View source for Dc (computer program)

{{Short description|Cross-platform reverse-Polish calculator program}}
{{lowercase|title=dc (Unix)}}
{{Infobox software
| name                   = dc
| logo                   = 
| screenshot             = 
| screenshot size        = 
| caption                = 
| author                 = [[Lorinda Cherry]], [[Robert Morris (cryptographer)|Robert Morris]]<br />([[AT&T Bell Laboratories]])
| developer              = Various [[open-source software|open-source]] and [[commercial software|commercial]] developers
| released               = 
| latest release version = 
| latest release date    = 
| programming language   = [[B (programming language)|B]]
| operating system       = [[Unix]], [[Unix-like]],  [[Plan 9 from Bell Labs|Plan 9]]
| platform               = [[Cross-platform]]
| genre                  = [[Command (computing)|Command]]
| license                = 
| website                = 
}}
'''dc''' (''desk calculator'') is a [[cross-platform]] [[reverse Polish notation|reverse-Polish]] calculator which supports [[arbitrary-precision arithmetic]].<ref>{{man|1|dc|die.net|an arbitrary precision calculator}}</ref> It was written by [[Lorinda Cherry]] and [[Robert Morris (cryptographer)|Robert Morris]] at [[Bell Labs]].<ref name="reader" /> It is one of the oldest [[Unix]] utilities, preceding even the invention of the [[C (programming language)|C programming language]]. Like other utilities of that vintage, it has a powerful set of features but terse syntax.<ref>{{cite web
|url=http://plan9.bell-labs.com/7thEdMan/vol2/dc
|title=The sources for the manual page for 7th Edition Unix dc
|access-date=2004-06-23
|archive-date=2004-08-23
|archive-url=https://web.archive.org/web/20040823221918/http://plan9.bell-labs.com/7thEdMan/vol2/dc
|url-status=dead
}}</ref><ref>{{cite web
|author=Ritchie, Dennis M. 
|date=Sep 1979 
|url=http://cm.bell-labs.com/cm/cs/who/dmr/hist.html 
|title=The Evolution of the Unix Timesharing System 
|url-status=dead 
|archive-url=http://webarchive.loc.gov/all/20100506231949/http://cm.bell-labs.com/cm/cs/who/dmr/hist.html
|archive-date=2010-05-06
}}</ref>
Traditionally, the [[bc (programming language)|bc]] calculator program (with [[infix notation]]) was implemented on top of dc, now the implementation of GNU dc bases on bc.<ref>{{cite web
|url=https://www.gnu.org/software/bc/
|title=GNU bc
|access-date=2025-01-25
}}</ref>

This article provides some examples in an attempt to give a general flavour of the language; for a complete list of commands and syntax, one should consult the [[man page]] for one's specific implementation.

==History==
dc is the oldest surviving [[Unix]] language program. When its home [[Bell Labs]] received a [[PDP-11]], dc{{em dash}}written in [[B (programming language)|B]]{{em dash}}was the first language to run on the new computer, even before an assembler.<ref name="reader">{{cite tech report |first1=M. D. |last1=McIlroy |authorlink1=Doug McIlroy |year=1987 |url=http://www.cs.dartmouth.edu/~doug/reader.pdf |title=A Research Unix reader: annotated excerpts from the Programmer's Manual, 1971–1986 |series=CSTR |number=139 |institution=Bell Labs}}</ref> [[Ken Thompson]] has opined that dc was the very first program written on the machine.<ref name="KenThompson">{{cite AV media|url=https://www.youtube.com/watch?v=EY6q5dv_B-o|people=Brian Kernighan and Ken Thompson|title=
A nerdy delight for any Vintage Computer Fest 2019 attendee: Kernighan interviewing Thompson about Unix|accessdate=September 3, 2019|publisher=YouTube|time=29m45s}}</ref>

==Basic operations==
To multiply four and five in dc (note that most of the [[Whitespace character|whitespace]] is optional):

<syntaxhighlight lang="console">
$ cat << EOF > cal.txt
4 5 *
p
EOF

$ dc cal.txt
20
$
</syntaxhighlight>

The results are also available from the commands:

<syntaxhighlight lang="console">
$ echo "4 5 * p" | dc
</syntaxhighlight>

or

<syntaxhighlight lang="console">
$ dc -
4 5*pq
20

$ dc
4 5 *
p
20
q

$ dc -e '4 5 * p'
</syntaxhighlight>

This translates into "push four and five onto the stack, then, with the multiplication operator, pop two elements from the stack, multiply them and push the result onto the stack." Then the <code>p</code> command is used to examine (print out to the screen) the top element on the stack. The <code>q</code> command quits the invoked instance of dc. Note that numbers must be spaced from each other even as some operators need not be.

