlag]] | location=Berlin, New York | isbn=978-3-540-56670-0 | year=1993}}.
* {{Citation | last1=Hairer | first1=Ernst | last2=Wanner | first2=Gerhard | title=Solving ordinary differential equations II: Stiff and differential-algebraic problems | publisher=[[Springer-Verlag]] | location=Berlin, New York | edition=2nd | isbn=978-3-540-60452-5 | year=1996}}.
* {{Citation | last1=Iserles | first1=Arieh | author1-link=Arieh Iserles | title=A First Course in the Numerical Analysis of Differential Equations | publisher=[[Cambridge University Press]] | isbn=978-0-521-55655-2 | year=1996| bibcode=1996fcna.book.....I }}.
* {{Citation|last1=Lambert|first1=J.D| title=Numerical Methods for Ordinary Differential Systems. The Initial Value Problem | publisher=[[John Wiley & Sons]]|year=1991 | isbn=0-471-92990-5}}
* {{Citation | last1=Kaw | first1=Autar | last2=Kalu | first2=Egwu | title=Numerical Methods with Applications | url=http://numericalmethods.eng.usf.edu/topics/textbook_index.html | publisher=autarkaw.com | edition=1st | year = 2008}}.
* {{Citation | last1=Press | first1=William H. | last2=Teukolsky | first2=Saul A. | author2-link=Saul Teukolsky | last3=Vetterling | first3=William T. | last4=Flannery | first4=Brian P. | title=Numerical Recipes: The Art of Scientific Computing | chapter=Section 17.1 Runge-Kutta Method | chapter-url=http://apps.nrbook.com/empanel/index.html#pg=907 | publisher=[[Cambridge University Press]] | edition=3rd | isbn=978-0-521-88068-8 | year=2007| title-link=Numerical Recipes }}. Also, [http://apps.nrbook.com/empanel/index.html#pg=910 Section 17.2. Adaptive Stepsize Control for Runge-Kutta].
* {{Citation | last1=Stoer | first1=Josef | last2=Bulirsch | first2=Roland | title=Introduction to Numerical Analysis | publisher=[[Springer-Verlag]] | location=Berlin, New York | edition=3rd | isbn=978-0-387-95452-3 | year=2002}}.
* {{Citation | last1=Süli | first1=Endre | last2=Mayers | first2=David | title=An Introduction to Numerical Analysis | publisher=[[Cambridge University Press]] | isbn=0-521-00794-1 | year=2003}}.
* {{Citation | last1=Tan | first1=Delin | last2=Chen | first2=Zheng | title=On A General Formula of Fourth Order Runge-Kutta Method | url=http://msme.us/2012-2-1.pdf | journal=Journal of Mathematical Science & Mathematics Education | volume=7 | issue=2 |pages = 1–10 |year = 2012}}.
* advance discrete maths ignou reference book (code- mcs033)
* John C. Butcher: "B-Series : Algebraic Analysis of Numerical Methods", Springer(SSCM, volume 55), {{ISBN|978-3030709556}} (April, 2021).
* {{Citation | last1=Butcher | first1=J.C. | title=The non-existence of ten stage eighth order explicit Runge-Kutta methods | url=https://link.springer.com/article/10.1007/BF01935372| journal=BIT Numerical Mathematics | volume=25 |pages = 521–540 |year = 1985| issue=3 | doi=10.1007/BF01935372 }}.
* {{Citation | last1=Butcher | first1=J.C. | title=On the attainable order of Runge-Kutta methods | url=https://www.ams.org/journals/mcom/1965-19-091/S0025-5718-1965-0179943-X/ | journal=Mathematics of Computation| volume=19 |pages = 408–417 |year = 1965| issue=91 | doi=10.1090/S0025-5718-1965-0179943-X }}.
* {{Citation | last1=Curtis | first1=A.R. | title=An eighth order Runge-Kutta process with eleven function evaluations per step | url=https://link.springer.com/article/10.1007/BF02219778 | journal=Numerische Mathematik| volume=16 |pages = 268–277 |year = 1970| issue=3 | doi=10.1007/BF02219778 }}.
* {{Citation | last1=Cooper | first1=G.J. | last2=Verner | first2=J.H. | title=Some Explicit Runge–Kutta Methods of High Order | url=https://epubs.siam.org/doi/abs/10.1137/0709037?journalCode=sjnaam | journal=SIAM Journal on Numerical Analysis| volume=9 | year = 1972| issue=3 | pages=389–405 | doi=10.1137/0709037 | bibcode=1972SJNA....9..389C }}.
* {{Citation | last1=Butcher | first1=J.C. | title=A History of Runge-Kutta Methods | url=https://dx.doi.org/10.1016/0168-9274%2895%2900108-5 | journal=Applied Numerical Mathematics | volume=20 | pages=247–260 | year = 1996| issue=3 | doi=10.1016/0168-9274(95)00108-5 }}.

==External links==
* {{springer|title=Runge-Kutta method|id=p/r082810}}
* [http://numericalmethods.eng.usf.edu/topics/runge_kutta_4th_method.html Runge–Kutta 4th-Order Method]
* [https://github.com/USNavalResearchLaboratory/TrackerComponentLibrary/tree/master/Mathematical_Functions/Differential_Equations Tracker Component Library Implementation in Matlab] — Implements 32 embedded Runge Kutta algorithms in <code>RungeKStep</code>, 24 embedded Runge-Kutta Nyström algorithms in <code>RungeKNystroemSStep</code> and 4 general Runge-Kutta Nyström algorithms in <code>RungeKNystroemGStep</code>.

{{Numerical integrators}}

{{DEFAULTSORT:Runge-Kutta methods}}
[[Category:Runge–Kutta methods| ]]
[[Category:Numerical differential equations]]
[[Category:Numerical analysis]]