View source for Help:EasyTimeline syntax

{{Accessibility dispute|reason=Text is way too small and distorted to be legible at default size}}{{Wikipedia how-to|H:ET}}
The [[Wikipedia:EasyTimeline|EasyTimeline]] feature produces an embedded [[Help:Images and other uploaded files|image]] from wikitext. The image can be a one-dimensional diagram (horizontally or vertically), or a two-dimensional one. The name "EasyTimeline" refers to the possibility to apply the feature with a time scale horizontally or vertically, possibly with another parameter in the other direction, but there are also various other possibilities.

See also [[Wikipedia:Timeline]], [[mw:Extension:EasyTimeline]], <!--[http://stats.wikimedia.org/EN/TimelinesIndex.htm Gallery of graphical timelines], -->[[mw:Extension:EasyTimeline/syntax]], [[mw:Extension:EasyTimeline/installation|EasyTimeline activation on other MediaWiki installations]]

== Introduction ==
Graphical timelines can be produced by providing a script between special tags:
 <nowiki><timeline></nowiki>
 ''script''
 <nowiki></timeline></nowiki>

EasyTimeline will then be invoked to render a PNG image and (optionally) a clickable map.

'''Disclaimer''': Even though EasyTimeline is designed for ease of use, a complicated graphical timeline is a non-trivial affair.
A simple timeline may take half an hour to compose (or even less, when a suitable example is taken as a basis). Large timelines may take a few hours for composition and fine-tuning. However, adding to or correcting a timeline, no matter how complex, should be a relatively straightforward affair,
even for contributors who have no expert knowledge of the syntax described here.

Feel free to ask the [[m:User:Erik Zachte|author of EasyTimeline]] for advice.

== Available commands ==
The script commands define:
*Overall layout: [[#ImageSize .28mandatory.29|ImageSize]], [[#PlotArea .28mandatory.29|PlotArea]], [[#Colors|Colors]], [[#BackgroundColors|BackgroundColors]], [[#AlignBars|AlignBars]]
*Interpretation and presentation of dates and periods: [[#DateFormat|DateFormat]], [[#Period .28mandatory.29|Period]], [[#ScaleMajor|ScaleMajor]], [[#ScaleMinor|ScaleMinor]], [[#TimeAxis|TimeAxis]]
*Events, periods and descriptive texts: [[#PlotData|PlotData]], [[#TextData|TextData]]
*How to order, divide, and name groups of events and periods: [[#BarData|BarData]], [[#Legend|Legend]], [[#LineData|LineData]]
*Shorthands for pieces of script code that occur multiple times: [[#Define|Define]]

The following commands are mandatory: [[#ImageSize .28mandatory.29|ImageSize]], [[#PlotArea .28mandatory.29|PlotArea]], [[#Period .28mandatory.29|Period]] and [[#TimeAxis|TimeAxis]]. At least one of the following commands is required: [[#PlotData|PlotData]] and/or [[#TextData|TextData]]. Either or both can occur multiple times. All other commands are optional.

'''Case''': Commands and their attributes can be specified in lower, upper or mixed case. Please try to be consistent in applying case as this will further readability, e.g. use mixed case for all commands and lowercase for all attributes.
----

== General syntax rules ==
A script can contain commands and comments. Each command is followed by one or more attributes.

=== Commands ===
Commands should start on the first position of a line.
Some commands can be followed by multiple lines of data and/or options.
These extra lines should start with at least one space or be completely empty
(the latter is useful for visually grouping related data lines).

Commands have one of the following forms, depending on the type of
command:
{|
|
 '''''Command = attribute(s)'''''
|<pre>
DateFormat = dd/mm/yyyy
</pre>
|-
|
 '''''Command name = attribute(s)'''''
|<pre>
Color Jp = value:red legend:Japan
</pre>
|-
|
 '''''Command ='''''
   '''''attribute(s)'''''
   '''''attribute(s)'''''
   '''''etc.'''''
|<pre>
PlotData =
  fontsize:XS width:20
  bar:Japan from:start till:19/02/1945 color:JT
  bar:Japan from:19/02/1945 till:14/03/1945 color:AI
</pre>
|}
=== Comments ===
Single and multi line comments can be specified:
* Text following the hash sign '''#''' will be regarded as a comment
* Text between '''#>''' and '''<#''' will also be regarded as a comment. Comments can span multiple lines, when tagged this way.

<small>Examples:</small>
<pre>
Dateformat = dd/mm/yyyy # European date format

Period = from:01/09/1939 till:02/09/1945 #> this chart will show
   the complete duration of World War II <#
</pre>

=== Attributes ===
When several attributes can be specified for a certain command, they are
notated as 'name:value' pairs. When several values can be specified for
one attribute they have to be enclosed between parentheses.

<small>Examples:</small>
<pre>
AlignBars = justify
Color SB = value:rgb(0.8,0,0.7) legend:Sea_Battles
</pre>

==== Parameters vs data items ====
Most commands only accept attributes that are specified on the same line.

'''Data blocks:''' some commands, like [[#BarData|BarData]], [[#PlotData|PlotData]], [[#TextData|TextData]], [[#Colors|Colors]] expect a ''data block'' consisting of one or more ''data lines''. Data lines should start with one or more spaces. A data block is considered complete when a line
starting with a non-space is encountered, unless that non-space is the comment character #.
Since empty lines are ignored, they may be used to group related data lines within a block.

Attributes in a data block can conceptually be divided into ''parameters'' and ''data items''. Data blocks can contain parameters and data items intermingled.

'''Data items:''' in data lines attributes ''text'', ''from'', ''till'' and ''at'' always apply only to the line in which they occur.

'''Parameters:''' in data lines attributes like ''color'' and ''fontsize'' have different implications depending on the context. If these parameters occur on a line without data items, they set new defaults for the data lines that follow. If they appear on a line mixed with data items they apply only to that line, thus overruling a default that was previously set.

<small>Example:</small>

 <!-- all data start with space here to keep source formatting
      but in actual usage commands should be at start of line -->
<pre>
# In this example two sets of bars are drawn, in red and blue respectively,
# but in each set one bar (marking war periods) will be drawn in green.

PlotData =
  color:red fontsize:S                               # set defaults
  bar:USSR from:1919 till:1922 text:Lenin            # red bar
  bar:USSR from:1922 till:1953 text:Stalin           # red bar
  bar:USSR from:1939 till:1945 text:WWII color:green # green bar
  bar:USSR from:1953 till:1964 text:Krushchev        # red bar
  &nbsp;
  color:blue                                         # change default color
  bar:US from:1913 till:1921 text:Wilson             # blue bar
  bar:US from:1917 till:1918 text:WWI color:green    # green bar
  bar:US from:1921 till:1923 text:Harding            # blue bar

#> this multiline comment does not end command PlotData,
   even when the previous line does not start with a space<#

   bar:US from:1923 till:1929 text:Coolidge           # blue bar

TextData =                                           # now PlotData is considered complete
   tabs:...etc
</pre>

=== Special characters ===
*'''#''', '''#>''', '''<#''' (hash, hash+"greater than", "less than"+hash): see [[#Comments|Comments]]
*'''~''' (tilde) in texts means: line break
*'''^''' (caret) in texts means: tab
*'''_''' (underscore) in texts means: space
*'''$''' (dollar sign) precedes any user defined constant

----
== Command reference ==
For each command the valid attributes are listed. Some commands and/or
attributes are optional (O).

For some commands certain attributes are mutually exclusive (will be
explained where applicable).