The [[arithmetic precision]] is changed with the command <code>k</code>, which sets the number of fractional digits (the number of digits following the [[radix point|point]]) to be used for arithmetic operations. Since the default precision is zero, this sequence of commands produces <code>0</code> as a result:

<pre>
2 3 / p
</pre>

By adjusting the precision with <code>k</code>, an arbitrary number of decimal places can be produced. This command sequence outputs <code>.66666</code>.

<pre>
5 k
2 3 / p
</pre>

To evaluate <math>\sqrt{\left(12 + \left(-3\right)^4\right)\over11}-22</math>: (<code>v</code> computes the square root of the top of the stack and <code>_</code> is used to input a negative number):

<pre>
12 _3 4 ^ + 11 / v 22 -
p
</pre>

To swap the top two elements of the stack, use the <code>r</code> command. To duplicate the top element, use the <code>d</code> command.

==Input/output==
To read a line from [[stdin]], use the <code>?</code> command. This evaluates the line as if it were a dc command, and so it is necessary that it be syntactically correct and presents a potential security problem because the <code>!</code> dc command enables arbitrary command execution.

As mentioned above, <code>p</code> prints the top of the stack with a newline after it. <code>n</code> pops the top of the stack and prints it without a trailing newline. <code>f</code> prints the entire stack with one entry per line.

dc also supports arbitrary input and output [[radix|radices]]. The <code>i</code> command pops the top of the stack and uses it for the input base. Hex digits must be in upper case to avoid collisions with dc commands and are limited to A-F. The <code>o</code> command does the same for the output base, but keep in mind that the input base affects the parsing of every numeric value afterwards so it is usually advisable to set the output base first. Therefore <code>10o</code> sets the output radix to the current input radix, but generally not to 10 (ten). Nevertheless <code>Ao</code> resets the output base to 10 (ten), regardless of the input base. To read the values, the <code>K</code>, <code>I</code> and <code>O</code> commands push the current precision, input radix and output radix on to the top of the stack.

As an example, to convert from hex to binary:

<syntaxhighlight lang="console">
$ echo 16i2o DEADBEEFp | dc
11011110101011011011111011101111
</syntaxhighlight>

==Language features==

===Registers===
In addition to these basic arithmetic and stack operations, dc includes support for [[Macro (computer science)|macros]], conditionals and storing of results for later retrieval.

The mechanism underlying macros and conditionals is the '''register''', which in dc is a storage location with a single character name which can be stored to and retrieved from: <code>sc</code> pops the top of the stack and stores it in register c, and <code>lc</code> pushes the value of register c onto the stack. For example:

<pre>
3 sc 4 lc * p
</pre>

Registers can also be treated as secondary stacks, so values can be pushed and popped between them and the main stack using the <code>S</code> and <code>L</code> commands.

===Strings===
String values are enclosed in <code>[</code> and <code>]</code> characters and may be pushed onto the stack and stored in registers. The <code>a</code> command converts the low order byte of the numeric value into an [[ASCII#ASCII printable characters|ASCII]] character, or if the top of the stack is a string it replaces it with the first character of the string. There are no ways to build up strings or perform string manipulation other than executing it with the <code>x</code> command, or printing it with the <code>P</code> command.

The <code>#</code> character begins a comment to the end of the line.

