View source for Funitel

{{Short description|Type of aerial lift}}
[[Image:Funitel Fond.JPG|thumb|right|Funitel at [[Val Thorens]], France]]

A '''funitel''' is a type of [[cableway]], generally used to transport skiers, although at least one is used to transport finished cars between different areas of a factory.<ref>{{Citation|title=Doppelmayr Funitel VW Bratislava, Slowakei (2002)|url=https://www.youtube.com/watch?v=CQIwI7QKqO4 |archive-url=https://ghostarchive.org/varchive/youtube/20211212/CQIwI7QKqO4| archive-date=2021-12-12 |url-status=live|language=de|access-date=2020-01-08}}{{cbignore}}</ref>  It differs from a standard [[gondola lift]] through the use of two arms attached to two parallel overhead cables, providing more stability in high winds. The name ''funitel'' is a [[portmanteau]] of the French words ''[[funiculaire]]'' and ''[[téléphérique]]''.  

When used to transport skiers, funitels are a fast way to get to a higher altitude. [[Skis]] or [[snowboard|snowboards]] have to be taken off and held during the trip. Depending on the configuration, cabins may or may not contain seats. Without seats, funitels can sometimes be uncomfortable for long trips, in the same way other large cable cars can be. Funitels combine a short time between successive cabins with a capacity of around 20 to 30 people per cabin.<ref>[http://www.seilbahntechnik.net/lifte/Ort/funitel/page1.php Lift-World :: Lift-Database - Funitels<!-- Bot generated title -->] {{webarchive |url=https://web.archive.org/web/20120210134151/http://www.seilbahntechnik.net/lifte/Ort/funitel/page1.php |date=February 10, 2012 }}</ref>

==Overview==
{{multiple image
|direction=vertical
|total_width=230
|align=right
|image1  =Yamagata-zao ski 1 (200712).jpg
|image2  =Zao 2006 Ropeway Station.jpg
|footer  =Funitel in [[Zaō Onsen]], Japan. The bottom image shows inside one of the stations
}}
{{multiple image
|direction=vertical
|total_width=230
|align=right
|image1  =funitel 1.jpg
|image2  =Squaw Valley Funitel Olympic Valley.jpg
|footer  =[[Palisades Tahoe]] funitel
}}
A funitel installation employs two cables (or a single cable arranged in two loops) strung between two terminals and supported by intermediate [[towers]]. During transit from terminal to terminal each of a series of detachable passenger cabins is suspended from the two cables which move in parallel at exactly the same rate. The technology was developed from the [[Double Monocable Creissels]] (DMC) lift, which featured two so-called monocables (supplying both support and propulsion) moving in parallel and spaced about one meter apart. This technology was developed by the French engineering company Denis Creissels SA and was manufactured by [[Poma]] in the 1980s. In the 1990s the first funitels were built, differing from earlier DMC lifts by having the two cables spaced far enough apart for the cabin to be hung between the cables, instead of underneath, thus eliminating the need for a long hanger arm which makes the carrier assembly susceptible to swinging in strong winds. The two cables in these early funitel installations have separate tensioning systems and separate, electrically synchronized motors, one for each cable. Later the '''double-loop monocable''' (DLM) was developed, featuring a single cable looped around twice, as the diagram below shows. DLM ensures that the cable sections from which a cabin is suspended move at the same speed without motor synchronization.

The first funitel was constructed in [[Val-Thorens]], 1990, by Denis Creissels SA and Enterprises Reel and Städeli-Lift. The first funitel-style lift constructed outside Europe was near Mammoth Mountain, California at [[June Mountain ski area]], built by [[Yan Lift]] in 1988. Jan Kunczynski, the owner of Yan, actually claimed to have invented the funitel lift with reference to US Patent 4,848,241.<ref>{{cite web |title=Aerial tramway system and method having parallel haul ropes |url=https://patents.justia.com/patent/4848241 |access-date=5 April 2022 }}</ref> The Yan "QMC" differed, however, from other funitels in having a quad-monocable design with vertically aligned drive sheaves.<ref>{{cite web |title=QMC Debuts at June Mountain |url=https://www.seilbahnen.org/de/index.php?section=downloads&cmd=266&download=12217 |access-date=5 April 2022 }}</ref> The QMC suffered from various design flaws including the famously unsafe Yan cable grips<ref>{{cite web |title=Yan High Speed Quad Retrofits 20 Years Later |date=15 March 2016 |url=https://liftblog.com/2016/03/15/yan-high-speed-quads-20-years-later| access-date=5 April 2022 }}</ref> and was shut down by California safety inspectors in 1996 and dismantled over the course of the next few years.