=== AlignBars ===
Bars will always be drawn at equal distances.
This command specifies whether the bars should be spaced as much apart as possible, or some white
space should be reserved between the left/top side of the chart and the
first bar or between the last bar and the right/bottom side of the chart.

;early (default) : The first bar will be placed on the leftmost/topmost position of the chart ('glued' to the axis), leaving space between the last bar and right/bottom side of the chart.
;late : Opposite from ''early'': the last bar will be placed as far to the right/bottom side of the chart as possible, leaving space between the axis line (left/top side of chart) and the first bar.
;justify : The first and last bars will be placed as far apart as possible, leaving no empty space on either side of the chart. When only one bar is present, justify will be interpreted as "centered".

<small>Examples:</small>
<table border=0 cellpadding=5>
<tr bgcolor=#F0F0F0><td>&nbsp;</td>
<td colspan=3 align=center>'''TimeAxis = orientation:horizontal'''</td>
<td colspan=3 align=center>'''TimeAxis = orientation:vertical'''</td>
</tr>
<tr bgcolor=#F0F0F0>
<td>
'''Alignbars ='''
</td>
<td>
<timeline>
ImageSize  = width:90 height:120
PlotArea   = width:65 height:80 left:20 bottom:20
AlignBars  = early

DateFormat = yyyy
Period     = from:1 till:5
TimeAxis   = orientation:horizontal
ScaleMajor = unit:year increment:1 start:1

PlotData=
  color:red width:10
  bar:A from:start till:end
  bar:B from:start till:end
  bar:C from:start till:end
  bar:D from:start till:end

TextData=
  pos:(20,110) fontsize:M text:Early
</timeline>
</td>
<td>
<timeline>
ImageSize  = width:90 height:120
PlotArea   = width:65 height:80 left:20 bottom:20
AlignBars  = late

DateFormat = yyyy
Period     = from:1 till:5
TimeAxis   = orientation:horizontal
ScaleMajor = unit:year increment:1 start:1

PlotData=
  color:red width:10
  bar:A from:start till:end
  bar:B from:start till:end
  bar:C from:start till:end
  bar:D from:start till:end

TextData=
  pos:(20,110) fontsize:M text:Late
</timeline>
</td>
<td>
<timeline>
ImageSize  = width:90 height:120
PlotArea   = width:65 height:80 left:20 bottom:20
AlignBars  = justify

DateFormat = yyyy
Period     = from:1 till:5
TimeAxis   = orientation:horizontal
ScaleMajor = unit:year increment:1 start:1

PlotData=
  color:red width:10
  bar:A from:start till:end
  bar:B from:start till:end
  bar:C from:start till:end
  bar:D from:start till:end

TextData=
  pos:(20,110) fontsize:M text:Justify
</timeline>

<td>
<timeline>
ImageSize  = width:90 height:120
PlotArea   = width:65 height:80 left:20 bottom:20
AlignBars  = early

DateFormat = yyyy
Period     = from:1 till:5
TimeAxis   = orientation:vertical
ScaleMajor = unit:year increment:1 start:1

PlotData=
  color:red width:10
  bar:A from:start till:end
  bar:B from:start till:end
  bar:C from:start till:end
  bar:D from:start till:end

TextData=
  pos:(20,110) fontsize:M text:Early
</timeline>
</td>
<td>
<timeline>
ImageSize  = width:90 height:120
PlotArea   = width:65 height:80 left:20 bottom:20
AlignBars  = late

DateFormat = yyyy
Period     = from:1 till:5
TimeAxis   = orientation:vertical
ScaleMajor = unit:year increment:1 start:1

PlotData=
  color:red width:10
  bar:A from:start till:end
  bar:B from:start till:end
  bar:C from:start till:end
  bar:D from:start till:end

TextData=
  pos:(20,110) fontsize:M text:Late
</timeline>
</td>
<td>
<timeline>
ImageSize  = width:90 height:120
PlotArea   = width:65 height:80 left:20 bottom:20
AlignBars  = justify

DateFormat = yyyy
Period     = from:1 till:5
TimeAxis   = orientation:vertical
ScaleMajor = unit:year increment:1 start:1

PlotData=
  color:red width:10
  bar:A from:start till:end
  bar:B from:start till:end
  bar:C from:start till:end
  bar:D from:start till:end

TextData=
  pos:(20,110) fontsize:M text:Justify
</timeline>

</td>
</tr></table>

----

=== BackgroundColors ===
This command allows the specification of background colors for various parts of the chart.
Any color ''id''s specified should be defined first using [[#Colors|Colors]].
;canvas (O) : Specify a background color for the whole image.
;bars (O) : Specify a background color for all bars.

<small>Examples:</small>
<pre>
BackgroundColors = bars:darkgrey

BackgroundColors = canvas:lightgrey bars:darkgrey

BackgroundColors = canvas:lightgrey
</pre>

----
=== BarData ===
This is an optional command which if present determines which bars will be drawn on the chart and in which order.
If it is omitted then bars will be drawn in order of their appearance in command [[#PlotData|PlotData]].

For complex timelines with many bars, usage of this command is recommended:
*It will ease reordering of the displayed data.
*Bar names specified in [[#PlotData|PlotData]] can be validated against this list, thus preventing typing errors.

;bar : defines the bar id. Other commands (notably [[#PlotData|PlotData]]) will expect this id for reference. This will also be the label to be shown along the axis, unless attribute ''text'' is present. The bar id should not contain any spaces: use underscores instead, these will be converted to spaces, as with article titles.
;text (O) : When specified this specifies the text to be presented along the axis, instead of the bar id. See also rules for [[#Text input|text input]]. The text may include one embedded link (see '''Note 1''').
;link (O) : Specify a web link (see '''Note 1''') (URL). The label along the axis will be shown as a blue clickable link.

'''Notes'''
#Either use attribute ''link'', or an embedded link in attribute ''text'', not both.

<small>Examples:</small>
<pre>
BarData =
  bar:Japan
  bar:US       text:"United States"  # refer in PlotData to bar "US" but show "United States"
  bar:China    text:[[China]]        # label China will be shown as blue clickable link to the English Wikipedia article about China
</pre>

The following lines produce the same output (only reference in [[#PlotData|PlotData]] changes):
<pre>
bar:US            text:[[United_States]]

bar:US            text:"United States" link:http://www.wikipedia.org/wiki/United_States

bar:United_States                      link:http://www.wikipedia.org/wiki/United_States
</pre>
----

=== Colors ===
This command allows colors to be defined and coupled to an id (identification tag).
Other commands will refer to colors with the id specified here.
This command expects one or more color definitions, each on a separate indented line.

;id :Other commands will use this id to specify text, bar or background colors.
;value : Actual color definition. Color values can be either be specified as:
;* predefined color constant, for which 32 predefined color names are recognized (see the [http://ploticus.sourceforge.net/doc/color.html Ploticus color page] where all these constants are defined).
;* rgb (red,green,blue): specify 3 numbers between 0 (minimal) and 1 (maximal)
;* gray (value): specify a number between 0 (black) and 1 (white)
;legend (O) : Specifies the text that should be displayed in the legend for this color. If this attribute is omitted no entry will appear in the legend at all. See [[#Text input|Text input]] for rules.

<small>Example:</small>
<pre>
Colors =
  id:war       value:red   legend:War Period
  id:peace     value:blue  legend:Peace Time
  id:treaty    value:rgb(0.6,0,0.6)
  id:lightgrey value:gray(0.9)
  id:darkgrey  value:gray(0.1)
</pre>
----

=== DateFormat ===
This command defines how dates, specified in other commands, should be
interpreted.