===Macros===
Macros are then implemented by allowing registers and stack entries to be strings as well as numbers. A string can be printed, but it can also be executed (i.e. processed as a sequence of dc commands). So for instance we can store a macro to add one and then multiply by 2 into register m:

<pre>
[1 + 2 *] sm
</pre>

and then (using the <code>x</code> command which executes the top of the stack) we can use it like this:

<pre>
3 lm x p
</pre>

===Conditionals===
Finally, we can use this macro mechanism to provide conditionals. The command <code>=r</code> pops two values from the stack, and executes the macro stored in register <code>r</code> only if they are equal. So this prints the string <code>equal</code> only if the top two values on the stack are of equal value:

<pre>
[[equal]p] sr 5 5 =r
</pre>

Other conditionals are <code>></code>, <code>!></code>, <code><</code>, <code>!<</code>, <code>!=</code>, which execute the specified macro if the top two values on the stack are greater, less than or equal to ("not greater"), less than, greater than or equal to ("not less than"), and not equals, respectively. Note that the order of the operands in inequality comparisons is the opposite of the order for arithmetic; {{kbd|5 3 -}} evaluates to {{code|5 - 3 {{=}} 2}}, but {{kbd|5 3 <t}} runs the contents of the {{kbd|t}} register because {{code|3 < 5}}.

===Loops===
Looping is then possible by defining a macro which (conditionally) reinvokes itself. A simple factorial of the top of the stack might be implemented as:

<pre>
# F(x): return x!
# if x-1 > 1
#     return x * F(x-1)
# otherwise
#     return x
[d1-d1<F*]dsFxp
</pre>

The <code>1Q</code> command exits from a macro, allowing an early return. <code>q</code> quits from two levels of macros (and dc itself if there are less than two levels on the call stack). <code>z</code> pushes the current stack depth before the <code>z</code> operation.

==Examples==

===Summing the entire stack===

This is implemented with a macro stored in register <code>a</code> which conditionally calls itself, performing an addition each time, until only one value remains on the stack. The <code>z</code> operator is used to push the number of entries in the stack onto the stack. The comparison operator <code>&gt;</code> pops two values off the stack in making the comparison. 

<syntaxhighlight lang="bash">
dc -e "1 2 4 8 16 100 0d[+z1<a]dsaxp"
</syntaxhighlight>

And the result is 131.

===Summing all dc expressions as lines from file===

A bare number is a valid dc expression, so this can be used to sum a file where each line contains a single number. 

This is again implemented with a macro stored in register <code>a</code> which conditionally calls itself, performing an addition each time, until only one value remains on the stack. 

<syntaxhighlight lang="bash">
dc -e "0d[?+z1<a]dsaxp" < file
</syntaxhighlight>

The <code>?</code> operator reads another command from the input stream. If the input line contains a decimal number, that value is added to the stack. When the input file reaches end of file, the command is null, and no value is added to the stack.

<syntaxhighlight lang="bash">
{ echo "5"; echo "7"; } | dc -e "0d[?+z1<a]dsaxp"
</syntaxhighlight>

And the result is 12. 

The input lines can also be complex dc commands. 

<syntaxhighlight lang="bash">
{ echo "3 5 *"; echo "4 3 *"; echo "5dd++"; } | dc -e "0d[?+z1<a]dsaxp" 
</syntaxhighlight>

And the result is 42. 

Note that since dc supports arbitrary precision, there is no concern about numeric overflow or loss of precision, no matter how many lines the input stream contains, unlike a similarly concise solution in [[AWK]].

Downsides of this solution are: the loop stops on encountering a blank line in the input stream (technically, any input line which does not add at least one numeric value to the stack); and, for handling negative numbers, leading instances of '-' to denote a negative sign must be change to '_' in the input stream, because of dc's nonstandard negative sign. The <code>?</code> operator in dc does not provide a clean way to discern reading a blank line from reading end of file.

===Unit conversion===

As an example of a relatively simple program in dc, this command (in 1 line):

<syntaxhighlight lang="bash">
dc -e '[[Enter a number (metres), or 0 to exit]PAP]sh[q]sz[lhx?d0=zAk.0254/.5+0kC~1/rn[ feet ]Pn[ inches]PAPdx]dx'
</syntaxhighlight>

converts distances from metres to feet and inches; the bulk of it is concerned with prompting for input, printing output in a suitable format and looping around to convert another number.

