View source for Psophometric weighting

[[Image:CCITT 0.41 and C-Message weighting curve.svg|400px|right]]
'''Psophometric weighting''' (from {{langx|el|ψόφος}} : psóphos "noise") refers to any [[weighting curve]] used in the measurement of noise. In the field of audio engineering it has a more specific meaning, referring to noise weightings used especially in measuring noise on telecommunications circuits. Key standards are [[ITU-T]] O.41<ref>[http://www.itu.int/rec/T-REC-O.41/en "Psophometer for use on telephone-type circuits"], ''ITU-T O.41'', October 1994</ref> and C-message weighting as shown here.

== Use ==

A major use of noise weighting is in the measurement of [[residual noise]] in audio equipment, usually present as hiss or hum in quiet moments of programme material. The purpose of weighting here is to emphasise the parts of the audible spectrum that ears perceive most readily, and attenuate the parts that contribute less to perception of loudness, in order to get a measured figure that correlates well with subjective effect.

== See also ==
*[[Audio system measurements]]
*[[Equal-loudness contour]]
*[[Fletcher–Munson curves]]
*[[Noise measurement]]
*[[Headroom (audio signal processing)|Headroom]]
*[[Psophometric voltage]]
*[[Rumble measurement]]
*[[ITU-R 468 noise weighting]]
*[[A-weighting]]
*[[Weighting filter]]
*[[Weighting]]
*[[Weighting curve]]

== References ==
{{reflist}}

{{telecommunications-stub}}

[[Category:Noise (electronics)]]