Valid dateformats are:

;dd/mm/yyyy : Dates are interpreted as day/month/year
: '''Note''': this format is only allowed for dates starting from 01/01/1800
;mm/dd/yyyy : Dates are interpreted as month/day/year
: '''Note''': this format is only allowed for dates starting from 01/01/1800
;yyyy : this deals with [[integer]]s from -9999 to +9999

<small>Example:</small>
<pre>
DateFormat = mm/dd/yyyy
</pre>

----

=== Define ===
This command allows definition of text constants, i.e. shorthands for
pieces of script code that occur multiple times.
Text constants should always start with a '''$''' (dollar sign).

<small>Example:</small>
<pre>
Define $broad       = width:30
Define $narrow      = width:10
Define $bardefaults = $broad fontsize:S
</pre>

----

=== ImageSize (mandatory) ===
This command defines the overall size of the final image.
Specify values in [[#Measurements|absolute measurements]].
;width : Width of final image: maximum is 1600 pixels, minimum is 25
;height : Height of final image: maximum is 1200 pixels, minimum is 25

For maximum flexibility you can let the script calculate the height or width of the image, based on the number of bars and the amount in pixels to add per bar. Specify '''height:auto''' (for horizontal time axis) or '''width:auto''' (for vertical time axis).

This is especially helpful when the number of bars in a timeline is likely to change over time again and again. Or to ensure equal distances between bars in images with many narrow bars where differences in amount of white space would soon be noticed (see for a real example [[Template:Vocal and instrumental pitch ranges]]). Or to make sure several related timelines always use the same distance between bars, no matter how many bars each contains (see for a real example [[List of popes (graphical)]]). In short it is a good idea most of the time.

;barincrement : Amount in pixels that should be added to the image size for each bar specified (mandatory and only allowed in combination with width:auto or height:auto).

<small>Examples:</small>
<pre>
ImageSize = width:800 height:600

ImageSize = width:800 height:auto barincrement:30
</pre>

----

=== Legend ===
A legend will only be shown when this command is present.
There are several ways to define the appearance and position of the legend. Some attributes are mutually exclusive (see below).

;'''orientation''' (O) : Specify hor[izontal] or ver[tical] (default).
:''restriction'': orientation = 'horizontal' and position = 'right' are mutually exclusive
;'''position''' (O) : Defines placement of the legend relative to the chart area. Specify top, bottom (default) or right.
:''restriction'': orientation = 'horizontal' and position = 'right' are mutually exclusive
;'''columns''' (O) : Specify 1, 2, 3 or 4. When this attribute is omitted the number of columns is determined as follows:
*'''orientation horizontal''' : Attribute columns does not apply here. All entries will be on the same line.
*'''orientation vertical''' :
**'''position right''' : All entries will be in one column
**'''position top''' or '''bottom''' : The number of columns depends on the number of entries to be shown:<br/>1-5 entries: 1 column, 6-10 entries: 2 columns, 11 or more entries: 3 columns.

'''''Tip: you may consider omitting the following parameters at first, and only add them when defaults settings are not satisfactory.'''''

;'''columnwidth''' (O) : Defines the distance between columns. You can specify an [[#Measurements|absolute distance]] or a relative distance (as percentage of the page width).
:''restriction'': this parameter is ignored when columns = 1 is defined or implied.
;'''left''' (O) : Defines the distance between the left side of the legend and the left side of the page. You can specify an absolute distance or a relative distance (as percentage of the page width).
;'''top''' (O) : Defines the distance between the top of the legend and the bottom of the page. You can specify an absolute distance or a relative distance (as percentage of the page height).

<small>Examples:</small>
<pre>
Legend = orientation:vertical position:bottom columns:3 columnwidth:140

Legend = orientation:horizontal position:bottom

Legend = left:100 top:120 columns:3
</pre>

----

=== LineData ===
Some timelines extend over several clearly distinct periods.
A line demarcating these periods may serve as a visual aid.

;at : Draws a line perpendicular to the time axis (default at maximal length, see also below).<br />Specify the date/year where the line should be drawn, in compliance with the specified [[#DateFormat|DateFormat]].
;color : Specify the color in which the line should drawn.
:'''Note''': The color id specified should be defined first with command [[#Colors|Colors]].
;layer : Specify front or back (default). Defines whether the line should appear in front of or behind all time segment bars.
;width : specify value between 0.1 (very thin) and 10 (very thick)

Only in rare cases the following extra attributes may be needed for full flexibility:

'''Advanced positioning options'''

You can draw lines in any direction. The following options are available:
*'''Perpendicular to the time axis''' with arbitrary start and stop points: <code>'''at''':''date'' '''frompos''':''position'' '''tillpos''':''position''</code>
*'''Parallel to the time axis''' with arbitrary start and stop points <code>'''from''':''date'' '''till''':''date'' '''atpos''':''position''</code>
*'''In any direction''' with arbitrary start and stop points: <code>'''points''':(x1,y1)(x2,y2)</code>

Attributes '''at''', '''from''' and '''till''' expect a date or year, in compliance with the specified [[#DateFormat|DateFormat]].<br />
Attributes '''frompos''', '''tillpos''', '''atpos''' expect coordinates (e.g. pixels values)

<small>Example:</small>

<timeline>
ImageSize  = width:200 height:120
PlotArea   = left:20 right:10 top:10 bottom:20 
TimeAxis   = orientation:horizontal
AlignBars  = justify
Colors =
  id:gray1 value:gray(0.3) 
  id:gray2 value:gray(0.5) 
  id:gray3 value:gray(0.7) 
Period     = from:0 till:10
ScaleMajor = unit:year increment:1 start:0

PlotData =
  bar:X color:gray1 width:15
  from:start till:end
  bar:Y color:gray2
  from:start till:end 
  bar:Z color:gray3
  from:start till:end 


LineData =
  layer:front
  at:1                         color:yellow
  at:2                         color:orange  layer:back
  at:4  frompos:50 tillpos:105 color:green
  from:5 till:8 atpos:50       color:red
  points:(100,20)(170,105)     color:blue    width:3
</timeline>
<syntaxhighlight lang="unixconfig" line style="font-size:90%">
LineData =
  layer:front                                            # all lines in front of bars unless stated otherwise
  at:1                         color:yellow              # perpendicular to time axis full length
  at:2                         color:orange  layer:back  # perpendicular to time axis full length but behind bars
  at:4  frompos:50 tillpos:105 color:green               # perpendicular to time axis, with specified start and stop points
  from:5 till:8 atpos:50       color:red                 # parallel to time axis
  points:(100,20)(170,105)     color:blue    width:3     # from one arbitrary absolute position to another, extra thick  
</syntaxhighlight>
::: <small>''Note that in the above example those "absolute positions" are plotted in the context of'' <code>ImageSize  = width:200 height:120</code> ''and'' <code>PlotArea   = left:20 right:10 top:10 bottom:20</code>.</small>

----

=== Period (mandatory) ===
Defines the time period that will be displayed in the chart. Both parameters are mandatory. Specify dates in compliance with specified [[#DateFormat|DateFormat]].
;from : Timeline starts here. The specified value can be referenced as start in commands like [[#PlotData|PlotData]] and [[#TextData|TextData]].
;till : Time ends here. The specified value can be referenced as end in other commands.