===Greatest common divisor===

As an example, here is an implementation of the [[Euclidean algorithm]] to find the [[Greatest common divisor|GCD]]:

<syntaxhighlight lang="bash">
dc -e '??[dSarLa%d0<a]dsax+p'                  # shortest
dc -e '[a=]P?[b=]P?[dSarLa%d0<a]dsax+[GCD:]Pp' # easier-to-read version
</syntaxhighlight>

===Factorial===

Computing the [[factorial]] of an input value, <math>n! = \prod_{i=1}^n i</math>

<syntaxhighlight lang="bash">
dc -e '?[q]sQ[d1=Qd1-lFx*]dsFxp'
</syntaxhighlight>

===Quines in dc===

There exist also [[Quine (computing)|quines]] in the programming language dc; programs that produce its source code as output.

<syntaxhighlight lang="bash">
dc -e '[91Pn[dx]93Pn]dx'

dc -e '[91PP93P[dx]P]dx'
</syntaxhighlight>

===Printing all prime numbers===

<syntaxhighlight lang="sh">
dc -e '2p3p[dl!d2+s!%0=@l!l^!<#]s#[s/0ds^]s@[p]s&[ddvs^3s!l#x0<&2+l.x]ds.x'
</syntaxhighlight>
This program was written by Michel Charpentier. 
It outputs the sequence of prime numbers.
Note that shorter implementation is possible, which needs fourteen symbols fewer.
<syntaxhighlight lang="sh">
dc -e '2p3p[pq]s$[l!2+ds!l^<$dl!%0<#]s#[+dvs^1s!l#x2l.x]ds.x'
</syntaxhighlight>

===Integer factorization===

<syntaxhighlight lang="bash">
dc -e '[n=]P?[p]s2[lip/dli%0=1dvsr]s12sid2%0=13sidvsr[dli%0=1lrli2+dsi!>.]ds.xd1<2'
</syntaxhighlight>
This program was also written by Michel Charpentier.<ref>{{cite web
|url=https://tldp.org/LDP/abs/html/mathc.html
|title=Advanced Bash-Scripting Guide, Chapter 16, Example 16-52 (Factorization)
|access-date=2020-09-20
}}</ref> 

There is a shorter
<syntaxhighlight lang="bash">
dc -e "[n=]P?[lfp/dlf%0=Fdvsr]sF[dsf]sJdvsr2sf[dlf%0=Flfdd2%+1+sflr<Jd1<M]dsMx"
</syntaxhighlight>

and a faster solution (try with the 200-bit number {{math|2<sup>200</sup>-1}} (input <code>2 200^1-</code>)
<syntaxhighlight lang="bash">
dc -e "[n=]P?[lfp/dlf% 0=Fdvsr]sFdvsr2sfd2%0=F3sfd3%0=F5sf[dlf%0=Flfd4+sflr>M]sN[dlf%0=Flfd2+sflr>N]dsMx[p]sMd1<M" 
</syntaxhighlight>

Note that the latter can be sped up even more, if the access to a constant is replaced by a register access.

<syntaxhighlight lang="bash">
dc -e "[n=]P?[lfp/dlf%l0=Fdvsr]sF2s2dvsr2sf4s4d2%0=F3sfd3%0=F5sf[dlf%l0=Flfdl4+sflr>M]sN[dlf%l0=Flfdl2+sflr>N]dsMx[p]sMd1<M"
</syntaxhighlight>

===Calculating Pi===

An implementation of the [[Chudnovsky algorithm]] in the programming language dc. The program will print better and better approximations as it runs. But as pi is a transcendental number, the program will continue until interrupted or resource exhaustion of the machine it is run on.

<syntaxhighlight lang="bash">
dc -e '_640320[0ksslk3^16lkd12+sk*-lm*lhd1+sh3^/smlxlj*sxll545140134+dsllm*lxlnk/ls+dls!=P]sP3^sj7sn[6sk1ddshsxsm13591409dsllPx10005v426880*ls/K3-k1/pcln14+snlMx]dsMx'
</syntaxhighlight>

A fast divide and conquer implementation of the same formula that doubles in size each iteration. It evaluates a finite number if sums as an exact rational number and only performs one large division and square root per iteration. It is fast, but will still quickly slow down as the size of the fraction increases. 