[[Image:Funi Space Talstation.jpg|thumb|right|The funitel at [[Verbier]], Switzerland. An evacuation line runs above the funitel]]
Funitel passenger cabins are connected to the overhead cable sections with four spring-loaded grips — two for each cable section. As with other detachable-carrier lifts the cabins are decelerated and detached from the cables at the terminal for boarding, then accelerated and reattached for transit to the other terminal.
{{multiple image
|direction=horizontal
|total_width=460
|align=center
|image1  =Funitel Diagram.svg
|caption1=Diagram of where the cabins detach and attach
|image2  =DLM diagram.svg
|caption2=Diagram of the double-loop monocable (DLM) system. The circle and white arrow represent the drive
}}

===Reversible funitel===
[[File:Funitel de Rocharbois, seen from the Rochebrune side, Megève, 2025.jpg|thumb|The reversible funitel ''Rocharbois'' in Megève]]
In 1985 [[Poma]] produced a reversible funitel in [[Megève]], France. This system was originally referred to as a DMC lift, although it uses the configuration which would later become known as DLM. Unlike a modern funitel, the cable on this system does not move uninterruptedly. Instead, the system operates in a similar manner to an [[aerial tramway]], with two large cabins shuttling back-and-forth. These cabins do not detach from the cable in normal operation.<ref>{{cite web |title=FUN V 75 Rocharbois |url=https://www.remontees-mecaniques.net/bdd/reportage-fun-v-75-rocharbois-poma-4761.html |website=remontees-mecaniques.net |access-date=22 September 2020 |language=fr |date=3 November 2019}}</ref> A similar system was built in 1993, in [[Montmorency Falls Park]], Canada, by the French and Canadian subsidiaries of Doppelmayr.<ref name="Montmorency Park">{{cite web |title=FUN V of Montmorency Park |url=https://www.remontees-mecaniques.net/bdd/reportage-fun-v-du-parc-de-montmorency-doppelmayr-4186.html |website=remontees-mecaniques.net |access-date=22 September 2020 |date=24 March 2012}}</ref>

In 2002, Poma installed a reversible funitel in [[Val Thorens]], France. Instead of two large cabins, this system features two groups of three smaller cabins shuttling back-and-forth.<ref>{{cite web |title=Funitel of the 3 Valleys |url=https://www.skiresort.info/ski-resort/les-3-vallees-val-thorensles-menuiresmeribelcourchevel/ski-lifts/l1278/ |website=skiresort.info |access-date=21 September 2020}}</ref> A similar system was built by Doppelmayr in 2004, in [[Alpe d'Huez]], France.<ref name="Marmottes 3">{{cite web |title=FUN V des Marmottes 3 |url=https://www.remontees-mecaniques.net/bdd/reportage-fun-v-des-marmottes-3-doppelmayr-5735.html |website=remontees-mecaniques.net |access-date=22 September 2020 |language=fr |date=28 March 2017}}</ref> Another similar system in Val Thorens was built by the Swiss manufacturer, Bartholet, in 2011.<ref>{{cite web |title=Funitel in Val Thorens, France |url=https://www.bartholet.swiss/en/ropeways/funitel/funitel-val-thorens-france |website=Bartholet |access-date=21 September 2020}}</ref>

==List of funitels==
{{multiple image
|direction=vertical
|total_width=230
|align=right
|image1  =Hakone Ropeway 2.jpg
|image2  =Hakone ropeway 03.jpg
|footer  =[[Hakone Ropeway]] in Japan
}}

===Andorra===
*[[Encamp]] sector, [[Grandvalira]] ski resort

===Austria===
*[[St. Anton am Arlberg]]
*[[Ischgl]]
*Kitzsteinhorn ([[Kaprun]])
*[[Hintertux]]

===Canada===
*[[Montmorency Falls]], [[Quebec City]]

===France===
*[[Val-Thorens]]
*[[La Plagne]]: Built by [[Doppelmayr Garaventa Group|Doppelmayr]] it runs from Plagne Centre (1970m) up to La Grande Rochette (2505m).
*[[L'Alpe d'Huez]]
*[[Super Besse]]
*[[Les Deux Alpes]]

===Greece===
*[[Athens]]: [[Parnitha Funitel]]

===Japan===
*[[Hashikurasan Ropeway]], [[Miyoshi, Tokushima|Miyoshi]], [[Tokushima Prefecture|Tokushima]]
*[[Hakone Ropeway]], [[Hakone, Kanagawa|Hakone]], [[Kanagawa Prefecture|Kanagawa]]
*[[Tanigawadake Ropeway]], [[Mount Tanigawa|Tanigawadake]] Tenjindaira Ski Resort, [[Minakami, Gunma|Minakami]], [[Gunma Prefecture|Gunma]]
*[[Zaō Ropeway]], Yamagata [[Zao Onsen|Zaō Onsen]] Ski Resort, [[Yamagata, Yamagata|Yamagata]], [[Yamagata Prefecture|Yamagata]]

===Slovakia===
*[[Bratislava]] – used to transport cars in [[Volkswagen]] factory
*[[Jasná]] - ski resort

===Switzerland===
*[[Verbier]]
*[[Crans-Montana]]

===United States===
*[[Palisades Tahoe]]

==See also==
*[[List of aerial lift manufacturers]]
*[[Lift Engineering]] (built the QMC funitel - a funitel that actually had four cables)

==References==
{{reflist}}

==External links==
{{Commons}}
*[http://www.doppelmayr.com/en/doppelmayr-international/products/funitel.html?country=all Doppelmayr funitel Page] {{Webarchive|url=https://web.archive.org/web/20130329112645/http://www.doppelmayr.com/en/doppelmayr-international/products/funitel.html?country=all |date=2013-03-29 }}
*[http://www.poma.net/en/project/index/view/id/25 Poma funitel page] {{Webarchive|url=https://web.archive.org/web/20130608031112/http://www.poma.net/en/project/index/view/id/25 |date=2013-06-08 }}

{{SkiLift}}
{{Skiing}}

[[Category:Aerial lifts]]
[[Category:Types of ski lift]]