<small>Example:</small>
<pre>
Period = from:01/09/1939 till:02/09/1945
</pre>

----

=== PlotArea (mandatory) ===
;width : Specify value in absolute or relative [[#Measurements|measurements]]. ('''do not use anymore''', see below)
;height : Specify value in absolute or relative measurements. ('''do not use anymore''', see below)
;left : Margin between left side of image and left side of plot area. Specify value in absolute or relative measurements.
;top : Margin between top of image and top of plot area. Specify value in absolute or relative measurements.
;right : Margin between right side of image and right side of plot area. Specify value in absolute or relative measurements.
;bottom : Margin between bottom of image and bottom of plot area. Specify value in absolute or relative measurements.

====width/height attributes====

These attributes are only retained for downward compatibility. Earlier a plot area could only be defined by its total ''width'' and ''height'', and ''left'' and ''bottom'' margins. Now you can specify all four margins, and are advised to do so, and not use ''width'' and ''height'' attributes anymore. The advantage is added flexibility: when you change the overall image size, you do not need to adjust the plotarea definition as well. This is even more important when the image size is calculated automatically (see [[#ImageSize (mandatory)|ImageSize]]).

====Example====
<syntaxhighlight lang="properties">
# e.g. extra space to the left and below the plot area for axis labels and legend

PlotArea = left:40 bottom:60 top:10 right:10 
</syntaxhighlight>

=== PlotData ===
Used to define bars (symbolizing a time period), and add text next to these bars on a specific position.

For texts which are not related to a certain period or date/year or which require extensive formatting use command [[#TextData|TextData]].

Attributes text, at, from and till always apply only to the line on which they occur. All other attributes, when not combined with one these four,
act as default for the remainder of the command block or until a new default is specified, and may be overruled for a single line. See Parameters vs Data Items for more info and an example.

PlotData accepts a lot of attributes, some of which are mutually
exclusive. These attributes can be grouped as follows:
*Positional attributes
*Bar related attributes
*Text attributes
*Marker attribute

==== Positional attributes ====
;at : Specifies at which date/year a text should be positioned. Depending on attribute '''align''' the text either starts, ends or is centered at this position. Use date/year format as specified in [[#DateFormat|DateFormat]] or specify ''start'' or ''end'' which refers to time frame defined by command [[#Period|Period]].
:'''NB''': This attribute cannot be combined with attributes '''from''' or '''till'''.
;from : Specifies at which date/year a bar should start. Use date/year format as specified in [[#DateFormat|DateFormat]] or specify ''start'' which refers to time frame defined by command Period.
:'''NB''': This attribute should be used in combination with attribute '''till''' and cannot be combined with attribute '''at'''.
;till : Specifies at which date/year a bar should end. Use date/year format as specified in DateFormat or specify ''end'' which refers to time frame defined by command Period.
:'''NB''': This attribute should be used in combination with attribute '''from''' and cannot be combined with attribute '''at'''.
;shift : Specifies a horizontal and vertical displacement in absolute [[#Measurements|measurements]] for a text. This allows:
:*Texts to be shifted to avoid overlaps
:*Placement of text beside a bar, instead of on top of it.

<small>Examples:</small>
<pre>
DateFormat = dd/mm/yyyy
Period = from:01/01/1939 till:02/09/1945
PlotData=
  width:15 
  bar:Japan from:01/09/1939 till:27/09/1940 color:green
  bar:Japan from:27/09/1940 till:19/02/1945 color:yellow
  bar:Japan from:19/02/1945 till:14/03/1945 color:blue
  bar:Japan from:02/09/1945 till:end        color:red

  at:07/12/1941 shift:(0,-2) text:"<-- Attack on Pearl Harbor"
</pre>

<timeline>
ImageSize  = width:500 height:50
PlotArea   = left:20 right:10 top:10 bottom:20 
TimeAxis   = orientation:horizontal
AlignBars  = justify
DateFormat = dd/mm/yyyy
Period = from:01/01/1939 till:02/09/1945
ScaleMajor = grid:red  unit:year  increment:1 start:01/01/1939
ScaleMinor = grid:blue unit:month increment:1 start:01/01/1939

PlotData=
  width:15 
  bar:Japan from:01/09/1939  till:27/09/1940 color:green
  bar:Japan from:27/09/1940 till:19/02/1945 color:yellow
  bar:Japan from:19/02/1945 till:14/03/1945 color:blue
  bar:Japan from:02/09/1945 till:end        color:red

  at:07/12/1941 shift:(0,-2) text:"<-- Attack on Pearl Harbor"
</timeline>

==== Bar-related attributes ====
;bar 
: Specifies to which bar all other attributes apply.
:When command [[#BarData|BarData]] has not been used, bars will be drawn in the order in which they occur in any [[#PlotData|PlotData]] data block. The id specified here will also be the text presented along the axis, next to the bar.
:When command BarData has been used, bars will presented in the order specified there, also the bar id specified here will be validated against that list. Also the text presented along the axis will depend on the definition in [[#BarData|BarData]].
;barset 
: Restarts the bar display "from the top", allowing multiple bars on the same line. 
: Syntax: <code>barset:name</code>
: Blank lines may be added to skip over lines that you do not wish to add to with declarations such as <code>at:1234</code> with no further attributes.
;color 
: Specifies the color is which the bar should be drawn.
:The color id specified should be defined first with command [[#Colors|Colors]].
;width 
: Specifies the width of the bar in absolute or relative [[#Measurements|measurements]].

<syntaxhighlight lang="ini" line linelinks="bar" highlight="11-15">
# Example of bar-related properties
BarData=
  bar:US text:United States
  bar:SB text:Sea Battles

Colors=
  id:US value:blue legend:United_States
  id:SB value:rgb(0.8,0,0.7) legend:Sea_Battles

PlotData=
  width:0.3                                                            # see note 1
  bar:SB     from:07/08/1942 till:09/02/1943 text:Guadalcanal color:SB # see note 2
  bar:US     from:start      till:end color:US                         # see note 3
  bar:Midway from:start      till:end color:US                         # see note 4
  bar:US     at:07/12/1941   text:7/12 Pearl Harbour                   # see note 5
</syntaxhighlight>
Notes:
# [[#bar-11|this line]] establishes a default bar width for the remainder of the data block
# [[#bar-12|this line]] specifies a bar to be drawn and a text to placed on it at the same time
# [[#bar-13|<code>bar:US</code>]] will be drawn before bar SB, even when specified after it, because command [[#BarData|BarData]] determines the sequence
# [[#bar-14|<code>bar:Midway</code>]] will be rejected because it is not declared with command [[#BarData|BarData]]
# [[#bar-15|the last line]] will not result in a bar being plotted, it merely specifies on which bar the text should be placed

==== Text attributes ====
;text : Defines a text that should be plotted on or near a bar. The anchor position can be defined either explicitly with attribute "<code>at</code>", or implicitly with attributes "<code>from</code>" and "<code>till</code>".
:In the latter case the text will be positioned in the middle of the defined bar segment. See also [[#Text input|Text Input]] for rules
:The text may include embedded links (see '''Notes 1 & 2''') for use in clickable maps.
;textcolor (O) : Defines the color of the text. The color id specified should be defined first with command [[#Colors|Colors]]. When not specified color black will be assumed.
;fontsize (O) : Specify a point size between 6 and 30, or (preferably) one of tags XS, S (default), M, L or XL. See [[#Font support|Font support]] for more details.
;align (O) : Specify center (default), left or right.
;link (O) : Specify a web link (see '''Note 1''') (URL) for use in clickable maps. The text will be shown as a blue clickable link.

'''Notes'''
#Either use attribute link, or an embedded link in attribute text, not both.
#On PNG images only one clickable link will be shown per text segment (text with line breaks (~) constitutes several segments).