<syntaxhighlight lang="bash">
dc -e '1Sk1SR13591409dSBSP426880dSQ4/3^9*SC[0r-]s-[lkE*1-k10005vlQ*lP/nAan0k]dSox[Lkd1+Skdd1+Sk3^lC*SQ2*1-d3*d*4-*dSR545140134LB+dSB*lk2%0=-SP]dszx[LRLRdLP*LPLQdLQ*SQ*+SP*SR]sc[d1-d0<yd0<yd0=z0=zlcx]sy0[lcxlox1+lyxllx]dslx'
</syntaxhighlight>

===Diffie–Hellman key exchange===

A more complex example of dc use embedded in a [[Perl]] script performs a [[Diffie–Hellman key exchange]]. This was popular as a [[signature block]] among [[cypherpunk]]s during the [[ITAR]] debates, where the short script could be run with only Perl and dc, ubiquitous programs on Unix-like operating systems:<ref>{{cite web
|url=http://www.cypherspace.org/adam/rsa/perl-dh.html
|title=Diffie–Hellman in 2 lines of Perl
|access-date=5 Jan 2009
|author=Adam Back
}}</ref>

<syntaxhighlight lang="perl">
#!/usr/bin/env perl -- -export-a-crypto-system-sig Diffie-Hellman-2-lines
($g, $e, $m) = @ARGV, $m || die "$0 gen exp mod\n";
print `echo "16dio1[d2%Sa2/d0<X+d*La1=z\U$m%0]SX$e"[$g*]\EszlXx+p | dc`
</syntaxhighlight>

A commented version is slightly easier to understand and shows how to use loops, conditionals, and the <code>q</code> command to return from a macro. With the GNU version of dc, the <code>|</code> command can be used to do arbitrary precision modular exponentiation without needing to write the X function.

<syntaxhighlight lang="perl">
#!/usr/bin/env perl

my ($g, $e, $m) = map { "\U$_" } @ARGV;
die "$0 gen exp mod\n" unless $m;

print `echo $g $e $m | dc -e '
# Hex input and output
16dio
# Read m, e and g from stdin on one line
?SmSeSg

# Function z: return g * top of stack
[lg*]sz

# Function Q: remove the top of the stack and return 1
[sb1q]sQ

# Function X(e): recursively compute g^e % m
# It is the same as Sm^Lm%, but handles arbitrarily large exponents.
# Stack at entry: e
# Stack at exit: g^e % m
# Since e may be very large, this uses the property that g^e % m == 
#     if( e == 0 )
#         return 1
#     x = (g^(e/2)) ^ 2
#     if( e % 2 == 1 )
#         x *= g
#     return x %
[
    d 0=Q   # return 1 if e==0 (otherwise, stack: e)
    d 2% Sa # Store e%2 in a (stack: e)
    2/      # compute e/2
    lXx     # call X(e/2)
    d*      # compute X(e/2)^2
    La1=z   # multiply by g if e%2==1
    lm %    # compute (g^e) % m
] SX

le          # Load e from the register
lXx         # compute g^e % m
p           # Print the result
'`;
</syntaxhighlight>

===Environment variables===
If the [[environment variable]] DC_LINE_LENGTH exists and contains an integer that is greater than 1 and less than <math>2^{16}-1</math>, the output of number digits (according to the output base) will be restricted to this value, inserting thereafter backslashes and newlines. The default line length is 70. The special value of 0 disables line breaks.

==See also==
* [[bc (programming language)]]
* [[Calculator input methods]]
* [[HP calculators]]
* [[Stack machine]]
* [[Reverse Polish notation]]

==References==
{{Reflist}}

==External links==
* Package [http://packages.debian.org/search?keywords=dc&searchon=names&exact=1&suite=all&section=all dc] in [[Debian GNU/Linux]] repositories
* newest Package [https://ftp.gnu.org/gnu/bc/bc-1.08.1.tar.xz GNU bc-1.08.1] including dc.
* {{man|1|dc|ManKier}}
* {{man|1|dc|Plan 9}}
* [http://gnuwin32.sourceforge.net/packages/bc.htm Native Windows port] of ''[[bc (programming language)|bc]]'', which includes dc.


{{Unix commands}}

[[Category:Cross-platform software]]
[[Category:Unix software]]
[[Category:Software calculators]]
[[Category:Free mathematics software]]
[[Category:Numerical programming languages]]
[[Category:Stack-oriented programming languages]]
[[Category:Plan 9 commands]]