<small>Example:</small>
<pre>
PlotData=
   bar:US at:07/12/1941 align:left textcolor:black fontsize:XS text:7/12 [[Pearl Harbour]]
</pre>

produces the same result as:

<pre>
PlotData=
   bar:US at:07/12/1941 align:left textcolor:black fontsize:XS text:"7/12 Pearl Harbour" link:http://www.wikipedia.org/wiki/Pearl_Harbour
</pre>

==== Marker attribute ====
;mark : Places a marker in a bar at the specified position. Specify as mark:(symbol, color). The only value for ''symbol'' supported to date is ''line''. The ''color'' id specified should be defined first with command [[#Colors|Colors]]. When not specified color black will be assumed.

<small>Example:</small>
<pre>
PlotData=
  bar:test width:15 color:red
  from:1900 till:2000
  at:1990 mark:(line,white)
</pre>

will be shown as:
<timeline>
ImageSize  = width:140 height:60
PlotArea   = width:100 height:30 left:20 bottom:30
TimeAxis   = orientation:horizontal
DateFormat = yyyy
Period     = from:1900 till:2000
AlignBars  = early
ScaleMajor = unit:year increment:50 start:1900 
Colors =
  id:canvas value:rgb(1,1,0.85)
BackgroundColors = canvas:canvas
PlotData =
  width:15 color:red
  bar:test from:1900 till:2000
  bar:test at:1990 mark:(line,white)
</timeline>

----

=== ScaleMajor ===
This command divides the timeline into smaller periods, either
* Graphically, through thin vertical or horizontal lines in the chart
* Textually, through stubs in the time axis, below or to the left of the chart
* Both graphically and textually

'''Note''': the orientation of the lines and/or placement of the stubs depends
on the orientation of the [[#TimeAxis|TimeAxis]].

;gridcolor (O) : Defines the color for the grid lines. When this attribute is omitted no grid lines will be drawn.
:'''Note''': The color id specified should be defined first with command [[#Colors|Colors]].
;unit (O) : Specifies the unit by which the grid spacing is incremented. Specify day, month or year (default).
:'''Note''': When [[#DateFormat|DateFormat]] yyyy is specified, only unit year is allowed.
;increment (O) : Specifies the numbers of units by which the grid spacing is incremented. Default is 1.
;start (O) : Specifies where the first grid line and/or stub should be displayed. Defaults to start of defined [[#Period|Period]].

<small>Examples:</small>
<pre>
ScaleMajor = gridcolor:red start:1940

ScaleMajor = gridcolor:red unit:month increment:3 start:01/09/1939
</pre>

----
=== ScaleMinor ===
This command defines a further subdivision of the timescale. See ScaleMajor for syntax .

<small>Example:</small>
<pre>
ScaleMajor = grid:red  unit:year  increment:1 start:01/01/1940
ScaleMinor = grid:blue unit:month increment:3 start:01/10/1939
</pre>

----
=== TextData ===
Used to define a text block that can be positioned anywhere on the chart.
;text : The actual text. See also [[#Text input|Text Input]] for rules. The text may include embedded links (see '''Notes 1 & 2''').
;pos : Defines the top-left corner of the text block in absolute or relative [[#Measurements|measurements]]. Define as ''pos:(x,y)''.
;link (O) : Specify a web link (see '''Note 1''') (URL) for use in clickable maps. The label along the axis will be shown as a blue clickable link.
;textcolor (O) : Defines the color of the text. The color id specified should be defined first using [[#Colors|Colors]]. When not specified, the color is black.
;fontsize (O) : Specify a point size between 6 and 30, or (preferably) one of tags '''XS''', '''S''' (default), '''M''', '''L''' or '''XL''' (see [[#Font support|Font support]] for more details).
;tabs (O) : Defines position and alignment for tab character: '''^''' (caret). Specify multiple tab settings as tabs: (''x<sup>1</sup>-a<sup>1</sup>,x<sup>2</sup>-a<sup>2</sup>,x<sup>3</sup>-a<sup>3</sup>'', etc..) where
:*''x<sup>n</sup>'' is the horizontal displacement in absolute measurements from the left side of the text
:*''a<sup>n</sup>'' is the alignment for the text segment (specify ''center'', ''left'' or ''right'')
;lineheight (O) : Defines spacing between consecutive lines in absolute measurements. Specify a value up to 40 pixels or 0.4in. When not specified a default lineheight will be based on the font size currently in use.
'''Notes''':
#Either use attribute ''link'', or an embedded link in attribute ''text'', not both.
#On PNG images only one clickable link will be shown per text segment (text with tabs (^) constitutes several segments). <!-- is this strictly relevant here? -->

<small>Example:</small>
<syntaxhighlight lang="moin">
TextData =
  pos:(20,67) textcolor:black fontsize:S
  tabs:(10-right,14-left,50-left,90-left,230-left)
  text:Germany,Italy and Japan sign [[Tripartite Pact]]
  text:^10^1944^1-22/7^Bretton Woods 44 nations establish
  text:^^^^^IMF and World Bank
</syntaxhighlight>
will be shown as:
<timeline font="unifont">
ImageSize = width:400 height:70
PlotArea  = width:400 height:70 left:0 bottom:0
TimeAxis  = orientation:vertical # dummy, required
Period    = from:0 till:1 # dummy, required
Colors    =
  id:canvas value:rgb(1,1,0.85)
BackgroundColors = canvas:canvas
TextData  =
  pos:(20,67) textcolor:black fontsize:S
  tabs:(10-right,14-left,50-left,90-left,230-left)
  text:Germany,Italy and Japan sign [[Tripartite Pact]]
  text:^10^1944^1-22/7^Bretton Woods 44 nations establish
  text:^^^^^IMF and World Bank
</timeline>

----

=== TimeAxis ===
Defines the orientation of the time axis, and textual representation of stubs along that axis.
;format (O) : Specify in which format dates should be presented along the time axis.
:Currently only format yyyy (default) is supported. More formats may follow.
;orientation (O) : Specify hor[izontal] (default) or ver[tical].
<small>Example:</small>
<pre>
TimeAxis = orientation:horizontal format:yyyy
</pre>

----

== Presets ==
Presets are a shorthand for often used settings. They save a few code lines and promote standardisation, but may be confusing, as the timeline script become less self documenting.

At the moment two presets are available:
*'''Preset = TimeVertical_OneBar_UnitYear''', which expands to
 PlotArea = left:45 right:10 top:10 bottom:10
 TimeAxis = orientation:vertical format:yyyy
 DateFormat = yyyy ;
 AlignBars = early
 ScaleMajor = unit:year
 ScaleMinor = unit:year
 PlotData =
 mark:(line,white) align:left fontsize:S width:20 shift:(20,0)
*'''Preset = TimeHorizontal_AutoPlaceBars_UnitYear''', which expands to
 ImageSize = height:auto barincrement:20
 PlotArea = left:25 right:25 top:15 bottom:30
 TimeAxis = orientation:horizontal format:yyyy
 Colors =
 id:canvas value:gray(0.7)
 id:grid1 value:gray(0.4)
 id:grid2 value:gray(0.2)
 BackgroundColors = canvas:canvas
 DateFormat = yyyy ;
 AlignBars = justify
 ScaleMajor = unit:year grid:grid1
 ScaleMinor = unit:year
 Legend = orientation:vertical left:35 top:130
 PlotData =
 align:left anchor:from fontsize:M width:15 shift:(4,-6) textcolor:black

== Input rules ==
{{anchor|Measurements}}
=== Scales for size and position ===
'''Absolute measures''' may be used for specifying sizes, positions and position shifts, measured in pixels.

<small>Example:</small>
<pre>
PlotArea = width:800 height:600 left:50 bottom:50
</pre>

'''Relative measures''' may be used for specifying sizes and positions. Specify a number between 0 and 100, immediately followed by a %
(percentage) sign. For horizontal measurements the percentage is related to image width, for vertical measurements to image height.

The first coordinate is horizontal from left to right, the second is vertically upward.

<small>Example:</small>
<pre>
PlotArea = width:80% height:80% left:10% bottom:5%
</pre>

=== Text input ===
Text input is subject to a few rules:

:1). Only a subset of [[Unicode]] is allowed for font rendering, but Unicode in links should work for all characters. See also [[#Font support|Font support]].

:2). When text should contain spaces, either specify these by using underscores or place the text between double quotes.
:Exception: when the text attribute is the last attribute on a line, spaces are allowed (no confusion will arise where the text stops and the next attribute starts, that is—to be precise—when no colons occur in the text).

<small>Example: (the following are all equivalent)</small>

<pre>
BarData =
  text:Japanese_mandate_since_1914 bar:Marshalls

BarData =
  text:"Japanese mandate since 1914" bar:Marshalls

BarData =
  bar:Marshalls text:Japanese mandate since 1914
</pre>

:3). In data lines following command [[#TextData|TextData]] one character has special meaning:
:'''^''' (caret) means ''tab''

<small>Example showing tabs:</small>
<syntaxhighlight lang="moin">
TextData =
  tabs:(4-right,12-right,14-left,34-left)
  text:^1^1940^27/9^Berlin Ger,It,Jap sign Tripartite Pact
  text:^10^1944^1-22/7^Bretton Woods 44 nations establish
  text:^^^^^IMF and World Bank

# will be shown as:
#
#      1    27/9 Berlin Ger,It,Jap sign Tripartite Pact
#     10  1-22/7 Bretton Woods 44 nations establish
#                                    IMF and World Bank
</syntaxhighlight>

----

== Clickable maps ==
Both output formats available in MediaWiki, i.e. PNG and SVG, can contain clickable links. Texts shown in blue, and bars, may then be clicked, to surf to another web page.

Links can be specified with commands [[#BarData|BarData]], [[#PlotData|PlotData]] and [[#TextData|TextData]],
either with attribute ''link'', or as embedded links, via attribute ''text''.

You can specify one link per text segment.

=== Embedded links ===
Embedded links are links that are (part of a) displayable text, specified
with attribute ''text''. Their counterpart are explicit links (URL only)
which are defined with attribute ''link''.

Both type of links can be specified with commands [[#BarData|BarData]], [[#PlotData|PlotData]] and [[#TextData|TextData]] and are used for [[#Clickable maps|clickable maps]].

In embedded links, internal link style is as usual, interwiki link style does not work, external link style is as usual with single brackets, but here with a pipe instead of a space.

Examples:
<pre>
  <nowiki>text:example [[Help:Link]] internal link</nowiki>
</pre>
will be shown as:
<timeline font="unifont">
ImageSize = width:380 height:25
PlotArea  = width:380 height:25 left:0 bottom:0
TimeAxis  = orientation:vertical # dummy, required
Period    = from:0 till:1 # dummy, required
Colors    =
  id:canvas value:rgb(1,1,0.85)
BackgroundColors = canvas:canvas
TextData  =
  pos:(10,10) fontsize:XL text:"example [[Help:Link]] internal link"
</timeline>
<pre>
  <nowiki>text:[[Help:Link|Link]]</nowiki>
</pre>
will be shown as:
<timeline font="unifont">
ImageSize = width:380 height:25
PlotArea  = width:380 height:25 left:0 bottom:0
TimeAxis  = orientation:vertical # dummy, required
Period    = from:0 till:1 # dummy, required
Colors    =
  id:canvas value:rgb(1,1,0.85)
BackgroundColors = canvas:canvas
TextData  =
  pos:(10,10) fontsize:XL text:"[[Help:Link|Link]]"
</timeline>

<pre>
  <nowiki>text:[http://en.wikipedia.org/wiki/Rembrandt|Rembrandt van Rijn] paints Night Watch</nowiki>
</pre>
will be shown as:
<timeline font="unifont">
ImageSize = width:380 height:25
PlotArea  = width:380 height:25 left:0 bottom:0
TimeAxis  = orientation:vertical # dummy, required
Period    = from:0 till:1 # dummy, required
Colors    =
  id:canvas value:rgb(1,1,0.85)
BackgroundColors = canvas:canvas
TextData  =
  pos:(10,10) fontsize:XL text:"[http://en.wikipedia.org/wiki/Rembrandt|Rembrandt van Rijn] paints Night Watch"
</timeline>

Attempt to use interwiki link style:

<pre>
  <nowiki>text:[[Main_Page]]</nowiki>
</pre>
 and similar with nl: and m: give:
<timeline font="unifont">
ImageSize = width:380 height:25
PlotArea  = width:380 height:25 left:0 bottom:0
TimeAxis  = orientation:vertical # dummy, required
Period    = from:0 till:1 # dummy, required
Colors    =
  id:canvas value:rgb(1,1,0.85)
BackgroundColors = canvas:canvas
TextData  =
  pos:(10,10) fontsize:XL text:"[[Main_Page]]"
</timeline>

<timeline font="unifont">
ImageSize = width:380 height:25
PlotArea  = width:380 height:25 left:0 bottom:0
TimeAxis  = orientation:vertical # dummy, required
Period    = from:0 till:1 # dummy, required
Colors    =
  id:canvas value:rgb(1,1,0.85)
BackgroundColors = canvas:canvas
TextData  =
  pos:(10,10) fontsize:XL text:""
</timeline>

<timeline font="unifont">
ImageSize = width:380 height:25
PlotArea  = width:380 height:25 left:0 bottom:0
TimeAxis  = orientation:vertical # dummy, required
Period    = from:0 till:1 # dummy, required
Colors    =
  id:canvas value:rgb(1,1,0.85)
BackgroundColors = canvas:canvas
TextData  =
  pos:(10,10) fontsize:XL text:"[[m:Main_Page]]"
</timeline>

The third one to Meta-Wikipedia works properly, except from Meta itself, the other links work like [[Main Page]] (internal page, the prefix is ignored) or e.g. {{SERVER}}/w/Main_Page (gives File not found), depending on the URL of the referring page (e.g. different for a preview page and a diff page).

'''Special characters:'''

Blank spaces and underscores in the url should be written as %20.

The tilde character ('''~''') is normally interpreted as line break. When a tilde is part of an url write it as is two tildes.<br />
For example, link to ''www.site.com/~mysite'' as:
<pre>
  <nowiki>text:[www.site.com/~~mysite|My site]</nowiki>
</pre>

The number sign ('''#''') is normally interpreted as start of comment. When a number sign is part of an url make sure the text is embedded in double quotes as follows:
<pre>
  <nowiki>text:"More at [www.site.com/~~mysite#section2|My site]"</nowiki>
</pre>

Actually it may be a good idea to always put texts between double quotes.
----

== Font support ==
Timeline has somewhat limited Unicode support. It uses FreeSans.ttf font, which supports a subset of all the possible glyphs (it supports [[Cyrillic alphabet]], east-Europe diactrics and kana for instance, but lacks [[kanji]]). You can also specify {{para|font|freesanswmf}} or {{para|font|unifont}} to specify a different font, or do the rendering in a completely different way with {{para|method|svg2png}}.

<small>Example:</small>
<syntaxhighlight lang="tf">
ImageSize = width:180 height:90
PlotArea  = width:180 height:90 left:0 bottom:0
TimeAxis  = orientation:vertical #dummy
Colors    =
  id:gray  value:gray(0.95)
Backgroundcolors = canvas:gray
Period   = from:1 till:2 # dummy
TextData=
  pos:(10,90) fontsize:L text:"维基百科"
  pos:(10,70) fontsize:L text:"Zażółć gęślą jaźń"
  pos:(10,50) fontsize:L text:"ウィキペディア"
</syntaxhighlight>
will be shown as:
<timeline>
ImageSize = width:180 height:90
PlotArea  = width:180 height:90 left:0 bottom:0
TimeAxis  = orientation:vertical #dummy
Colors    =
  id:gray  value:gray(0.95)
Backgroundcolors = canvas:gray
Period   = from:1 till:2 # dummy
TextData=
  pos:(10,90) fontsize:L text:"维基百科"
  pos:(10,70) fontsize:L text:"Zażółć gęślą jaźń"
  pos:(10,50) fontsize:L text:"ウィキペディア"
</timeline>

As a legacy of bitmap font usage, only five font tags are predefined. They will render at slightly different sizes in PNG and SVG images to produce optimal readability for both platforms.
It is advised to use these tags instead of numbers whenever possible.
They are: XS=eXtra Small, S=Small (default), M=Medium, L=Large, XL=eXtra large

<timeline>
ImageSize = width:130 height:90
PlotArea  = width:130 height:90 left:0 bottom:0
TimeAxis  = orientation:vertical #dummy
Colors    =
  id:gray  value:gray(0.95)
Backgroundcolors = canvas:gray
Period   = from:1 till:2 # dummy
TextData =
  pos:(10,70) fontsize:XS text:"fontsize:XS"
  pos:(10,58) fontsize:S  text:"fontsize:S"
  pos:(10,41) fontsize:M  text:"fontsize:M"
  pos:(10,25) fontsize:L  text:"fontsize:L"
  pos:(10,7)  fontsize:XL text:"fontsize:XL"
</timeline>

This documentation is originally a wikified version of the [http://infodisiac.com/Wikipedia/EasyTimeline/Syntax.htm original EasyTimeline documentation].

== EasyTimeline code with template parameters==
To render template parameters you must use <code><nowiki>{{#tag:</nowiki></code> syntax. As an example:
<syntaxhighlight lang="wikitext">
{{#tag:timeline|
ImageSize = width:280 height:25
PlotArea  = width:280 height:25 left:0 bottom:0
TimeAxis  = orientation:vertical # dummy, required
Period    = from:0 till:1 # dummy, required
Colors    =
  id:canvas value:rgb(1,1,0.85)
BackgroundColors = canvas:canvas
TextData  =
  pos:(10,10) fontsize:XL text:"a"
}}
</syntaxhighlight>
renders as

{{#tag:timeline|
ImageSize = width:280 height:25
PlotArea  = width:280 height:25 left:0 bottom:0
TimeAxis  = orientation:vertical # dummy, required
Period    = from:0 till:1 # dummy, required
Colors    =
  id:canvas value:rgb(1,1,0.85)
BackgroundColors = canvas:canvas
TextData  =
  pos:(10,10) fontsize:XL text:"a"
}}


Example a political timeline
<syntaxhighlight lang="wikitext">
{{#tag:timeline|
ImageSize = width:1010 height:auto barincrement:25
PlotArea  = top:30 bottom:90 right:130 left:3
AlignBars = late

Define $today = {{#time:d/m/Y}}

DateFormat = dd/mm/yyyy
Period     = from:01/01/1865 till:31/12/{{#time:Y|+1 year}}
TimeAxis   = orientation:horizontal

Colors     =
 id:Liberal         value:rgb(0.92,0.43,0.42) legend: Liberal_Party_of_Canada
 id:OldConservative value:rgb(0.6,0.6,1)      legend: Conservative_Party_→_Progressive_Conservative_Party
 id:Conservative    value:rgb(0.39,0.58,0.93) legend: Conservative_Party_of_Canada
 id:gray1           value:gray(0.8)
 id:gray2           value:gray(0.9)
 id:grid            value:gray(0.5)

ScaleMajor = gridcolor:gray1 unit:year increment:10 start:1870
ScaleMinor = gridcolor:gray2 unit:year increment:2  start:1868

Legend     = columns:1 left:150 top:60 columnwidth:230

TextData =
  pos:(20,65) textcolor:black fontsize:M
  text:"Political parties:"

BarData = 
 bar:Macdonald
 bar:Mackenzie
 bar:Abbott
 bar:JSDT
 bar:Bowell
 bar:Tupper
 bar:Laurier
 bar:Borden
 bar:Meighen
 bar:WLMK
 bar:Bennett
 bar:St.Laurent
 bar:Diefenbaker
 bar:Pearson
 bar:PTrudeau
 bar:Clark
 bar:Turner
 bar:Mulroney
 bar:Campbell
 bar:Chretien
 bar:Martin
 bar:Harper
 bar:JTrudeau
 bar:Carney

PlotData=
  width:7 align:left fontsize:S shift:(5,-4) anchor:till
 
 bar:Macdonald
  from: 01/07/1867 till: 05/11/1873 color:OldConservative
  from: 17/10/1878 till: 06/06/1891 color:OldConservative text:"[[John A. Macdonald]]" fontsize:10
 bar:Mackenzie
  from: 07/11/1873 till: 08/10/1878 color:Liberal         text:"[[Alexander Mackenzie (politician)|Alexander Mackenzie]]" fontsize:10
 bar:Abbott
  from: 16/06/1891 till: 24/11/1892 color:OldConservative text:"[[John Abbott]]" fontsize:10
 bar:JSDT
  from: 05/12/1892 till: 12/12/1894 color:OldConservative text:"[[John Sparrow David Thompson]]" fontsize:10
 bar:Bowell
  from: 21/12/1894 till: 27/04/1896 color:OldConservative text:"[[Mackenzie Bowell]]" fontsize:10
 bar:Tupper
  from: 01/05/1896 till: 08/07/1896 color:OldConservative text:"[[Charles Tupper]]" fontsize:10
 bar:Laurier
  from: 11/07/1896 till: 06/10/1911 color:Liberal         text:"[[Wilfrid Laurier]]" fontsize:10
 bar:Borden
  from: 10/10/1911 till: 10/07/1920 color:OldConservative text:"[[Robert Borden]]" fontsize:10
 bar:Meighen
  from: 10/07/1920 till: 29/12/1921 color:OldConservative
  from: 28/06/1926 till: 29/06/1926 color:OldConservative text:"[[Arthur Meighen]]" fontsize:10
 bar:WLMK
  from: 29/12/1921 till: 28/06/1926 color:Liberal
  from: 25/09/1926 till: 07/08/1930 color:Liberal
  from: 23/10/1935 till: 15/11/1948 color:Liberal         text:"[[William Lyon Mackenzie King]]" fontsize:10
 bar:Bennett
  from: 07/08/1930 till: 23/10/1935 color:OldConservative text:"[[R. B. Bennett]]" fontsize:10
 bar:St.Laurent
  from: 15/11/1948 till: 21/06/1957 color:Liberal         text:"[[Louis St. Laurent]]" fontsize:10
 bar:Diefenbaker
  from: 21/06/1957 till: 22/04/1963 color:OldConservative text:"[[John Diefenbaker]]" fontsize:10
 bar:Pearson
  from: 22/04/1963 till: 20/04/1968 color:Liberal         text:"[[Lester B. Pearson]]" fontsize:10
 bar:PTrudeau
  from: 20/04/1968 till: 04/06/1979 color:Liberal
  from: 03/03/1980 till: 30/06/1984 color:Liberal         text:"[[Pierre Trudeau]]" fontsize:10
 bar:Clark
  from: 04/06/1979 till: 03/03/1980 color:OldConservative text:"[[Joe Clark]]" fontsize:10
 bar:Turner
  from: 30/06/1984 till: 17/09/1984 color:Liberal         text:"[[John Turner]]" fontsize:10
 bar:Mulroney
  from: 17/09/1984 till: 25/06/1993 color:OldConservative text:"[[Brian Mulroney]]" fontsize:10
 bar:Campbell
  from: 25/06/1993 till: 04/11/1993 color:OldConservative text:"[[Kim Campbell]]" fontsize:10
 bar:Chretien
  from: 04/11/1993 till: 12/12/2003 color:Liberal         text:"[[Jean Chrétien]]" fontsize:10
 bar:Martin
  from: 12/12/2003 till: 06/02/2006 color:Liberal         text:"[[Paul Martin]]" fontsize:10
 bar:Harper
  from: 06/02/2006 till: 04/11/2015 color:Conservative    text:"[[Stephen Harper]]" fontsize:10
 bar:JTrudeau
  from: 04/11/2015 till: 14/03/2025 color:Liberal         text:"[[Justin Trudeau]]" fontsize:10
 bar:Carney
  from: 14/03/2025 till: $today     color:Liberal         text:"[[Mark Carney]]" fontsize:10
}}
</syntaxhighlight>

renders as
{{#tag:timeline|
ImageSize = width:1010 height:auto barincrement:25
PlotArea  = top:30 bottom:90 right:130 left:3
AlignBars = late

Define $today = {{#time:d/m/Y}}

DateFormat = dd/mm/yyyy
Period     = from:01/01/1865 till:31/12/{{#time:Y|+1 year}}
TimeAxis   = orientation:horizontal

Colors     =
 id:Liberal         value:rgb(0.92,0.43,0.42) legend: Liberal_Party_of_Canada
 id:OldConservative value:rgb(0.6,0.6,1)      legend: Conservative_Party_→_Progressive_Conservative_Party
 id:Conservative    value:rgb(0.39,0.58,0.93) legend: Conservative_Party_of_Canada
 id:gray1           value:gray(0.8)
 id:gray2           value:gray(0.9)
 id:grid            value:gray(0.5)

ScaleMajor = gridcolor:gray1 unit:year increment:10 start:1870
ScaleMinor = gridcolor:gray2 unit:year increment:2  start:1868

Legend     = columns:1 left:150 top:60 columnwidth:230

TextData =
  pos:(20,65) textcolor:black fontsize:M
  text:"Political parties:"

BarData = 
 bar:Macdonald
 bar:Mackenzie
 bar:Abbott
 bar:JSDT
 bar:Bowell
 bar:Tupper
 bar:Laurier
 bar:Borden
 bar:Meighen
 bar:WLMK
 bar:Bennett
 bar:St.Laurent
 bar:Diefenbaker
 bar:Pearson
 bar:PTrudeau
 bar:Clark
 bar:Turner
 bar:Mulroney
 bar:Campbell
 bar:Chretien
 bar:Martin
 bar:Harper
 bar:JTrudeau
 bar:Carney

PlotData=
  width:7 align:left fontsize:S shift:(5,-4) anchor:till
 
 bar:Macdonald
  from: 01/07/1867 till: 05/11/1873 color:OldConservative
  from: 17/10/1878 till: 06/06/1891 color:OldConservative text:"[[John A. Macdonald]]" fontsize:10
 bar:Mackenzie
  from: 07/11/1873 till: 08/10/1878 color:Liberal         text:"[[Alexander Mackenzie (politician)|Alexander Mackenzie]]" fontsize:10
 bar:Abbott
  from: 16/06/1891 till: 24/11/1892 color:OldConservative text:"[[John Abbott]]" fontsize:10
 bar:JSDT
  from: 05/12/1892 till: 12/12/1894 color:OldConservative text:"[[John Sparrow David Thompson]]" fontsize:10
 bar:Bowell
  from: 21/12/1894 till: 27/04/1896 color:OldConservative text:"[[Mackenzie Bowell]]" fontsize:10
 bar:Tupper
  from: 01/05/1896 till: 08/07/1896 color:OldConservative text:"[[Charles Tupper]]" fontsize:10
 bar:Laurier
  from: 11/07/1896 till: 06/10/1911 color:Liberal         text:"[[Wilfrid Laurier]]" fontsize:10
 bar:Borden
  from: 10/10/1911 till: 10/07/1920 color:OldConservative text:"[[Robert Borden]]" fontsize:10
 bar:Meighen
  from: 10/07/1920 till: 29/12/1921 color:OldConservative
  from: 28/06/1926 till: 29/06/1926 color:OldConservative text:"[[Arthur Meighen]]" fontsize:10
 bar:WLMK
  from: 29/12/1921 till: 28/06/1926 color:Liberal
  from: 25/09/1926 till: 07/08/1930 color:Liberal
  from: 23/10/1935 till: 15/11/1948 color:Liberal         text:"[[William Lyon Mackenzie King]]" fontsize:10
 bar:Bennett
  from: 07/08/1930 till: 23/10/1935 color:OldConservative text:"[[R. B. Bennett]]" fontsize:10
 bar:St.Laurent
  from: 15/11/1948 till: 21/06/1957 color:Liberal         text:"[[Louis St. Laurent]]" fontsize:10
 bar:Diefenbaker
  from: 21/06/1957 till: 22/04/1963 color:OldConservative text:"[[John Diefenbaker]]" fontsize:10
 bar:Pearson
  from: 22/04/1963 till: 20/04/1968 color:Liberal         text:"[[Lester B. Pearson]]" fontsize:10
 bar:PTrudeau
  from: 20/04/1968 till: 04/06/1979 color:Liberal
  from: 03/03/1980 till: 30/06/1984 color:Liberal         text:"[[Pierre Trudeau]]" fontsize:10
 bar:Clark
  from: 04/06/1979 till: 03/03/1980 color:OldConservative text:"[[Joe Clark]]" fontsize:10
 bar:Turner
  from: 30/06/1984 till: 17/09/1984 color:Liberal         text:"[[John Turner]]" fontsize:10
 bar:Mulroney
  from: 17/09/1984 till: 25/06/1993 color:OldConservative text:"[[Brian Mulroney]]" fontsize:10
 bar:Campbell
  from: 25/06/1993 till: 04/11/1993 color:OldConservative text:"[[Kim Campbell]]" fontsize:10
 bar:Chretien
  from: 04/11/1993 till: 12/12/2003 color:Liberal         text:"[[Jean Chrétien]]" fontsize:10
 bar:Martin
  from: 12/12/2003 till: 06/02/2006 color:Liberal         text:"[[Paul Martin]]" fontsize:10
 bar:Harper
  from: 06/02/2006 till: 04/11/2015 color:Conservative    text:"[[Stephen Harper]]" fontsize:10
 bar:JTrudeau
  from: 04/11/2015 till: 14/03/2025 color:Liberal         text:"[[Justin Trudeau]]" fontsize:10
 bar:Carney
  from: 14/03/2025 till: $today     color:Liberal         text:"[[Mark Carney]]" fontsize:10
}}

{{Wikipedia technical help|collapsed}}
[[Category:Wikipedia image help]]